90/EUDC-VI/LESA T.G./2023-24

Amount

Safe Loading carriage & unlo-ading of following material from central store to JE Store/work site

ST pole 11/9 mtr

11/0.4 KV 250KVA T/F

LT Cable 1x240//630/ 400 mmsq

Transportation from central store to site 11KV XLPE Cable 3x70 sqmm

11KV XLPE Cable 3x120/70 sqmm Termination Kit

33kv 3x300 sqmm cable

33kv o/d termination kit

33 kv lightening arrestor

33kv post insulator

Transportation from central store to site ACSR Dog conductor

11KV Pin Insulator

11KV GI Pin

11KV Disc Insulator

11KV Disc Fitting

Gi wire

Earthing rod

ABC Cable 3x120/95/50/25sqmm

Stay set complete

Stay wire

3 phase distribution box

Battery charger

Battery set

Safe Carriage of 9/11 Mtr ST pole/PCC Pole from Dump site to pit site

Fabrication errection of sub station type double pole on ST pole along with fixing of necessary clamp ,accessories required including supply and fixing of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per respo specification ,making 11 KV Busbar by single core PVC .Only pole and pin with insulator clamp nutbolt provided by department

Errection 9 mtr ST Pole by digging pit upto 1/6 depth of pole errection of pole refilling of earth and proper ramming Binding of LT line accesso-ries

Laying of LT Cable 1x240/400/630 sqmm with suitable size of Al lug all material provide by depart-ment

Hoisting of LT Cable on pole through GI Pipe requied size clamping on pole only cable provided by department

Proper Jumpering of LT Cable on O/H Line

Making 11KV Bus bar on newly erected Double pole and tapping of 11KV line

Prepare proper space for construction of plinth

Construction of T/F plinth of size 2x2x1.2 Mtr with first class bricks and massonary work in the ratio 1:4cement and course sand fiiling of structure completely as per norms with RCC Top 1:2:2 cement sand and course sand stone gritt with MS bar and MS chaanel for resting of T/F.All material provide by contractor exept T/F

Fabrication and fixing of wiremesh fencing around the11/0.4KV T/F and DP Box made as per require-ment 2mtr height 45x45x5 mm angle frame and 1 No horizontal runner by 40x5 mm MS flat then welding of wiremesh on it 50x25mm made of 12 SWG ,diagonal bracing of all the frame panel welded with MS flat 25x3mm support,groutin properly by cement concrete and course sand all material provided by contractor

Fabrication and fixing of DP box stand made of MS Angle ,grouting and plinthing of the same all material provided by contractor

Fabrication and fixing of Metalic Distribution Pillar box on stand with Nut bolt made of 20 SWG BP Sheet with door 18 SWG BP Sheet ,with fixing of 2 Nos MS Angle for mounting of Fuse unit then fixing of fuse unit 500 Amp 650 Volt and 3 Nos copper Bus Bar and 1 No Al Busbar all material arrange by contractor

earthing of Pipe type with 60 feet deep boring and provid-ing jindal make pipe "B" class 1" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe

Laying stringing and sagging of 3phase 3 wire 11KV Line by ACSR Dog Conductor. Only conductor provide by department.

Laying of 11 KV cable3 x70 sqmm in pukka road by drilling method

Hoisting of cable will be passed through GI pipe required size duly clamped with pole at the bottom ,middle and top of the pole

High pressure testing of 11KV Cable by high pressure equipment

Errection and commissioning of AB Conductor of size 3x120/95/50/25sqmm

Dismantling of jurjer AB Conductor after,opening of binding from insulator its rolling and carriage back to JE Dumpstore

Disconnection and reconne-ction of existing consumer connection

Commissioning of 3 Phase LT Distribution Box and connect with AB Conductor by the help of PVC Single core cable Only Box provided by department

Supply and fixing of clamps

Holding clamp

LT Clamp for pole with GI Strip and schckle insulator

Crimping Al Lugs 240/400/630 sqmm

Copper L-Piece for T/F

Nutbolts off size

Danger board with clamp

Sundry Item

Eye Rag Bolt

Turn Buckle

Grouting binding nozzelling of stay set complete including fixing of necessary clamps accessories Grouting material provided by contractor

Ordinary Earthing by MS Earth rod2500 mm long by GI wire all material provide by department

Fixing and installation of 11KV /33KV O/D type XLPE Jointing Kit ,olny jointing kit provide by department

Providing fabrication and fixing of DO Fuse set

Providing Fabrication and fixing of 11KV TPMO Set

Grouting of pole by cement course sand and brick ballast Civil material provided by Contractor

Painting of ST pole by 2 coat of red oxide and 2 coat of Al paint Paint provided by contractor

Safe installation of 11/0.4 KV 250 KVA T/F its connection from 11KV line and LT line mounting of copper L-piece providing and fixing of al lugs, Labour and T&P by contractor.

Istallation of battery and battery charger properly at control room and connect with supply system

Opening of 33KV Cable after opening from supply system from 10 MVA Power T/F

Opening of 33KV Jumper after opening from supply system from 10 MVA Power T/F

Dismantling of Power T/F from damage plinth by the help of Hydra and placing temporary plinth

Dismantling of damage plinth,remove waste material and its dispose off upto 50 Mtr Distance

Construction of new Plinth of size 4x3x1.3 including excavation of foundation base in concreting in ratio 1:6:12 first class bricks work in cement morter of ratio 1:4 foundation CC in 1:4:8 ratio(cement ,fine sand and brick ballast) and RCC workin Ratio 1:2:4 (cement,course sand,stone ballast)of 20mm using MS Bar of 10mm dia in reinforcement including its cutting ,bending and binding with required shape .the work also includes Laying of 2 Nos 3.46 Mtr Rail Piece complete with cutting welding and proper fitting etc material provided by contractor

Reerrection of Power T/F by the help of Hydra

Reconnect of 11KV side Cable and earthing

Rejumpering of 33 KV side conductor

Fabrication of LA 33 KV LA structure with 125x65 MS Channel and MS Angle for LA Grouting Painting of the same

Mounting of Post insulator and LA

Suply and fixing of missing Guard angles on 11KV Existi-ng pole with the help of x-arm clamp

Fabrication of Guards

Craddle guarding of existing 11KV Line

Chemical type earthing by digging of pit fixing of electrod earthing rod filling of Bentonite powder around the rod and water ,connect the GI Strip 32x5 mm with wiremesh fencing and DP Box

DEEPAK ENGINEERING

RAJ ENTERPRISES

A. A. ENGINEERING CO.