providing 6 fee high GI interlocked fencing around Domestic Farm Unit for the Department of Family Resource Management College of Home Science at CCSHAU Hisar

Amount

Earth work in excavation in foundations, trenches, etc .in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches ,stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres (HSR 6.6)

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m (a) soft/loose soil {HSR 6.25(a)}

Extra for smooth exposed concrete finish as desired which is not to be touched or plastered but is to be left as it comes out of the shuttering for precast RCC battens (RCC posts for fencing). {HSR 9.14}(45% of labour rate)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth {HSR 10.41}

Extra over item no.10.1 to 10.61 above when work is done in situ in small quantities not exceeding 0.30 cum per block in situ such as staggered blocks, arrows, concrete blocks over inverted filters, bed plates, arches, etc. {HSR 10.62}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns,(square or rectangular) battens and lintels etc., excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects. {HSR 10.86)

Extra over item Nos. 10.79 to 10.94 , if 1:1.5:3 mix is used, instead of 1:2:4 {HSR 10.95(a)}

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in :- {HSR 18.1} (b)M.S. Flats

Supplying M.S. Bolts of required sizes with nuts and washers complete {HSR 18.15(a)}

Fe-500 D TMT steel bars for R.C.C., works, where not included in the complete rate of R.C.C. , including bending ,binding and placing in position complete (HSR 18.22)

Providing and fixing 0’-4” long M.S. pipe of ¾” dia (middle class) embedded in RCC posts, complete in all respects as per architectural drawing and design (NS)

Providing and fixing 0’-4” long PVC pipe of 15 mm dia embedded in RCC posts, complete in all respects as per architectural drawing and design (NS)

Providing and fixing 8 gauge G.I. wire for making rings for reinforced concrete posts including bending, binding and placing in position, complete (NS)

Removing /dismantling of existing angle iron/RCC posts including cement concrete block and placing them in store/one point carefully, complete in all respects, as directed by Engineer-in-Charge (NS)

Removing of existing old barbed wire fencing including making its rolls and shifting the same to store , complete in all respect as directed by Engineering In charge (NS)

Providing and fixing 8 gauge G.I. wire at the top of interlocked fencing including binding with fencing posts by means of 16 gauge GI wire (GI wire used for binding shall not be measured for payment), for strengthening, complete in all respect (NS)

Providing 0'-6" long GI nut & bolt of 10 mm dia or of any other size fixed in position, complete (NS)

Providing and fixing GI interlocked fencing of size 3"x3" made of 10 gauge wire fixed with RCC post by means of MS flat & GI bolts/nuts (item of MS flat shall be paid separately under HSR items and item of supply of GI bolts/nuts shall also be paid separately as NS item) including cutting, drilling holes in flats etc., complete in all respects as directed by Engineer In charge.. (NS)