Electrical work in existing screening area OPD and renovation of commercial shop in Madhav Ashirvad building near Dr Ambedkar KMC Hospital Khopoli

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material dumping/carting away the debris out of hospital premises all complete as specified and directed.

Applying 15 mm cement plaster with 1:6 cement mortar including labour, racking out joints, hacking the concrete surfaces at all floors and levels in quantities as required at site including scaffolding, curing, etc. complete all as directed by Engineer-in-Charge

ALUMINIUM PARTITION WORK Providing & fixing aluminum partition to the required height partly glazed and partly paneled or fully glazed or fully paneled using aluminum section of Jindal satin finish anodizing of required size for bottom, top, middle & vertical rails at required intervals paneling with 12mm thick Nova pan or anchor both side pre-laminated board fixed or HPL compact boards are laminated on both sides with suede finish. Top surfaces shall be Melamine- coated which is scratch and impact resistant with sloping aluminum beading around with neoprene gasket glazing with 5.5 mm frosted/ bajri/ plain glass of approved make like M/s.Triveni, Shri. Vallabh/J/A/G pilkinten fixed with aluminum channel beading two way PVC lining/ rubber gasket to ensure water tightness and No’s rattling including providing necessary cover mould using suitable aluminum section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including providing and fixing necessary fittings as specified and directed. Fully paneled 100 mm x 50 mm Alluminium textured partly panneled & Glass partition work

Two track aluminium sliding window with powder coated/anodized using 5.5mm thick glass sheet of approved make and quality plain / frusted / bajari glass of approved make Triveni / Shri Vallabh /J / A/ G/ pilkinten fixed with aluminium beeding channels with two way rubber gasket / PVC lining to ensure water tightness and Nos rattling for aluminium grill fixing with Fchannel beeding using satin finish anosdized 15 micron jindaL sections for shutters and frame of required size and section including using aluminium / S.S. hinges of required size of Archies make, tower bolt of required size of Archies make , C type alum handle for shutter of Archies make and other necessary hardware as per requirement etc. complete all as per specified and directed by Engineer in charge.

ALUMINIUM SHUTTER Providing fixing door frame & shutter side hung to consist of partly glazed partly panneled/ fully panneled/ fully glazed with 5.5mm thick glass sheet of approved make and qualit y plain or frosted of bajri glass of approved make like M/s. Triveni/Shri Vallabhj/J//A/G pilkinten fixed with two WAY PVC lining/rubber gasket to ensure Nostes tightness and Nos rattaling and panneling with 12 mm thick Nova pan or Ancholam finished on both side OR HPL compact boards are laminated on both sides with suede finish. as required using extruded alumimium section for shutter frame jindal 2425 45 45mm satin finish aNosdized including P/F push-pull plates handles & approved make & heavy duty fittings like tower bolts of Archies/Everite make Motice lock of Laxmi/Gold locks with keys hinges of 5 inch or 6 inch as per requirement hydraulic door closer/ floor spring of Henco/Hyper/Everite make of suitable capacity etc. complete as specified and directed. With powder coated or Anodised

Providing & Applying one coat of primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Goodlass Nerolac/ ICI to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors, aluminium window frame & glass etc including scaffolding etc as to the entire satisfaction of engineer in charge. Using Acrylic emulsion paints ( Plastic Paints) Paint 1 COAT

S.S. SINK: - Providing and fixing in position Stainless Steel sink with drain board or without drain board of Nirali make only resting over bracket with waste coupling including fabricating bracket from 'B' class GI pipe with necessary welding, chiselling in wall and fixing the sink in position with waste coupling, bottle trap all complete as per the specified and directed by engineer-in charge. SS Sink WithDRAIN BOARD (ELEGANCE 1.00 MM THICK)SS Sink with Drainboard

E.W.C.: Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, level white P.V.C. flushing cistern with capacity as mentioned below, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. It should include 'P' or 'S' trap as per approved make with left or right vent in position including fixing it on chair brakcet or wall bracket. With necessary C.P. brass screws & plugs etc. Make : Hindware/Parry ware/cera Floor mounted EWC Universal with 5 to 7 Ltrs Cistern white colour shall be 58 cm long. with jet spray and necessary fitting.

Providing & supply of Syntex tank Water tank 500 Litre

Providing & supply of Syntex tank Water tank 200 Litre

Supplying Installing Testing and commossioning of 2 HP open well submerrsible pump of Crompton/Kirloskar make with all necessary fittings and fixturs and as per directions of EIC.Pump specifications as below 1)Head Range 33-48 mtrs 2) Suction X Delivery 100 mm X 100 mm Or as per manufactures specified. 3)Single phase 4) Discharge range 675- 500 LPM 5) Voltage 415 V 6) Power 7.5 KW 7) Power 10 HP 8) Speed 3000 RPM 9) Frequency 50Hz

C.P.V.C. PIPE 25 mm dia- providing, laying , jointing, fitting & testing C PVC pipe SDR of heavy quality following dia for hot & cold water distribution system of approved make (prince, fiNoslex, supreme, liason, Astral make) including all fittings required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings etc. complete all as per specified and directed by Engineer in Charge.

M S grill work required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including three coats of `B' class enamel paint including primer coat and fixing in position.Structural Steel platform and Grill

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Supply Skilled Manpower( Plumber/Carpentar)

Supply , Installation ,testing & Commissioning of Split type Airconditioners with non invertor Scroll Compressor comprising Indoor Air, Outdoor Condensing unit with ecofriendly gas and blue fins , with stand and all other necessary hardware for proper hanging of units. The units include with all necessary piping with insulation , cables, and Drain pipe with insulation etc complete in all respect as per instructed and as directed by OIC-ES. Hiwall split 2.0 TR

Distributionn Boards

8 Way VTPN DB comprising :- Incomer a) 1 No. 100 A, 433V, 25 KA, TPN MCCB , neutral links, etc. Outgoing a) 2 Nos. 63A, TP, MCB b) 2 Nos. 40A,TP, MCB c) 8 Nos. 25A, SP, MCB d) 2 Nos. 40A, DP, MCB

Supply and fixing of TPN, double door Power Distribution Board having 63 amps TPN MCB--1 No. /// 40 amps DP ELCB(100 mA)--3 Nos /// 20/25 amps SP MCB (8ways)--24 Nos.

Supply and fixing of SPN, double door Power Distribution Board having 40 amps DP MCB--1 No. /// 20/25 amps SP MCB (10ways)--10 Nos.

Supply and fixing of 160 amps manual changeover

Supply and fixing of metal clad socket Plug Outlet with 25A SP MCB In enclosure

Supply and fixing of 40A DP MCB In enclosure

LT Cables & Terminations

Supply and laying of 1.1KV, PVC/XLPE armoured cable 4Cx25 sqmm AL conductor on wall/ in provided tray as per instructions.

Supply and laying of 1.1KV, PVC/XLPE armoured cable 4Cx4 sqmm copper conductor on wall/ in provided tray as per instructions.

Supply & laying of 6 sqmm copper flexible wire

Supply & laying of 4 sqmm copper flexible wire

Supply and fixing of end termination with brass double compression gland and copper lugs for following size of PVC insulated and PVC Sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

4C X 25 Sq.mm.

4C X 4 Sq.mm.

EARTHING

The chemical earthing shall be with use of Pipe in Pipe with use of tow co-axial pipe joined ogether.The cavity in-between the electrodes is filled with crystalline conductive compounds IonFill or CompactFill for current dissipation and anti corrosive properties.The electrode cross section has to be circular for the uniform distribution of fault current all around from electrode to earth. The lenght of Electrode shall be approximately 3 Mtrs, Inner dia of pipe 29.6 x 2.6 mm & Outer diameter of Pipe 48.4 x 3.2 mm complete with chember.

Supply and fixing of 25 mm x 3 mm GI strip on surface or in cable tray for connections etc as required.

Supply and fixing of 8 SWG COPPER wire on surface or in cable tray for connections etc as required.

MAINS WIRING

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Providing fan regulator on board with modular Switch and regulator.

Supply & fixing od 38mm PVC Casing capping.

Supply & fixing of 25mm PVC Conduit.

Switches, sockets & accessories

Supplying and fixing of 3/4 module switch box with modular plate including connections but excluding modular plate etc. as required.

15 amps switch

5pin 5/15 amp socket outlet

Lighting Fixtures / Exhaust fans / Ceiling fans

Supply and erecting of box type LED light fitting with 1 X22W led tube light complete with all accessories.

Supply and fixing of 225 mm sweep exhaust fans.

Supply and fixing of 1200 mm sweep ceiling fans.

ONLINE UPS

6 KVA ONLINE UPS with inbuilt isolation transformer, 1 phase input / 1 phase output, with 30 min, backups.

Sine Wave Inverter

6 KVA Sine Wave Invertor having 1 phase input / 1 phase output, with 2 Hours backups.

Supply & fixing fan down rod made out of GI conduit pipes of 20 mm or suitable with threading, boring etc. Complete up to 18Inch long etc. Complete in all respect.

Supply & Fixing of 1.50Inch casing capping.

Fixing & fixing of 15W LED lamp

Supply & fixing of 20 A DP MCB with enclosure

Supply & fixing of 32 A DP MCB with enclosure

Supply & fixing of 40 A DP MCB with enclosure

Supply & fixing of 6 Amp modular switch

Supply & fixing of 16 Amp modular switch

Supply & fixing of 6 Amp modular socket

Supply & fixing of 16 Amp 5 pin modular socket

Supply & fixing of fan dimmer, 400/600W

Supply & fixing of 1 or 2 way modular box

Supply & fixing of 3 way modular box

Supply & fixing of 6 way modular box

Supply & fixing of 1 way modular face plate

Supply & fixing of 2 way modular face plate

Supply & fixing of 3 way modular face plate

Supply & fixing of 6 way modular face plate

Supply & fixing of 18W surface mounted LED lighting fixture

Supply & fixing of 1200 mm sweep ceiling fan

Providing & fixing of 1 phase decorative type 4 speed wall mounted fan, roller button, having swap facility

Supply & fixing of 225 mm exhaust fan

Supply & laying of 1.5 sq. mm copper wire

Supply & laying of 2.5 sq. mm copper wire

Supply & laying of 4 sq. mm copper wire

M J INFRA PROJECT

OM POWER SYSTEMS

NIKHIL CONSTRUCTIONS CO