REPAIR TO ROOF CEILING FLOORING PLINTH PROTECTION BRICK WORK AND PLASTERING IN C2A AND C2B AREA AND WELCOME MAINT OF INTERNAL ELECTRIFICATION AND OTHER EM RELATED MAINT SERVICES IN ZONE D AREA UNDER GE EAST MATHURA

Amount

Taking down cement plaster on brick or stone walls/ceiling concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 finished even & fair complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick/concrete surfaces of in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 10 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 finished even & fair complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved by GE

M&L for preparation of newly plastered surface of ceilling and applying three coats of white wash on ceiling surface complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of oil bound distember over a coat of alkali resistant primer using spray machine, spray hard to receive area to achieve excellent application using limited manpower over and including a coat of 1mm thick wall care putty complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint over a coat of primer (100% Acrylic) using spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Demolition of reinforced cement concrete n exc 15 cm thickness (below or above ground level) (reinforement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and as directed.

M&L 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for layer of sand cushioning 25 mm thick over cement concrete spread complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block with gray cement and pigment of any shape and size conforming to IS 15658-2006 of 80mm thickness M-40grade of concrete as in floors/pavements complete all as specified and as directed.

Material & Labour for road side kerb factory made Precast cement concrete block of mix 1:3:6 type C-1 using 20 mm graded stone aggregate, n exc 100 mm in width jointed in cement mortar 1:4 complete all as specified and as directed.

M&L non skid coloured cermic ENDURA tiles exc 0.06 Sqm but n. exc. 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match the colour of tiles as in laid in floor over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 100mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc. finished the surface even and fair without using extra cement complete all as specified and as directed.

M&L for rubber moulded chequred cement concrete coloured tiles of size 30cm x 30cm x 25mm with grey cement and pigments, laid, set jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Dismantling brick tiles in floors, channels, kerbs, aprons, etc. (each layer) any size laid bedded and pointed in any mortor complete all as specified and as specified.

M&L for complete removal of existing roof treatment consisting of screed, tar felts/APP based membrance etc, and removal of dismantled materials out of MOD land complete all as specified and as directed.

M&L for bitumen felt water proofing treatment using APP based polymeric membrane minimum weighting 3kg/sqm and minimum thickness 3mm reinforced with polyster non wove fabric (but not less than 150gms/sqm) laid over bitumen primer applied @ 0.30 Kg/sqm by torch application complete all as specified and as directed.

M&L for providing cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in coping, roof padding, padding in sunken slab mixed with liquid water proofing compound as per manufactures instructions complete all as specified and as directed. Note : WPC shall be measured and paid separately.

M&L for cement concrete tiles 20cm x 20cm x 20mm thick, with grey cement and no pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Max premium cementitious grout material of JK Cement or its equivalent complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 50mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed.

Dismantling of Asbestos cement corrugated, semi corrugated sheets etc. in roof covering complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in cladding to wall etc, fixed with self tapping screws complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/ blankets, any thickness, including cover fillets. Complete all as specified and as directed.

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.

M&L for 4 mm thick non-asbestos fibre cement building board and fixed on aluminium grid with screws complete all as specified and as directed.

Dismantling timber scantlings 40sqcm and over in section, in any position in framed work complete all as specified and as directed.

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F welded steel wire fabric of weight per square metre n exc 4 kg supplied and fixed complete to wood or steel members complete all as specified and as directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks, hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) hanging also fastening and fixing complete GDE Fe410-0 or Fe 310-O complete all as specified and as directed.

S&F Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

M&L for Brick work with old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

S&F in repair PTMT Ball valves, high pressure, with polythene float & flynut, screwed for iron pipe or brass ferrule 20mm bore dia complete all as specified and as directed.

M&L for Asbestos cement 6mm thick two adjustable piece plain angular ridge fixed with coach screws piece adjustable complete all as specified and as directed.

S&F 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roof, walls etc fixed with L-type or J-type or cranked hook, bolt complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) hoisted and fixed in position 1000 liters capacity including connections and dismantling existing old u/s water storage tank complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections complete all as specified and as directed.

S&F 15 mm bore GI tubing, medium grade steel tubes, galvanised with and including all fittings fixed to walls and ceiling or laid in floor complete all as specified and as directed.

S&F 20 mm bore GI tubing, medium grade steel tubes, galvanised with and including all fittings fixed to walls and ceiling or laid in floor complete all as specified and as directed.

Taking down existing copper/aluminium point wiring (Light/Fan /Socket or Power Point) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets), removing materials from site and making good the disturbed surfaces of walls, floors etc as per existing specification ccomplete all as specified and as directed.

Taking out existing copper/aluminium sub main wiring of any size and making good the disturbed surfaces complete all as specified and as directed.

Taking down MCB distribution boards with incoming and outgoing controls any make and capacity after disconnecting of electric connections complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, socket, regulator etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 1.5 Sqmm size in green colour for one light/fan/bell point controlled by one switch complete all as specified as directed. Make of cable : Havells/Polycab/RR Kable/Plaza/ Finolex/Gloster

All as per item serial No 50 but surface conduit wiring complete all as specified and as directed.

All as per item serial No 50 but one 3 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and as directed.

All as per item serial No 50 but one 3 pin 5 Amps socket point controlled by one switch on same board complete all as specified and as directed.

All as per item serial No 50 but one light point controlled by two way switch complete all as specified and as directed.

M & L for Point wiring with 2.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 2.5 Sqmm size in green colour complete all as specified and as directed below:- Make of cable : Havells/Polycab/RR Kable/Plaza/ Finolex/Gloster

S & F switch modular type 6 Amps complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/ Crabtree

S&F socket modular type, single pole one module 6 Amps 230 V complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

S&F switch modular type, single pole one module 16 Amps 230 V complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

S&F socket modular type 2-in-1, 5 Pin, 6/16 Amps 2 module complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

S&F modular bell push switch 6 A , 1 Module complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

S&F modular switch 2 way 6 A , 1 Module complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

Supply and fixing Bell Multi Music type, 230 Volts complete with connection complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

S&F in repairs of Sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor FRLS cable of size 6 sqmm, 1100 votls grade drawing through concealed PVC conduit 20 mm dia medium duty and including PVC insulated 6sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and as directed. Make : Havells/RR Kable/Polycab/Gloster Note : Two runs of 6 Sqmm cable, one run of 6Sqmm earth wire & 20mm PVC Conduit shall be measured as one unit length

S&F in repairs of Sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor FRLS cable of size 4 sqmm, 1100 volts grade drawing through concealed PVC conduit 20 mm dia, medium duty and including PVC insulated 4sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and as directed. Make : Havells/RR Kable/Polycab/Gloster Note : Two runs of 4Sqmm cable, one run of 4Sqmm earth wire & 20mm PVC Conduit shall be measured as one unit length

S&F in replacement of indoor decorative ultra slim surface /Wall mounted aluminium extruded T5 LED batten tube light complete fitting 1x 18 watt 4' LED Tube fitting complete all as specified and as directed. Make : Make : Havells/CG/Philips/Wipro/Syska/Bajaj/Surya

S&F in replacement of LED T-5 Intergrated Batten PC housing extruded 2' light fittings 9 w Make surya Cat Part No SLE BT 10 complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj/Surya/C&S

S&F LED retrofit lamp 9 Watt complete all as specified and as directed. Make : Syska/Havells/CG/Philips/Wipro/Syska/Bajaj/C&S

S&F Decorative wall light fitting stainless steel rust free fixture with white glass diffuser with 7.5 LED lamp complete all as specified and as directed. Make : Syska/Havells/CG/Philips/Wipro/Syska/Bajaj/C&S

S&F Decorative wall light fitting stainless steel rust free fixture with white glass diffuser with 9w LED lamp complete all as specified and as directed. Make : Syska/Havells/CG/Philips/Wipro/Syska/Bajaj/C&S

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, Bulk Head fitting of 10 Watt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of complete all as specified and as directed. Make : Crompton/Syska/Havells/CG/Philips/Wipro/Syska/ Bajaj/C&S

S&F in replacement of building street light fitting, IP66 powder coated pressure die cast aluminium with heat resistant toughened glass complete of 40 Watt capacity including fixing arrangement complete with all accessories including connecting up with twin core copper conductor cable with suitable size complete all as specified and as directed. Make : Surya Cart Part No SLE UL 40W IP66 (LXN) or eqvt in Philips/Havells/Syska/C&S

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete all as specified and as directed.

S & F factory made epoxy powder coated Distribution Board TP & N 4 ways (TPN MCB DB ) with metal door ( IP-43 protection ) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with Knockouts complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider/C&S/HPL

S & F 4 Pole TPN MCB 63 Amps ,415 V, 50Hz, with repturing capacity 16 KA complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider/C&S/HPL

S & F factory made epoxy powder coated Distribution Board SPN 8 ways ( SPN MCB DB ) with metal door ( IP-43 protection ) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with Knockouts complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider/C&S/HPL

S & F factory made epoxy powder coated Distribution Board SPN 4 ways ( SPN MCB DB ) with metal door ( IP-43 protection ) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with Knockouts complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider/C&S/HPL

S & F Single pole and neutral (SPN) MCB 40 Amps, 240 V, 50Hz, 10KA breaking capacity complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider/C&S/HPL

S & F Single pole (SP) MCB 6-32 Amps, 240 V, 50Hz,10KA breaking capacity complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/ScheniderC&S/HPL

Supply and fixing Lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make:Havells/Anchor(Roma)/Legrand/Honeywell/Polycab/ Crabtree

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed. Make : Havells/Legrand/L&T/Siemens/Schnieder/C&S/HPL

Supply & Fixing in replacement step type electronic fan regulator (modular type) on the existing laminated sheet including taking down the old unserviceable one complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/ Crabtree/C&S/HPL

S&F in replacement of ceiling fans of size 1200mm sweep, BEE, 5 star rated, 230 volt, including hanging arrangement at site complete all specified and as directed. Note : Depositing the old ceiling fans in MES store yard complete set. Make : Havells/Bajaj/Orient/CG

S&F in replacement of exhaust fan heavy duty 300mm sweep, AC 230 volt metal body single phase including louvers complete all specified and as directed. Note : Depositing the old exhaust fans in MES store yard complete set. Make : Havells/Orient/CG

Taking down unserviceable ceiling fans/exhaust fans of any make and type and rectifying the defects including replacement of unserviceable bearing, winding, canopy set, downrod, capacitor, clamps, painting, wire and reinstalling at same location complete all as specified and as directed. Note : Depositing the old exhaust fan in MES store yard complete set.

Ms Kamal Kant Agarwal

M/s DEVI DAYAL CONSTRUCTION CO

M/s RCC

mh enterprises

B S ENTERPRISES

BHARDWAJ CONSTRUCTIONS

M/s Orient Traders

M/s Aditya Enterprises

M/s Hoti Lal Contractor