Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹12.0 L+₹3,310 (0.28%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹12.2 L+₹20,795.50 (1.74%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹12.5 L+₹56,398 (4.72%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹12.7 L+₹77,098 (6.45%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹16.3 L
EMD Value
₹32,500
Closing Date
3 Mar 2021, 6:00 pmClosed
GE (S) Jaipur
GE(S) Jaipur, MES, Kalyan Marg, Banipark, Jaipur-302006
Spl repair to roof treatment of bldg No P-328 (BN store) and provn of roof treatment in Bldg No P-455 in zone-III area under GE(S) Jaipur
2021_MES_416933_1
GE (S)J-73P/2020-21 8628/ /E8
Open Tender
Civil Works
Item Rate
180 days
Jaipur
Class E Category a(i)
9 documents required · 9 mandatory
₹500
Yes
GE (S) Jaipur
₹32,500
Yes
5 Apr 2021
29 Jan 2021
5 Mar 2021
29 Jan 2021
3 Mar 2021
12 Feb 2021
29 Jan 2021 - 5 Feb 2021
Amount
18/SR Bldg/61SA/Q3W/2020-21 Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge. 18/SR - 38.25 52 /Rev - 2.00
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement. 18/SR - 1530 52 /Rev - 260
The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions.and finally applying one coat of Bitumen coat @ 1.2 Kg/Sqm over APP Membrane before application of Aluminium paint. 18/SR - 1530 52 /Rev - 260
M&L one coat of silver paint over APP Membrane all as specified and directed by Engineer -in - chage. 18/SR - 1530 52 /Rev - 260
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks & removing to store
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity including Dismantling water tanks & removing to store
S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair
M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of PVC cylindrical water tank of capacity 500/1000 liters using PCC 1:3:6 type C1 using 20mm graded stone aggregate with smooth finish
Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-
15 mm bore
20 mm bore
25 mm bore
Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM
M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified.
M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling
Hacking out old broken glass pane (any thickness, size, quality/ description) from metal/wood frame including punching or drilling out old glass panes, pins, springs, clips & providing & fixing new ones 3 mm thick plain sheet glass ordinary quality in square not exceeding 0.50 Sqm in each pane. glazed with oil putty.
S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane
M&L 50 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection
Supply only Integral water proofing compound
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls
S&F PVC (SWR) bends any radius 110mm dia
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls
S&F in repair Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions
All as per item No 24 above but of 25mm bore
Preparation of new plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying three coat of white wash all as specified and directed.
Preparing new plastered surfaces including scrapping and applying three coat of white wash on ceiling
Preparation of new plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying two coat of cement base paint all as specified and directed by Eng-in-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
S&F Coloured Glazed ceramic tilessize 300x450mm x 7mm thick edge cut/ joint free , on walls etc. set & jointed in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in CM(1:4)
S&F Coloured Non Skid ceramic tiles 6 to 7mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed in CM(1:4)
S/F Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe complete
S/F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm
S/F brass CP Angle stop cock fancy type concealled type long body,15 mm bore
S/F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-15mm
S/F 15mm bore Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete.
S/F PVC connections 15mm size with PTMT nuts of length 300mm
M&L Chromium plated Overhead Rain shower with relvoling joint and 115mm long shower arm with wall flange 15 mm bore fancy type any colour half turn (Make-MARC CAT PART NO MOR 1260 & 1240 or equivalent of GEM , JAQUAR) fixed in repair
S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity ( Make-HINDWARE CAT PART SLEEK PLUS or equivalent) fixed in repair
Dismantling of old U/S grating of any description or size and S&F PVC grating 125mm dia of weight not less than 40gm for floor trap / Nahani trap.
S&F in repairs vitreous china water closet Indian type 580 x 440 mm white with itergal footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as directed including flushing cistern and flushing pipe
S&F Soap dish vitreous china white approximate size 160 x 160 x 90mm equivalent
52/Rev/61SA/Q3W/2020-21: Providing cement concrete 1:2:4 type B0 in roof kerbs or mud stop rounded or chamfered
M&L for preparation of old plastered surfaces and applying two coats of oil bound distemper of approved shade/tint on ceiling all as specified & directed by Engineer-in-Charge
M&L for preparation of old plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on wall all as specified & directed by Engineer-in-Charge
Deep Construction Company
UNIVERSAL INFRAPROJECT PVT LTD
M/S Mohan Lal Gupta
S.R.Enterprises
J.J.ENGINEERING
Shiv Construction Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .