Electrification work at ISBT OFFICE,BHOPAL (Second Call)

Amount

Electrification work at ISBT OFFICE,BHOPAL

3000012319-Fencing of chain 12 SWG GI Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for for D.P. structure electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 mt. apart or as required. The panel frame with required angle iron/ flat iron members/cross members including mesh welded in frame panel shall be erected between the posts. The angle iron post shall be erected in cement concrete M- 15 (1:2:4) (20 mm graded metal) foundation, including excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade AS PER MP PWD SOR 2020

3000003705- DTR energy meter Supply, installation, testing & commissioning of LT trivector energy meter, DLMS compliant category-A (for substation/feeder metering) , 3 phase 4 wire, 440 Volts, 5 Amp, accuracy class 0.5S with GSM(GPRS compatible) modem suitable for required C.T. 5A duly tested from electricity board with uPVC box AS PER MPPWD SOR 2020

3000002030-CT PT Unit 300-150/5Amp Supplying, installation, testing and commissioning of oil immersed, .5 accuracy class, 50 Hz CT PT combined unit complete with all other materials as required including testing / calibration charges of Electricity board as required. 11 KV/110 V, 3 phase 4 wire CT PT combined unit, 300-150/5Amp. or 200- 100/5Amp. or 100-50/5 Amp. CT ratio

3000012313-Aluminium wound Supplying, installing, testing and commissioning of 11/0.4 KV 3 Phase 50 cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side and star on L.T. side, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required ISI marked & as per IS specification, hand operated off load tap changer switch above 100 KVA, oil conservator with drain valve, plug 63 KVA Aluminium wound 100 KVA AS PER MP PWD SOR 2020

3000012314-Aluminium wound Supplying, installing, testing and commissioning of 11/0.4 KV 3 Phase 50 cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side and star on L.T. side, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required ISI marked & as per IS specification, hand operated off load tap changer switch above 100 KVA, oil conservator with drain valve, plug 63 KVA Aluminium wound 200 KVA AS PER MP PWD SOR 2020

3000012274-AAAC conductors Dog Supplying and drawing all aluminium alloy conductor (AAAC) of approved make conforming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any) AAAC 0.1 sq inch (100 sq.mm Al. EQ.)- (Dog) ( AS PER PWD SOR 2020)

3000013376-G.I. cable tray Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron/hanging rod, for ceiling suspensions, clamp, anchor fastener, nuts, bolts, washers, not more than 1.0 mtr. apart complete as per specification to complete the job. The tray shall be as follows :- 300 x 50 x 1.6mm thick AS PER MPPWD SOR 2020

3000012355-Spring loaded Supplying &fixing of spring loaded busbar screwless connector with enclosure of approved make including required clamp, nut, bolt, connection, testing as per specification to complete the job. Three Phase 3Ph, 1In+6Out AS PER MP PWD SOR 2020

3000012279-XLPE insulated power cable, al.conductor Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor Unarmoured 1 core 150 sq. mm. ( AS PER PWD SOR 2020)

3000012348-DEAD END Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size. AS PER MP PWD SOR 2020

3000012349-Piercing connector Main:16-95sq.mm, tap:1.5-50sq.mm AS PER MP PWD SOR 2020

3000012347-SUSPENSION CLAMP Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size. AS PER MP PWD SOR 2020

3000001215-Clamp for Neutral Supply and installation of Clamp for Neutral

Bidder Name

Amount

M/S ASHOK.K.JAIN(GSTN-23ADFPJ8905R1Z2)

SHIVAY CONSTRUCTION(GSTN-23AYKPB4524L1ZH)

SHIVAY CONSTRUCTION

M/S ASHOK.K.JAIN