Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹6.7 L+₹67,128.21 (11.2%)Accepted-Finance | L2 | Accepted-Finance Accepted | |
| 3 | L3₹7.0 L+₹1.0 L (17.4%)Accepted-Finance | L3 | Accepted-Finance Accepted | |
| 4 | L4₹7.5 L+₹1.5 L (25.0%)Accepted-Finance | L4 | Accepted-Finance Accepted |
Tender Value
₹7.8 L
Closing Date
19 Nov 2021, 4:00 pmClosed
Executive Engineer Lake Division NO.2nd
STP Hazratbal
Repairs/ Renovation of office building of watershed Management Division JK LDA
2021_HAUDD_146964_1
Fresh NIT No_20 of 2021-22
Open Tender
Civil Works
Item Rate
60 days
Watershed Division
Please refer Tender documents.
6 documents required · 6 mandatory
₹700
Executive Egineer Lake Division No.2nd
Exempted
30 Nov 2021
8 Nov 2021
20 Nov 2021
9 Nov 2021
19 Nov 2021
9 Nov 2021
Amount
Earthwork in excavation by manual means (in trenches for foundations drains etc not exceeding as well 10sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m disposed earth to be neatly levelled and dressed. all kinds of soil
p/f of ornamental wooden jaffery fencing panels made of second class deodar wood free from knots and termite and well seasoned wth all sides finished including bracing and fixing of panels into pits with proper consolidation and ramming watering etc etc, all carraiges complete job
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo / Fir wood
p/f of 12mm thick marine plywood conforming to IS:710
Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality
Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete.First class Budloo/Fir wood
p/f of glossy wooden flooring of approved brand and make including fixing of under thermal insulation sheets as per requirement.color shade design as per directions of Engineer incharge complete job.
p/f of wallpaper of approved brand and make including all required materials complete job
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, to prepare the surface even and smooth complete.1 mm thick @ 30% of item 11
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old.
Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture
p/f water heater/geyser pf 50 litres capacity of approved make and 1st quality conforming to IS standards including all fastners , nuts and washers and making connections etc complete job
Providing and fixing brass stop cock of approved quality.20 mm nominal bore
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required
Providing and fixing 15mm nominal bore bib cock long nose of approved quality and colour conforming to IS standards and weight not less than 810gms.sample to be approved by Engineer Incharge.
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 20mm nominal bore, 120mm long, weighing not less than 198gms
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 20.7.1 25 to 40 mm nominal bore
Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
Providing and fixing 25mm beading for flooring of approved brand and quality incl cost of all required nails screws etc all complete
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood. 50 x 20 mm
Repair to existing electic lighting points including cost , p/f of all items wire, lamp, leds, earthing etc complete job
Repair to existing electic heating points including cost , p/f of all items wire, switches, earthing etc complete job
P/f of european type water closet with cistern and health faucet , all fittings and fixtures complete job
FAYAZ AHMAD BHAT
MOHAMMAD ASHRAF MANDOO
NAZIR AHMAD DAR
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .