PROVN OF HARD STANDING WITH BOUNDARY WALL AT SINGLE LIVING OFFRS ACCN AT CH (CC) IN THE AREA OF AGE E/M (HOSP) UNDER GE E/M LUCKNOW

Amount

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for foundation,etc n.exc 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n'exc. 1.5 m above the starting point, complete all as specified and directed.

Add for each additional 50 m or part thereof beyond 50 m and upto a total distance of 250 m, complete all as specified and directed.

Removing excavated materials exc. 250m but n exc 500 m and depositing where directed at a level n'exc. 1.5 m above the starting point, complete all as specified and directed.

M&L for PCC 1:4:8 type -D2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

M&L fly ash bricks, old size as per IS 1489 (Part I)-2002 buit in CM 1:6 straight or curved on plan exc. 6 M mean radius complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through, kerb stone and the like including weathering slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement mixed with WPC @ 3% of weight of cement, complete all as specified and directed. (Note: WPC shall be measured & paid for separately)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 mixed with WPC @ 3% of weight of cement, complete all as specified and directed. (Note: WPC shall be measured & paid for separately)

Supply only integral water proofing compound powder conforming to ISI specification, complete all as specified and directed.

M&L for preparing of plastered or unplastered new surfaces of walls and applying two coats cement base paint over one coat of cement base primer complete all as specified and directed.

M&L for Mild steel work as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Note:- Each line wire to be measured)

M & L for applying two coats of synthetic enamel paints over a coat primer including preparation of new concrete/brick surfaces over 10cm girth or width, not otherwise described, complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

Surface excavation averaging 15 cm deep and not exc 30 deep and getting out in soft soil, complete all as specified and directed.

Hardcore of gauge n exc. 63 mm, of broken stone/boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M & L for 100mm thick plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate), complete all as specified and directed.

M & L for 75mm thick plain cement concrete type B- 2, 1:2:4 (40mm graded aggregate), complete all as specified and directed.

M & L for Forming Construction joint 75mm deep x 10mm wide filled with sealing compound and sealed with sealing compound, Grade 'B' , complete all as specified and directed.

M & L for Providing and laying 60mm thick factory (rubber mould) made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm average thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for cutting the undergrowth trees/shurubs including removal of roots and branches any type / shape / thick, and removal all debris outside the MOD land and make the surrounding clear for working complete all as specified and directed.

M & L for Forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound, Grade 'B' , complete all as specified and directed.

M/S SWATI CONSTRUCTION

disha construction

M/S SHIVA CONSTRUCTION

M K Engineers and Contractors

NEW BHARAT ENGINEERING AND CONSTRUCTION CO

LOKESH CONSTRUCTION

RAJEEV ENTERPRISES

M R CONSTRUCTION

Spectrum Enterprises

M/S S S A ASSOCIATES

AJANTA ENGINEERS