8165/GE/SMB/T-76/2025-26 SPL REPAIRS TO BLDG NO T-113 AT BHIM LINES AND SEMI UNDERGROUND RESERVE SUMP P 204 IN AMN POINT AND PROVN OF TOILET CUM BATHROOM NEAR BLDG NO T 128 AT BHIM LINES AT MIL STN SAMBA

Amount

Disconnecting of existing water tanks exc. 250 Ltrs but not exc 500 Ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position incl cleaning and removing all scale and dirt etc

Dismantling of Bricks (laid flat or on edge) or brick tiles/cemented tiles in floors,roof,terrace, channels,kerbs, aprons, etc. (each layer) laid bedded and pointed in any mortar complete all as specifred and as directed.

Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster/demolition of cement concrete any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specifred and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof including mixing of water proofing compound as per manuacture instruction finished and laid to required slope complete all as specified and as directed. (WPC shall be measured and paid separately)

M&L Rendering 15mm thck in CM 1:4 on Concrete surfaces of roof finished fair & even and including mixing of water proofing compound (WPC shall be measured and paid separately)

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application incl Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed .

S&F Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified

Taking down GI pipe 15mm bore steel tubing and connections including cleaning for refixing or removal to store ,complete all as specified and directed by by Engr-in-charge.

Taking down GI pipe 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed

S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors ,complele all as specified and directed by by Engr-in-charge.

S&F G.I. pipe 20mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors,complete all as specified and directed by by Engr-in-charge.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 15 mm bore pipe, including making connections complete all as specified and fixed.

M&L for Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles ,complete all as specified and directed by by Engr-in-charge.

M&L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 ,complete all as specified and directed by by Engr-in-charge.

All as per srl item No 15 above but except bricks ,complete all as specified and directed by by Engr-in-charge.

M&L for Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.,complete all as specified and directed by by Engr-in-charge.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces rendering to be finished even and smooth without using extra cement ,complete all as specified and directed by by Engr-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer including applying base of putty for smoothening of surfaces etc ,complete all as specified and directed by by Engr-in-charge.

M&L for Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer including applying base of putty for smoothening of surfaces etc,complete all as specified and directed by by Engr-in-charge.

M&L for Rendering 10+5 mm thick on fair faces of brick or concrete surface walls in two layers, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) including water proofing compound i 2nd layer (supply of WPC paid seprately) complete all as specified and as directed by Engineer-in-charge.

supply only Liquid water proofing ,complete all as specified and directed by by Engr-in-charge.

M&L for Applying two coats of cement base paint including prepration of new plastered surfaces of wall complete all ,complete all as specified and directed by by Engr-in-charge.

M&L for Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 2nd storey with necessary scaffolding ,complete all as specified and directed by by Engr-in-charge.

M&L for Rendering 5 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement including Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed by Engineer-in-charge.

Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.

Preparation of old decorated brick /concrete, plastered /un-plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying two coat of white wash on ceiling, complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all as specified and directed by by Engr-in-charge.

M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified & directed.

M&L for Glazed coloured ceramic tiles joint free in vertical surfaces of size 300 x 450 mm x 7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3 on brick /concrete surfaces ,complete all as specified and directed by by Engr-in-charge.

M&L for non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, ,complete all as specified and directed by by Engr-in-charge.

Description all as item No 31 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.

M& L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marbles complete all as specified & directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), all as specified and directed by Engineer-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt).

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section (60x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section with 10mm squar guard bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-354/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge.

S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., ,complete all as specified and directed by by Engr-in-charge.

M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer ,complete all as specified and directed by by Engr-in-charge.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or grith and applying one coats of synthetic enamel paint all as specified.

S&F Factory made 35mm thick, IInd class H.W rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ,complete all as specified and directed by by Engr-in-charge.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ,complete all as specified and directed by by Engr-in-charge.

S&F 35 mm thick 1st class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters ,complete all as specified and directed by by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge

S&F butt hinges of mild steel cold rolled medium weight of size 100mm ,complete all as specified and directed by by Engr-in-charge.

S&F in repair mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work ,complete all as specified and directed by by Engr-in-charge.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

M&L for Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engr-in-Charge.

S&F for Harrison rails, mild steel, anodised aluminium alloy with fixing brackets, stops, rollers etc. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings),complete all as specified and directed by by Engr-in-charge.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint ,complete all as specified and directed by by Engr-in-charge.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ,complete all as specified and directed by by Engr-in-charge.

S&F Sheet glass, ordinary quality 2.5 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pane ,complete all as specified and directed by by Engr-in-charge.

All as per item no 53 but fixing as in repair incl hacking out old glassess from metal frame ,complete all as specified and directed by by Engr-in-charge.

S&F Aluminium alloy, anodised sliding door bolts(300mm long) with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed ,complete all as specified and directed by by Engr-in-charge.

S&F Aluminium handle 150 mm long cast type anodised, ,complete all as specified and directed by by Engr-in-charge.

S&F Aluminium tower bolt (200 mm long), anodised barrel tower bolts of extruded section ,complete all as specified and directed by by Engr-in-charge.

S&F M.S. rat tail helical door spring (150 mm long) including roller and roller plate ,complete all as specified and directed by by Engr-in-charge.

Taking down door shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same after easing and adjusting/resizing ,complete all as specified and directed by by Engr-in-charge.

S&F in Repair Vitreous china WHB size 550x400mm including cutting or pinning in ends of brackets or erecting stands incl 32mm dia waste pipe,waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repair C.P. Bib taps(Fancy type) 15mm bore cast copper alloy with crutch or butter fly handle,screwed down,screwed for iron pipe or brass ferrule ,complete all as specified and directed by by Engr-in-charge.

S&F in repair C.P. Angle valve/stop valve (fancy type) 15mm bore,cast copper alloy screwed down,high pressure,screwed both ends for iron pipe or unions ,complete all as specified and directed by by Engr-in-charge.

S&F in repair C.P. pillar tap( fancy type 15mm bore)cast copper alloy with capsten head screwed down high pressure with or without letter 'Hot' or 'Cold' with long screw shank and flt nuts screwed for iron pipe ,complete all as specified and directed by by Engr-in-charge.

S&F in repairs tubular towel rail,brass chromium plated, 60cm long between flanges complete all as specified and directed

S&F in repair PVC connection 15mm size, 450mm long with PTMT nut ,complete all as specified and directed by by Engr-in-charge.

S&F in repair 10 litres Capacity PVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing only in repairs of High or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any ,complete all as specified and directed by by Engr-in-charge.

S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc.,complete all as specified and directed by by Engr-in-charge.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste coupling,washers waste pipe, cast iron cantilever brackets ,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm ,complete all as specified and directed by by Engr-in-charge.

M& L cement concrete as in sunken floor ,mass concrete type C-2 1:3:6 40 m graded stone aggregate including demolition of existing concrete in sunken floor of any description and in any position complete all as specified and directed by by Engr-in-charge.

M&L cement concrete 25mm type B-0 ,1:2:4 using 12.5 mm graded aggregate as in base / levelling course including demolition of existing PCC of any description complete all as specified and directed by by Engr-in-charge.

M&L Rendering 15 mm thick on fair faces of brick or concrete surface walls in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L Providing, cement concrete1:2:4 Type B-1(using (20 mm graded ggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, ,complete all as specified and directed by by Engr-in-charge.

S&F in repair Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union ,complete all as specified and directed by by Engr-in-charge.

S&F in repair 15mm bore stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,,complete all as specified and directed by by Engr-in-charge.

S&F UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.

S&F UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.

S&F, UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F, UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

S&F, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

S&F, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) , reducers 110 mm dia complete all as specified.

S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified.

S&F in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,Including Demolition of reinforced cement concrete of any discription ground to 2nd floors and removing the rubbish from the work site out side defence premises complete all as specified.

M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, ,complete all as specified and directed by by Engr-in-charge.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete,complete all as specified and directed by by Engr-in-charge.

M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n exc. 10cm wide for fair finished surfaces of concrete,,complete all as specified and directed by by Engr-in-charge.

Machine cut kota stone slab flooring 20-25mm thick including Screed bed (1:4) or bedding layer of mortar 20 mm thick for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified & directed

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item No. 86 ,complete all as specified and directed by by Engr-in-charge.

M&L for 50 mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), ,complete all as specified and directed by by Engr-in-charge.

M&L for PCC 1:3:6 type C-2(using 40 mm graded cr. stone aggr)as in surface channels and drains including Demolition of cement concrete of any descriptions any position specifically provided for complete all as specified . completee all as specified.complete all as specified.complete all as specified and as directed.

Chequered Coloured cement concrete tiles 30cm x30cm x25mm thick, , set, with grey cement and pigment , jointed and pointed in neat cement slurry in floors over and incl 15 mm thick screed bed in CM 1:4, including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc.complete all as spd & dir.

M&L for cleaning of concrete surface with jet water spray and making holes by using electric drill machine, providing and fixing PVC packer having 20 Cm C/C in 14mm dia holes, grouted with PMC slurry using polymer injection method with small grout pump and tipping of packer with plug leak.

M&L for applying a repair coat on concrete surfaces with cement and polymer mixer in ratio (1:1) and appling a priming coat of polymer and cement mixer in ratio (1 : 1.5) over repair coat, on priming coat a layer of fibre mesh more than 150 (GSM) will be provided, and on the fibre mesh, a rubber coat of density of 1.02 kg/ltr will be applied and second layer of rubber coat in perpendicular direction to be applied to ensure durability and effectiveness to retain water. The membrane/final finish must have a dry film of 1.2 to 1.5 mm. Leave the membrane in atmospheric temprature for self curing upto 7 days. applying 20mm thick cement plaster in CM (1:3) mixed with fine chips upto 3mm size @ 4% by weight of cement and repair polymer @ 10% by weight of mortar and curing for 7 days. Note ; The work will be carried out through approved applicator and as directed by Engr-in-Charge.

Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement based paint over a coat of primer, complete all as specified and as directed by Engr-in-charge.

Preparation of new plastered or unplastered surfaces of walls and floor and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level all as specified

M&L for 75mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil.

Removing excavated material (soils) exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point.

Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc all as specified and directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts all as specified and directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m all as specified and directed.

Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floor, roof, landing, balknies, conopies, decks, slab and in shelves and like all as specified and directed.

Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete all as specified and directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and as directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete as per specified

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide.

All as per srl item No. 90 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified.

M&L for 05 mm thick CM 1:4 rendering on fair surfaces of ceiling work and finished even and smooth without using extra cement all as specified

M&L 10mm thick rendering in CM 1: 4 on fair faces of brick work or concrete surfaces for backing coat for tiles all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed.

M&L Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified.

M&L 75 mm thick cement concrete (1:4:8) type D2 as sub base to floor as specified.

M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified.

M&L for Non-skid coloured ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface,complete all as specified and directed.

M & L for hardcore of broken stone or boulders of gauge not exc 63mm and deposited spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface

M&L for 50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specified.

M&L for preparation of new plastered surfaces on walls and applying three coats of white wash.complete all as specified and directed.

S&F for mild steel window (Box type) factory made with side hung shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified. Note : (i) The window shall be fabricated as per Drg CEPZ/TD-354/07 Sh No 1/3 to 3/3 (ii) Glazing, wire gauge shall be measured and paid separately.

S&F for mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified. Note : (i) The window shall be fabricated as per Drg CEPZ/TD-354/07 Sh No 1/3 to 3/3 (ii) Glazing, wire gauge shall be measured and paid separately.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 quality A incl one shop coat of zinc chromate primer paint incl preparation of surfaces at contractor's workshop before fabrication complete all as specified.

S&F 4 mm thick glass sheet of ordinary quality n exc 0.5 Sqm in each pane complete all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm thick plain coloure PVC sheet on back face complete all as specification and drawing.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .

M&L for 10 mm thick rendering in CM 1:3 on roof sufaces, finished even and smooth without using extra cement complete all as specified. Note :- water proofing compound shall be measured and paid seperately under the respective item.

S&F for 20mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified .

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified .

S&F for 500 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cast iron P trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and directed.

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

Supply Only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified.

S&F for Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified.

S&F, 15 mm dia bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified.

S&F Vitreous China wash basin (Pedestal), white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified.

S&F Pillar taps 15mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' and cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.

S&F for chromium plated soap dish and fixed with CP brass screws in wooden /plastic cleat complete all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches or in floor all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches or in floor all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door all as specified.

S&F 75mm bore Cast iron cowls all as specified.

M&L cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified.

S&F stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified.

S&F Vitreous china urinal partition white of size 310 x 700 mm about 40 cm above floor line.

S&F for Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified.

S & F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, connection to drain/ trap (out going pipes ) and to flushing pipe complete all as specified and as directed by engineer in charge .

S & F plastic water closet seat cover (closed pattern) with PVC Hinging device for pedastal pans complete all as specified and as directed by engineer in charge .

S&F Health faucet (ABS Body )mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter ling flexible tube and ABS wall hook including making connections and fixing in position complete all as specified and as directed .

S&F in repair 15mm bore fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement motor 1:4 and finished even and smooth without using extra cement complete all as specified

M&L for cement concrete 1:3:6 type C1 (20mm graded aggregate) as in surface channels and drains including necessary formwork etc all as specified.

200 mm dia reinforced concrete pipes class NP-2 laid and jointed complete with collers.

M&L for cement concrete 1:4:8 type D2 (40mm graded aggregate) in bed to 200mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete all as specified.

Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab set in CM (1:6) etc all as specified and directed by Engr-in-charge.

Soakage well of size 1.80 x 3.00 Mtrs effective depth, excavation in ordinary soil , PCC (1:3:6) as in fdn, brick work in honey combing and solid in brick work in CM (1:4) and top of RCC M-25, RCC cover slab, and filling with brick bats, RCC slab covers, etc. complete as shown in drg No. CEPZ/C-TD-013/13 sheet No 1/5 and 5/5 dated 11-09-2013 and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lampholders brackets,bulk head fitting,tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc all as specified and directed by Engr In Charge

M&L for point wiring using FRLS PVC insulated unsheathed /multistranded copper conductor cable 1.5 sq mm drawn through and including pvc conduit marked and of appropriate size as specified, fixed in conceeled of wall/ceiling with mild steel sunken box and bakelite sheet 3 mm thick including all fittings such as tees, bend and junction boxes etc complete for following:- Make of Cable :-Havells/Polycab or equivalent Make of Conduit:-As per IS

One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing)

All as per Srl Item No 170.00 above but for call bell point complete all as specified and directed.

One 5 Amp socket outlet on independent board.

One 5 Amp socket outlet on same board.

All as per Item Srl No 170.00 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing).

S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F in replacement SPN 40 to 63 Amp, type 'C'10KA, 240 Volts.

S&F in replacement MCB SP 5 to 32 Amp, 'C'10KA, 240 Volts.

S&F Switch piano, flush type 5 Amp, One Way.

Supply and fix bell push flush type with indicator 6 Amps complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin 5 Amp.

S&F Switch piano, flush type 15 Amp, .

S&F socket out let 2 in 1, 5 & 15 Amp flush type.

S&F ceiling rose 3 terminal size 50*65 mm surface type.

S&F Electronic fan regulator flush mounting step type 300-400 watts complete.

Supply and fixing electronic bell ding-dong AC 230 Volts single pole complete all as specified and directed.

S&F LED Lights fitting 1x18 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & Replacement for angular type Lamp holder PVC policarbonate type with back plate including Lamp 7Watt complete all as specified '

Earthing complete with galvanised earth plate electrode 60 cmx 60 cmx 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5M belownormal GL connected to GI wire 4mm as earthing lead by means of nut,bolts and check nut and washer,GI light grade protection pipe 15 mm dia. upto 7.5 m,GI watering pipe 20 mm dia,RCC cover with funnel,excavation in any type of soil,PCC pit charcoal ,salt all as shown in electrical plate No 5 of SSR Part I, including earth test point up to pannel board,all as specified or indicated including testing on completion.

Supply & FIX EXHAST FAN made of sturdy engineering plastic complete with lovers shutter,voltage 230v,50 HZ, RPM 1200,COPPER WINDING OF SWEEP 300MM .Havells/philips/Bajaj/USHA/KHATAN

S& F LED Street light fitting 35 watt 230 v AC out door type with high pressure die complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete,including bracket.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as spd and directed.

Sand cushioning to under ground cable using fine sand (8 cm before & 15 cm after laying of cable) complete all as specified.

M & L for sand cushioning for cables all as specified in 19.75 of SSR Part-I.

Returning filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick in any type soil complete all as spd and directed.

Material and labour for sub class B brick old size covering laid dry ,flat transversely along the length of cable on sand cushioning with width eqal to the length of the brick complete.

Supply, fixing & laying GI pipe light grade 50mm bore in trench, under floor, wall and on pole for cable protection.

S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 16 KA=01 NO (for incoming ) (b) MCB SP 63 amps = 04 Nos (for outgoings) . ( Note :- (i)The DB shall be VTPN series. (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .

M & L for submain wiring with copper conductor PVC insulated FRLS of size 2 x 10 sqmm alongwith earth wire of size 1 x 10sqmm on wall surface with and including PVC casing caping of suitable size complete all as specified and as directed by Engr in Charge.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fixing including taking out and removing old unserviceable XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 3.5 core in trenches, through pipe, under culvert or in air complete all as directed including using existing cable cushioning and cable protection complete as directed.

Supply and laying 1100 volts grade PVC insulated heavy duty armoured multistranded aluminium conductor cable of size 6 sqmm 2.0 core in trenches, through pipe, under culvert or in air complete all as specified and directed. Note :- Earthing work, Sand cushioning and Brick shall be measured and paid separately.

Taking up CI water mains (including all fittings) with spigot and socket ends and connection for 250mm dia sizes :- Note : Excavation work will be paid separately in respective item.

M & L for cast iron pipes with flanged ends, centrifugally cast class A, in any length laid in trenches, all as sps and as directed.

Exavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep soft/loose soil getting out for laying of pipe CI/GI etc of any size.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25cm all as specified and directed.

CI special fittings as per IS for spigot and socketed pipes for water mains/ branches lines such as bends (any type radius and angle) tapers and type (straight, bend, increasing, decreasing, or double socket etc) tee pieces, single branch, Y junction, double branch, cross (all socket, socket and spigot) collers, caps & plugs, including connecting pieces one end flanged and other socket or spigot and bell mouth pieces suitable for run lead joint, run lead up to 150mm bore complete all as specified and directed.

Construction of brick masonary valve chamber of internal dimensions 1200 x 1200 x 1200 mm, bottom floor of the pit shall be constructed in PCC (1:3:6) 15 cm thick with 20 mm stone aggregate, inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 mm thick. The top cover of the pit shall be made out of MS Sheet min 3 mm thick with angle iron frame made out of MS angle 40 mm x 40 mm x 6 mm with 02 nos steel hinges and locking arrangements duly painted with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed.

Cutting existing GI/CI water main pipe line 250mm bore of pipe in position for making branch connection (insertion of GI/Cast iron Tee) including excavation and earth work complete all as specified and directed. Note : Cast iron fittings such as Tee, bends, collar, reducer etc joint and jointing material for fixing of cast iron fittings shall be measured and paid separately.

Cast iron sluice valve with both end flanged with iron wheel handle for clockwise closing brass spindle heavy duty PN-1.6 class conforming to IS-14846/2000 including gaskit joint nuts, bolts & washers all as requirement of site incl dismantling and taking out existing unserviceable sluice valves for 250 mm bore complete all as specified and directed.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

M/S RAJESH SHARMA & CO. (BID ID -3494211)