PROVN OF 03 X WASHING POINTS IN BLDG NO P 15 P 16 and P 17 AT OTM ACCN OF DINNING HALL OF MED REGT AND CERTAIN OTHER SANCTIONED WORK AT FARIDKOT MIL STN

Amount

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, laying cables/poles foundation / stay assembly etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/ loose soil including baling/ pumping /dewatering (if required) incl removal up to 50m of water complete all as specified and directed by Engr-in-Charge

Excavating in post holes (or similar holes) n.exc 0.5 Cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm deep in any type of soil complete all as specified and directed

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M&L for plain cement concrete type C2 1:3:6 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete all as specified and directed by Engr-in-Charge

M&L for 40mm PCC 1:2:4 type B1 (using 20mm graded aggregate) as in floor finish complete all as specified and directed by Engr-in-Charge

M&L for old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified

M&L for RCC (1:1½:3) type A1 using (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m , lintel bend complete all as specified and directed

M&L for RCC 1:1½:3 type A1 (using 20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Form work to sides and soffits of floor or roof beam, beam, hauchings, girders, bressumemers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams, flat, rough finished surfaces of concrete complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surfaces of concrete complete all as specified and directed

Formwork to sides of pillars, posts, struts, piers, column and stanchions, Square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed

S&F MS TMT Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel bars 6mm to 8mm dia TMT Bars , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for 100mm thick PCC 1:4:8 type D-2 (Using 40 mm graded aggregate), as in flooring, sub base etc complete all as specified and directed.

M&L for 100mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregates as in sub base flooring complete all as specified

M&L for PCC 1:4:8 type D2 as in sub base, 75mm thick (using 40 mm graded stone aggregate) complete all as specified

M&L for 25mm thick PCC 1:2:4 type B-0 (Using 12.5 mm graded aggregate), as in flooring complete all as specified and directed.

M&L for Brickwork with fly ash brick, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 etc. complete all as specified and directed.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- Charge

S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified. (Highlighter shall be provided as directed by Engr-in-Charge)

M&L for colured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L for mild steel framed work of Fe-290 (Gde E-165) as in grills/guard bars shouldered with steel windows/ventilators frames. Cooler stand, ladder etc including red oxide primer coat complete all as specified

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified and directed by Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed.

S&F 100 mm long SS butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed

S&F 150 mm long Aluminium handles cast type anodised complete all as specified and directed

S&F 125 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasps staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

M&L for preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Rendering 10 mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in cement mortar 1:6 on other than face of Brick walls or stone surfaces, finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge

M&L for rendering 10mm thick in cement plaster 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15 mm thick in cement plaster 1:4 on surface other than fair face of brickwork or stone masonry surfaces or on one side of lathing, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick walls or concrete surfaces, finished even and smooth without using extra cement including mixing of liquid WPC in mortar@ as per manufacturer instruction per bag of cement of 50kg, complete all as specified and as directed. NOTE: WPC will be measured and paid separately

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered or unplastered surfaces of wall applying three coat of White Wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered or unplastered ceiling surfaces and applying two coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 50mm thick type C-2, 1:3:6 using 20mm graded aggregate as in plinth protection/path finishing surfaces even and fair (without using extra cement) complete all as specified and directed

Supplying and laying of CPVC pipes ISI SDR 11 pipe 20mm dia with all fittings solvent and fixed to wall and Ceiling/ Concealed or laid in floor, bore of pipe 20mm including all fitting (Brass/CPVC) complete all as specified and directed by Engr-in-Charge.

Supplying and laying of 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge.

S&F of 15/20 mm inner dia CPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified

S&F of 15/20 mm inner dia CPVC Brass Elbow fittings complete all as specified

S&F of 15/20 mm inner dia CPVC Brass Tee fittings complete all as specified

S&F of 15/20 mm inner dia CPVC Brass Tank Adapter fittings complete all as specified

S&F 20mm Gun-metal, globe or gate valves/ UPVC valve with , screwed both ends for pipe and fixed complete all as specified and directed

S&F 15mm fancy type chromium plated Angle valve/stop valve, screwed down high pressure, with crutch or butterfly handle scresed both ends for iron pipe or for unions and fixed complete all as specified.

S&F 15mm bore stop valve chromium plated ,screwed down high pressure with screwed both ends for GI out let/ inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by Engr-in-Charge

S&F 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge

S&F in 15mm bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F 15mm fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, PVC 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed

S&F in Vitreous china wash down water closet pan (pedestal pattern), white including PVC 'P' or 'S' trap, Cover and fixing bolts, complete all as specified and directed.

S&F 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, including water coupling of PTM suitable for urinals (inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed

S&F in brass chromium plated overhead shower 125mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed by Engineer in Charge.

S&F in 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including fixing clamps with nut and bolts including taking down existing pipe complete all as specified by Engineer-in-Charge.

S&F in 110mm bore PVC (SWR) bends with or without shoe / with or without access door any radius fixed to walls including distance pieces and fixed with shaddle complete all as specified by Engineer-in-Charge.

S&F in 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to floor including fixing clamps with nut and bolts including taking down existing pipe complete all as specified by Engineer-in-Charge.

S&F in 75mm bore PVC (SWR) bends with or without shoe / with or without access door any radius fixed to walls including distance pieces and fixed with shaddle complete all as specified by Engineer-in-Charge.

M&L for PVC (SWR) Floor trap long neck 75 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc fixed in repairs complete all as specified and directed.

M&L for PVC (SWR) floor trap 110 mm bore plain with grating including jointing with solvent cement fixed to wall/laid in trenches etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm PVC (SWR) vent cowls complete all as specified and directed.

S&F Rotational moulded polythylene 1000 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float complete all as specified

S&F Reinforced concrete pipes class NP-2 laid, jointed and tested complete with collar of size 150mm (internal dia) in foul condition all as specified and directed by Engineer-in-Charge.

M&L for 150mm bore Concrete bed (PCC 1:3:6 type C2) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L for Roof Treatment as specified below and as directed : (a) Cleaning, washing of surface and removing all existing bitumen coatings/ APP membrane completely with intense wire brushing or high speed water jet. Surface should be free from any loose paint, dust or grease. (b) Rendering 10 mm thick in cement plaster 1:4 with WPC on roof, fair faces of brick work or concrete surfaces all as specified (c) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars. (d) Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water) (e) Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls. (f) Applying three coat of HydroShield PUD microfibre reinforced UV resistant polyurethane (solid content 68% ) / Damp Proof ultra UV Stable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured (Elongation 400% ± 50, Solid Contents > 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush/ roller upto 300 mm on walls. (g) The complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Make : DrFixit/ Asian/STP Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment .

M&L for plain cement concrete type B1, 1:3:6 (using 20mm graded stone aggregate) as in bed plates to vertical steel posts, etc including necessary form work complete all as specified and directed

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/ chowkhat and fixing of bed block of hold fast etc complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping, benching of manholes, including necessary formwork, weathering, slightly rounded or chamfered angles complete all as specified and directed

M&L for RCC M-30 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC M-30 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts and beams complete all as specified and directed

M&L for RCC M-30 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for RCC M-30 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified

M&L for Hard core of broken stone aggregate gauge not exc. 63mm deposited spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified

M&L for Hardcore of broken stone or boulder of gauge exc 63 mm but n.exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified

M&L for sand filling under floor or foundation including watering and consolidation complete all as specified

M&L for machine pressed precast concrete interlocking paver block (coloured with glossy finish) with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed

S&F coloured Machine pressed precast cement concrete interlocking paver blocks any shape and size conforming to IS-15658 -2006 of 80 mm thick M-40 grade with grey cement and pigment all as specified and directed

M&L for (Fe 410W grade E-250 quality A) MS roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (post col ,Beam, tee, angle, channel, rectangular tubular Section or flat sections) including distance pieces, cleats etc. complete all as specified and directed

S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Mild steel work in tubular post/trusses/purlins including special shaped washers etc., complete using but welded. confirming to IS 4923 : 1997 with one shop coat of zinc chromate primer paint complete all as specified and directed by Engr-in-Charge

S&F rolled mild steel plates (plain or chequred) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410-O or Fe 310-O complete all as specified and directed

Surface excavation, not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed by Engr-in-Charge

S&F precast kerb stones (factory made) in PCC 1:2 :4 type B-1 incl chamfers, weatherings, throatings etc in smooth finish & set in cement mortar 1:4 on sides of roads including necessary excavation embedding blocks in the ground to depth complete all as specified and directed

M&L for preparation of newly plastered surfaces of concrete and applying two coat of synthetic enamel paint complete all as specified and directed

M&L for Granite (of any type) work 15 to 17 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted with a wall care putty finished surface complete all as specified and directed by Engr-in-Charge

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge

M&L for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including full width beading all around fixed with glue & nail complete all as specified and directed

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed by Engineer-in-Charge

S&F sheet glass of 3mm, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane, complete all as specified

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F making kerbs with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified

M&L for 40 mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete(1:2:4), typeB-0, including mixing of liquid WPC in mortar@ as per manufacturer instruction per bag of cement of 50kg, complete all as specified and directed NOTE: WPC will be measured and paid separately

Supply only liquid water proofing compound all as specified

M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over chalk whitening complete all as specified & directed by Engr-in-Charge

M&L for Machine cut kota stone slab as in flooring of 20-25 mm thick, set and jointed in cement slurry over & including screed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified & directed by Engr-in-Charge

M&L for Machine cut kota stone slab 15-20 mm thick as in skirting, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified & directed by Engr-in-Charge

S&F rolled hollow mild steel square section in Joist, channel, angle, or tee sections, fixed independently, without connecting plates including connections, bending and welding as necessary complete all as specified & directed by Engr-in-Charge

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) junction single, 110 mm (Single T) equal or unequal complete all as specified and directed by Engr-in-Charge

S&F 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

S&F PVC connections 15mm size with PTMT nuts of length 300mm Fixed complete all as specified and directed by Engineer-in-Charge

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed by Engineer-in-Charge

M&L for RCC type B0 1:2:4 Nominal mix using 12.5 mm graded crushed stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge

M&L for baroda green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr-in-Charge

M&L for Cutting into existing manholes for connecting new drains of internal dia 100 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engr-in-Charge

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed NOTE:- Serviceable materials to be transported by contractor to MES store without any extra cost.

Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed in wall/roof/ceiling surface in existing PVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, junction boxes, 2mm thick galvanised steel pressed modular boxes of suitable sizes for mounting of modular switches, sockets, fan regulator etc covered with modular cover plate of required size fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including foxing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for One light point/Fan point/Exhaust point controlled by one way switch all as specified and as directed

All as per Srl Item No. 128 here-in-before but one three pin socket out let 5 amps on the same board with other switches

All as per Srl Item No. 128 here-in-before but One 3 pin, 5A switch socket outlet point on independent board

All as per Srl Item No. 128 here-in-before but with 2.5 sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor.

S&F LED tube light fiting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charger

S&F LED tube light fitting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge

M&L for ceiling rose 3 terminal / PVC / polycarbonate isolated body complete all as specified and directed

S&F Modular switch 1 way 6 amps one module switch all as specified and directed

S&F Modular socket 6A 2/3 pin, 2 module socket all as specified and directed

S&F Modular switch 1 way 16 amps 1 module switch all as specified and directed

S&F Modular socket 6A / 16A - 2/3 pin, 2 module all as specified and directed

S&F exhaust fan steel body, AC single phase 230 volts AC supply, 300mm sweep with bird guard, four blades with louvre, all fixing arrangements like wall hole, material etc. all as specified and directed by Engineer-in-Charge

Supplying, fixing and commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostat, NRV, connection piece PVC connection for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 no Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed

S&F sheet metal enclosure for DB's SPN 230 volts 8 way double door with 200 amps rated bus bar complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB complete with connection testing and commissioning all as specified and directed

S&F LED building security light 25 watt luminaries comprising of epoxy powder coated housing, enclosed with glass cover including 40mm GI Bracket and fixing arrangement in road light, security light etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable 1.5 sqmm with suitable size and including taking down defective unserviceable street light any size as per specification & as directed by Engr-in-Charge

M&L for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel & wiremesh, PCC chamber in cement concrete (1:2:4) type B1 including 40mm thick pre-cast RCC (1:2:4) type B0 cover and 40x40x6mm angle iron frame on top of pit cover and excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed. Notes :- (i) GI wire upto earth test point/ equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1 metre away from the outer edge of PCC chamber. (iii) Minimum weight of reinforcement shall be 1 Kg for each earth pit cover

Supply and laying steel water Tubing, 50 mm dia ISI Marked, '“light grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified and directed

Supply and laying steel water Tubing, 25 mm (1”) dia ISI Marked, '“Medium grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified

Supply and laying steel water Tubing, 20 mm (1”) dia ISI Marked, '“Medium grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified

M&L for Gun-metal, globe or gate valves, 25 mm bore of pipe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed. Note: Earth work, Sand cushioning, GI pipe and cable cover for protection to be measured and paid separately

Supply and laying double wall corrugated pipe (DWCP) size of 50/38 , Non-metallic, resistance to compression typo 450, resistance to impact, normal, resistance to bending pliable resistance to external influence; ingress protection: IP 67, resistance against corrosion: without protection, resistance to flame propagation, non-flame propagating conforming to IS-16205 (part-24) 2017 including necessary jointing material le snap fit coupler with rubber ring, sealing plug, tees, bend, angel bend etc for passing electrical cable complete all as specified and directed by Engr-in-Charge

Supply and laying steel water Tubbing, 25 mm dia ISI Marked, '“light grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified and directed

S&F ceiling fans complete with blades, down rods, Remote and accessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

RAJINDRA AIR CONDITINOR FABRICATORS (BID ID -3481994)

V R TRADERS (BID ID -3487638)