Repair to damaged RCC roof with Additional support in wall of main gate no 02 at inside Fy OCFS OCFS.

Amount

Repair to damaged RCC roof with Additional support in wall of main gate no-02 at inside Fy OCFS.

Demolation of reinforced cement concrete in above ground floors and pavings n exc 15 cm thickness.

Dismantling of brickwok built in cement mortar or cement lime mortar.

Formwork to soffits of suspended slabs as flat roof slabs (Horijontal or sloping), fair finished surfaces of concrete.

Reinforced cement concrete type B-1 1:2:4 (20 mm graded aggregate) in slab( flat & Inclined) supported on walls.

M&L M.S. Bars 10 mm dia or over, cut to lenth, bent to shape and binding with M.S. wire as required/directed . (TMT bars).

M&L Mild steel bars 6mm dia to 8mm dia, cut to length,bent to shap required, including cranking,bending and binding with mild steel wire (annealed) not less then 0.9mm dia.(TMT bars).

Chase cutting pinning in brick walls makling good to facings where required and pointing in cement mortor 1:3 to ends or edges of landings cills shelves etc and cutting chases and making good cutting not exc 10 cm girth.

M&L brick work with sub class 'A' bricks straight or curved on plan exc. 6m mean radius built in 1:4 mix cement mortar.

Rendering 12mm thick cement plaster in 1:4 mix cement mortar on walls.

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M&L for brushing neat cement slurry with 3.0kg of cement per sq. metre

Dubbing out average 15mm thick on irregular face of walls ratio 1:4 mix.

Rendering 12mm thick cement plaster in 1:4 mix cement mortar on ceiling.

S/F Anodised aluminium snap grid frame work for false ceiling all as specified.

S/F of 6 mm thick Asbestos cement plain building boards in ceiling fixed to M.S frame with necessary Nut bolts .

S&F of powder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F of powder coating aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S&F glass sheet 4.8 mm ordinary quality and glazing with oil putty in square n.exc. .05 sq.m in each pane etc.

M&L for 10mm thkick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.

S&F of Particle board for insulation purposes, fixed in doors.

Demolation of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L broken stone or boulders hardcore of gauge n.exc.63 mm, deposited, spreaded and levelled in layers n.exc. 15cm thick watered and rammed to a true surface.

M&L cement conerete in foundation, filling and mass concrete Type B2 1:2:4(40mm stone aggregate).

M&L cement conerete in floor Type A1 1:1.5:3(20mm stone aggregate).

M&L for 20mm thick wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner).

M&L for metallic floor hardener

Ereccation & only fixing of plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections

M&L for fixing of plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections. Fe-290 (Gde-E-165).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S/F of joint free white glazed ceramic tiles in Vertical surface 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match.(Make-Somany,Orient,Kajria 1st quality only).

Providing screed bedding layer of mortor 25 mm thick for laying floor finish 1:4 ratio.

S/F of Vitrified Ceramic tiles dark shade/double charged/ultra charged 10 mm thick (square/ rectangular) polished area of each tiles exc 0.42 sqm but not exc 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to match.(Make-Somany,Orient,Kajria 1st quality only).

S&F of 4mm thick PVC sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors

Removing old building materials to a distance of 1.0 km total distance under, beyond the lead included in the rates, including loading, unloading and stacking at the destination

Preparation of old painted surface & apply two coats of Sy. Enamel paint on wood surfaces.(Asian, Berger, Nerolack,Ist Quality).

Preparation of old painted surface & apply one coats of Sy. Enamel paint on steel surfaces.(Asian, Berger, Nerolack,Ist Quality).

Preparation of old painted surface & apply one coats of Aluminum paint on steel(grill) surfaces.(Asian, Berger, Nerolack,Ist Quality).

Complete removal of existing surface of wall Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint(apex) of required shade (Company Depot Tinted) including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.M&L complete.

Prepration of new plastered surface of wall Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint(apex) of required shade (Company Depot Tinted) including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.M&L complete.

EARMARK INFRATECH INDIA PVT. LTD. (BID ID -797370)