Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bid | |
| 2 | L2₹38.8 L+₹1.4 L (3.72%)Rejected-AOC KALIBARI BAZAR TUPKHANA PART I PO ARUNACHAL P S SILCHAR DISTT CACHAR ASSAM 788 025 | SILCHAR | CACHAR | ASSAM | 788025 | L2 | Rejected-AOC Being higher than L1 Bid | |
| 3 | L2₹38.8 L+₹1.4 L (3.72%)Rejected-AOC | L2 | Rejected-AOC Being higher than L1 Bid | |
| 4 | L3₹39.3 L+₹1.9 L (5.01%)Rejected-AOC | L3 | Rejected-AOC Being higher than L1 Bid | |
| 5 | L4₹40.7 L+₹3.3 L (8.69%)Rejected-AOC | L4 | Rejected-AOC Being higher than L1 Bid |
Tender Value
₹36.3 L
EMD Value
₹72,500
Closing Date
31 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SILCHAR
GE SILCHAR, PO- ARUNACHAL, DIST CACHAR, ASSAM- 788025
PROVN OF WATER BOWSER POINT AND GARRAGE INCL CERTAIN CER OTHER SANCTIONED AT CIJW SCHOOL VAIRENGTE UNDER GE SILCHAR
2022_MES_554461_2
8737/E8
Open Tender
Civil Works
Item Rate
270 days
VAIRENGTE
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE SILCHAR
₹72,500
Yes
9 Nov 2022
14 Oct 2022
1 Nov 2022
14 Oct 2022
31 Oct 2022
20 Oct 2022
60 days
Amount
PART-I (B/R WORKS) Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, exc 1.5 m deep but n exc 3 m deep and getting out in soft/loose soil complete all as specified and directed.
M & L for Loose filling with aggregates of gauge 40 to 80 mm in back side of weep holes complete all as specified and directed.
Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed.
Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed.
Removing excavated material to a distance exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed.
Removing excavated material to a distance exc. 05 km but n exc. 15 km and depositing where directed complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, as in soft/loose soil complete all as specified & directed
Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified & directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Material and labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.
M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in alternate panels and joints filled with bituminous mastic filling in 1 part of bitumen and 3 part of sand complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified & directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed.
M&L Plain cement concrete 1:2:4 type B-0, (using 12.5 mm graded stone aggregate) as in bed blocks, holdfast blocks, coping, lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching and similar work including necessary form work complete all as specified and directed.
M&L Plain cement concrete 1:2:4 type B-0, (using 12.5 mm graded stone aggregate) as in benching / haunching to manhole rounded or chamferred edges complete all as specified and directed.
M&L Providing precast cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces including necessary form work complete all as specified and directed.
Material and labour for formwork to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete, complete all as specified and directed.
Material and labour for formwork to sides of Columns, pillars, piers, posts and struts for rough finished flat surfaces of concrete , complete all as specified and directed.
Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete , complete all as specified and directed.
Material and labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished flat surface of concrete, complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.
All as per item No. 27 above but 6mm to 8 mm dia complete all as specified and directed
All as per item No.27 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed
M&L for Reinforced cement concrete Design mix (M-25) using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L RCC Design mix (M-25) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L RCC Design mix (M-25) using 20 mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50 mtr span complete all as specified and directed.
M&L RCC Design mix (M-25) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar 1:6 on brick wall or concrete surfaces finished the surfaces even and fair complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar 1:3 on concrete surfaces finished the surfaces even and smooth complete all as specified and directed.
M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] using water proofing compound in 2nd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. Note : WPC shall be measured and paid separately.
Supply only of Integral waterproofing compound complete all as specified & directed.
M&L sand filling under floors or in foundation including watering levelling and consolidation as directed complete all as specified and directed.
M&L precast concrete interlocking paver block coloured pre polished (rubber moulded) any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with proper jointing, pointed with grey cement and pigment complete all as specified and directed.
Material and labour for providing 75 mm thick plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
Material and Labour for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in floor finished even & fair complete all as specified and directed.
Material and Labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'B' complete all as specified and directed.
S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.
M&L for coloured glazed ceramic tiles (300x200) 7mm thick on vertical surface such as skirting, dados, risers etc. set and jointed in neat cement slurry and pointed in coloured cement or pigment to match colour tiles over & incl 10 mm thick screed layer in CM 1:4 complete all as specified and directed.
Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-210 complete all as specified and directed.
S&F Mild steel screw bolt 11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed at the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.50cm and n. exc 30 cm long, complete all as specified and directed.
Supply and fix Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Supply and fix Anodised aluminium door window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified ® complete all as specified and directed.
Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F for Pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Supply and fix 100 mm size stainless steel butt hinges medium weight fixed with stainless steel screws complete all as specified and directed.
S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm extruded aluminium alloy handles cast type anodized complete all as specified and directed.
Supply and fix vitreous china wash basin, white flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed.
Supply and fix in vitreous china wash down water closet pan (pedestal pattern), white with & incl. plastic water closet seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device including fixing bolts and connection to flushing cistern and flush pipe, drain pipe or outgoing pipe, antisyphonage pipe with P or S trap, complete all as specified and directed.
Supply and fix in 10 ltr capacity PVC flushing cistern, valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull, or lever, if any (excluding flush/discharge pipe) complete all as specified and directed.
Supply, lay and fix 15mm bore galvanised iron water tube medium grade with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified and directed.
Supply, lay and fix 20mm bore galvanised iron water tube medium grade with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified and directed.
Supply and fix 15mm Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
Supply and fix 15mm Pillar taps, fancy type, chromium plated, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe fixed complete all as specified and directed.
Supply and fix 15 mm Stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Supply and fix angle stop valve fancy type, cast copper alloy, chromium plated, screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.
Material and labour for Brass chromium plated shower rose 125mm size with long arm complete all as specified & directed
Supply and fix in 15 mm dia 450 mm long PVC connection pipe with two PTMT nuts at each ends with rubber washer complete all as specified and directed.
Supply and fix Waste coupling of PTMT (half or full threaded) minmum weight 45 gms for 32mm dia discharge pipe complete all as specified and directed.
Supply and fix 32 mm dia PVC waste pipe for WHB complete all as specified and directed.
Supply and fix 110 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or laid in floor complete all as specified and directed.
Supply and fix 75 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, fxed to walls fixed with MS clamps of suitable size nuts-bolts complete all as specified and directed.
Supply and fix PVC (SWR) 110 mm bore bends any radius complete all as specified and directed.
Supply and fix PVC (SWR) 75 mm bore bends any radius complete all as specified and directed.
Supply and fix PVC (SWR) vent cowl complete all as specified and directed.
Material and labour for 75mm dia oultlet PVC (SWR) floor trap, plain with chromium plated grating including jointing with solvent cement complete all as specified & directed
Supply and fix Grating doom square of size 150mm of PTMT (Minimum weight 100 gms) . complete all as specified and directed.
Supply and fix soap dish, chromium plated, standard quality fixed to wall with chromium plated brass screws complete all as specified and directed.
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.
Material & labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reformingbenching as required complete all as specified and directed.
Material & labour for 200 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.
Material & labour for PCC 1:3:6 type C-2 concrete bed to 200 mm bore drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Material & labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.complete all as specified and directed.
Supply and fix 2000 Ltr Rotaional moulded polyethylene water storage tank cylindrical vertical with closed top hoisted and fixed in position complete all as specified and directed.
Supply and fix Anodised aluminium snap grid frame work for false ceiling all as specified with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including 4 mm thick pre-painted decorative Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed
M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm in width or girth & applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M & L for preparation of newly plastered surfaces and applying three coats of white wash on surface walls complete all as specified and directed
Material and Labour for applying two coats of acrylic distemper over a coat of primer including preparation of newly plastered surfaces, complete all as specified and directed.
Material and Labour for applying two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces, complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
PART-II (E/M WORKS) M&L for Point wiring using FRLSH PVC insulated unsheathed multi strand 1100 volts copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.
All as per item No. 90 above but for 5 Amps socket Point (Independent board), complete all as specified and directed
S & F switch piano, 5Amp single pole, flush type one way 230 volts complete all as specified and directed.
S & F Socket outlet 2 in 1, 5 pin, 5 Amps flush type complete all as specified and directed.
Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.
Supply and Fix Angular Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with and incl LED lamp/bulb ball type of 10 Watt 3 star complete all as specified and directed.
S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm complete all as specified and directed. Make:- Crompton Greaves Cat No. CCS-100-20-65HL2-DP-NWH or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells
S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED complete all as specfied and directed. Make : Havells Cat Part No. HEXAFIT10WLED857SSYMBOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton
Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :-Crompton Cat aprt No BRISK AIR NEO or equivalent in Havells / Bajaj / Orient
Supply and fix sheet metal enclosure for DB's SPN with 200 Amps rated bus bar 240Volts, 04 way double door etc complete all as specified and directed.
Supply and fix MCB SPN 32 to 40 Amps 240 Volts 'C' series complete all as specified and directed.
Supply and fix MCB SP 5 to 32 Amps 240 Volts 'C' series complete all as specified and directed.
Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.
Supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note:- Thickness of sand cushion after punning down will be measured and paid separately.
Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 10 Sqmm 2 core laid in trenches/fixed to wall/under road/pipe etc with and including copper cable glands & copper thimbles complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm bore GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed.
Material & labour GI tube light grade 40 mm bore for protection of UG cable including dismantling of old unsv pipe complete all as specified and directed.
Supply and fix in GI tube 50 mm dia (ISI Marked) medium grade galvanished with all fittings laid in floors /wall / ceiling etc. complete all as specified and directed.
Supply and fix in GI tube 32 mm dia (ISI Marked) medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and directed.
Material & Labour for Cutting existing DI pipe 150 mm bore & inserting T of size 150 x 50 x 50 mm for making connection complete all as specified and directed. Note : The quoted rates includes for complete earthwork in any ype of soil
Supply, instalation and testing of prefabricated SMC(i.e. Sheet mounding compound) panel clean water tank of size 2 x 3 x 2 mtr (i.e. 12 KL max capacity) conforming IS 14399 (Part-1) top covered with manhole for maintenance having prosperities as low maintenance, excellent thermal and hygienic properties, zero light penetration, stable thermal transition, and hygienic quality make incl Corner iron angle size 75mm x 10mm and MS grillage for foundation and fixing of inlet, outlet pipe and connected accessories complete all as specified and directed.
M & L for staging for mounting water tank of size 2x3x2 m fabricated from cross arm bracing, support, clamps and back plate of structural steel section including nuts, bolts, washers welding cold or hot drilling holes in any shape or size for 3 mtr height above ground level or directed by Engr-in-Charge and incl of two coats of aluminium point over a coat of zinc chrome primper complete all as specified and directed by Engr-in-Charge. Note :- (a) Excavation for foundation shall be measured and paid in respective item of schedule. (b) The PCC work for foundation of 0.6X0.45X0.45 mtrs and copping for 0.2X0.4X0.4 mtrs shall be deemed incl in the quoted rate.
S & F Gun metal globe or gate valves with iron wheel, head, screwed both ends for iron pipe and fixed for 50 mm bore pipe including dismantling unserviceable valve complete all as specified and directed.
S & F Gun metal globe or gate valves with iron wheel, head, screwed both ends for iron pipe and fixed for 32 mm bore pipe including dismantling unserviceable valve complete all as specified and directed.
S & F Gun metal globe or gate valves with iron wheel, head, screwed both ends for iron pipe and fixed for 20 mm bore pipe including dismantling unserviceable valve complete all as specified and directed.
Material and Labour for 50 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified.
Material and Labour for 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified.
M/S SANJIB DEB
SURANA CORPORATION
Younus Khan
M/S TAPAN KUMAR RAY
M/S SUBHAM ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .