Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 CrAdmitted-Finance | ₹1.0 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.1 Cr+₹11.9 L (11.6%)Admitted-Finance | ₹1.1 Cr+₹11.9 L (11.6%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SAKTHI ENGINEERS L2 | SELVA GANAPATHY ENGINEERING L1 |
|---|---|---|---|---|---|
| 1.00 | 3 mm SS 304L Plate - Supply, lining on floors of concrete floor having MS Embedded plate grids involving Inspection /Rectification of Floor EP's Required, forming of sheets, chemical cleaning, cutting, laying liner panel on EP grids, GTA welding, DPT, Vacuum box testing and passivation as per technical specifications at active area. (Plates corrosion rate shall be less than 12 mpy as per testing done with ASTM A 262 Pr. A & C corrosion test method) | 105 | Sqr.Mtrs | 25,000 ₹26,25,000 | 21,200 ₹22,26,000 Lowest |
| 2.00 | 6 mm SS 304L Plate - Supply, lining on floors of concrete floor having MS Embedded plate grids involving Inspection /Rectification of Floor EP's Required, forming of sheets, chemical cleaning, cutting, laying liner panel on EP grids, GTA welding, DPT, Vacuum box testing and passivation as per technical specifications at active area. (Plates corrosion rate shall be less than 12 mpy as per testing done with ASTM A 262 Pr. A & C corrosion test method) | 28 | Sqr.Mtrs | 44,500 ₹12,46,000 | 40,000 ₹11,20,000 Lowest |
| 3.00 | Supply & lnstallation of HUS3-C 8/10 SCREW ANCHOR for anchorage of 6mm thick MS flats on concrete floor at active area up to 50mR/Hr with Special Work Permit. | 800 | Nos. | 600 ₹4,80,000 | 520 ₹4,16,000 Lowest |
| 4.00 | Erection of SS pipe sub-assemblies which involves preparation of spool drawings as per approved process flow sheet with actual site measurement transportation of pipes fittings valves etc from store to site acid cleaning, bending of pipes ,final erection of pipe sub-assemblies along with inline specialities on permanent pipe supports of pipe spools /lines (pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit. | 400 | Inch mtr | 725 ₹2,90,000 | 720 ₹2,88,000 Lowest |
| 5.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at inactive area | 200 | inch Dia | 1,850 ₹3,70,000 | 1,600 ₹3,20,000 Lowest |
| 6.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit. | 250 | inch Dia | 3,750 ₹9,37,500 | 3,040 ₹7,60,000 Lowest |
| 7.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Fillet welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at inactive area | 200 | inch Dia | 1,200 ₹2,40,000 | 1,100 ₹2,20,000 Lowest |
| 8.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Fillet welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit. | 350 | inch Dia | 2,500 ₹8,75,000 | 2,000 ₹7,00,000 Lowest |
| 9.00 | Erection of CS pipe sub-assemblies which involves preparation of spool drawings asper approved process flow sheet with actual site measurement transportation of pipes fittings valves etc from store to site cleaning, bending of pipes ,final erection of pipe sub-assemblies along with inline specialities on permanent pipe supports of pipe spools /lines (pipe size upto 25 nb are accounted as 1") at inactive area | 50 | Inch mtr | 300 ₹15,000 | 245 ₹12,250 Lowest |
| 10.00 | Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of CS pipes, fittings and specialities using SMAW process (pipe size upto 25 nb are accounted as 1") at inactive area | 30 | inch Dia | 750 ₹22,500 Lowest | 750 ₹22,500 Lowest |
Tender Value
₹1.0 Cr
EMD Value
₹2.1 L
Closing Date
21 Oct 2024, 3:00 pmClosed
GM, INRPK
GM, INRPK Kalpakkam
Fabrication, Supply and Erection of SS lining and Piping works in various area of WIP and UOF
2024_BARC_828621_1
BARCF/INRPK-MA/WM/TR/17/2024
Open Tender
Miscellaneous Works
Item Rate
365 days
Kalpakkam
Fabrication, Supply and Erection of SS lining and Piping works in various area of WIP and UOF
7 documents required · 7 mandatory
₹0
₹2.1 L
21 Nov 2024
3 Oct 2024
28 Oct 2024
4 Oct 2024
21 Oct 2024
15 Oct 2024
8 Oct 2024 - 14 Oct 2024
Amount
3 mm SS 304L Plate - Supply, lining on floors of concrete floor having MS Embedded plate grids involving Inspection /Rectification of Floor EP's Required, forming of sheets, chemical cleaning, cutting, laying liner panel on EP grids, GTA welding, DPT, Vacuum box testing and passivation as per technical specifications at active area. (Plates corrosion rate shall be less than 12 mpy as per testing done with ASTM A 262 Pr. A & C corrosion test method)
6 mm SS 304L Plate - Supply, lining on floors of concrete floor having MS Embedded plate grids involving Inspection /Rectification of Floor EP's Required, forming of sheets, chemical cleaning, cutting, laying liner panel on EP grids, GTA welding, DPT, Vacuum box testing and passivation as per technical specifications at active area. (Plates corrosion rate shall be less than 12 mpy as per testing done with ASTM A 262 Pr. A & C corrosion test method)
Supply & lnstallation of HUS3-C 8/10 SCREW ANCHOR for anchorage of 6mm thick MS flats on concrete floor at active area up to 50mR/Hr with Special Work Permit.
Erection of SS pipe sub-assemblies which involves preparation of spool drawings as per approved process flow sheet with actual site measurement transportation of pipes fittings valves etc from store to site acid cleaning, bending of pipes ,final erection of pipe sub-assemblies along with inline specialities on permanent pipe supports of pipe spools /lines (pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit.
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at inactive area
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit.
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Fillet welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at inactive area
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Fillet welding of SS 304 pipes, fittings and specialities using GTAW process with Argon for purging and shielding, LP Examination at root and final passes and weld passivation(pipe size upto 25 nb are accounted as 1") at active area up to 50mR/Hr with Special Work Permit.
Erection of CS pipe sub-assemblies which involves preparation of spool drawings asper approved process flow sheet with actual site measurement transportation of pipes fittings valves etc from store to site cleaning, bending of pipes ,final erection of pipe sub-assemblies along with inline specialities on permanent pipe supports of pipe spools /lines (pipe size upto 25 nb are accounted as 1") at inactive area
Fabrication of pipe sub-assemblies involving cutting, edge preparation, fit up, Butt/Nozzle/Mitre welding of CS pipes, fittings and specialities using SMAW process (pipe size upto 25 nb are accounted as 1") at inactive area
Radiography Examinations of Butt weld in Active area
Cutting, Removal, Handling and safe disposal of old existing SS pipes & Structural at active area up to 50mR/Hr with Special Work Permit
Supply, Fabrication and erection of SS Pipe supports/ladder/structural from SS 304L sheets, channels, angles, plates, etc. which involves acid cleaning/shearing/bending/ forming and welding (GTAW), including LP examination and weld passivation at active area up to 50mR/Hr with Special Work Permit.
Supply of CS plates, Flats/ Angles/ Supports (IS 2062), Fabrication structural platforms or supports for equipment / piping, welding by SMAW process, installation and painting including LP examination of all welds at active area up to 50mR/Hr with Special Work Permit
Fabrication, Testing & Supply of 8 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 15 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 25 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 40 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 50 NB Manually Operated SS 304 Ball valve as per tech specs
Fabrication, Testing & Supply of 8 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 15 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 25 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 40 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 50 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 80 NB Air Opeated Single Acting Pneumatically Actuated SS ball Valve having Solenoid Valve with Limit Switch as per tech specs
Fabrication, Testing & Supply of 8 NB SS Non-Return Valve as per tech specs
Fabrication, Testing & Supply of 15 NB SS Non-Return Valve as per tech specs
Fabrication and supply of graphite impregnated Teflon bushes for Pan filter, having dimensions as per enclosed drawing. Drawing No. BARCF/M/193
Fabrication and supply of Pure graphite bush bearings for Calciner’s screw feeder, having dimensions as per enclosed drawing. Drawing No: NRPK/UOF/CALCINER/SCREW FEEDER NDE BEARING
Fabrication and supply of Precut single slot SS304L shim sheets having size 40 X 40 mm with a slot width of 13 mm of various thickness (mm) 0.05, 0.1, 0.2, 0.4, 0.5, 0.7, 1.0, 2.0 and 3 as per enclosed specifications
Fabrication and supply of Precut single slot SS304L shim sheets having size 50 X 50 mm with a slot width of 17 mm of various thickness (mm) 0.05, 0.1, 0.2, 0.4, 0.5, 0.7, 1.0, 2.0 and 3 as per enclosed specifications
Fabrication and supply of Precut single slot SS304L shim sheets having size 75 X 75 mm with a slot width of 21 mm of various thickness (mm) 0.05, 0.1, 0.2, 0.4, 0.5, 0.7, 1.0, 2.0 and 3 as per enclosed specifications
Fabrication and supply of SS 304L rings of OD: 564 mm, ID: 541 mm and thickness 5mm (Rectangular cross section)
Fabrication & Supply of M16 SS studs of length 1 meter
Fabrication and supply of multi pocket dust collection filter bag of Diameter: 560 mm, Length: 750 mm, Number of pockets : 20 as per technical specifications
Supply of 6 mm to 12 mm thick SS 304L Plate as per department approved split-up quantity in conformance to technical specification (Annexure-I), ASTM A240 standards with supplementary corrosion rate requirements (Corrosion rate shall be less than 12 mpy as per testing done with ASTM A 262 Pr A & C corrosion test method).
SAKTHI ENGINEERS (BID ID -3106974)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 9.06 MB
TenderDocumentTR17.pdf
Tender Documents • 1.34 MB
GCC14.pdf
Additional Documents • 1.50 MB
BOQ_870723.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .