FAULT RECTIFICATION WORK (WITH ACCESSORIES) UNDER LIGHTING SYSTEM IN MURLIPURA ZONE FOR 1 YEAR (ANNUAL RATE CONTRACT) YEAR 2026-27

फाल्ट रेक्टीफिकेशन टीम - संवेदक द्वारा जीपीएस मय गाड़ी प्रतिदिन सुबह से रात्रि तक बोलेरो पिंक अप या समकक्ष गाड़ी मय ड्राईवर मय पेट्रोल / डीजल एक लाईनमैन, एक हैल्पर मय औजार व बांस की सीढ़ी 22 फीट लम्बी के साथ सम्बन्धित जोन में जेईएन / एएलआई के निर्देशानुसार चलानी होगी जिसका कार्य सम्बन्धित विद्युत निरीक्षक / कनिष्ठ अभियंता (वि.) के निर्देशानुसार उक्त जोन क्षेत्र के अधीन आने वाले सर्किटों व केबिलों का फाल्ट दूर कर सही करने का कार्य व तथा स्टोर से प्राप्त विधुत सामान को जेईएन / एएलआई के निर्देशानुसार स्थापित करने का कार्य करना होगा। दर प्रति एफआरटी टीम होगी। एफआरटी टीम के कार्य का सुपरविजन सम्बन्धित विद्युत निरीक्षक / कनिष्ठ अभियंता (वि.) द्वारा किया जायेगा जिसका इंद्राज संलग्न परफार्मा/लॉग बुक में कर सत्यापित कर प्रतिमाह अधिशाषी अभियंता विद्युत कार्यालय में प्रस्तुत करना होगा। संवेदक द्वारा दुसरी गाड़ी निर्देशानुसार लगानी होगी जिसकी दरें पहली एफआरटी के समान होगी। (गाडी + लाईनमैन + हैल्पर + सीढी (1161.60/- 500/-350/- 50/- = 2061.60 /- रू.) प्रतिदिन

Item Rate BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (Part-B) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) (NON BSR)

NUMBER #

Providing of M-Seal Putty on all joints, and demage part of pole, main penal,Feeder penal junction box in zone area as required by Engineer in charge.

Providing of insulated Tap on all joints, and demage part of pole, main penal, Feeder penal junction box in zone area as required by Engineer in charge.

P & F of fiber sheet on existing panel and open door of highmast and pole as per direction of enginner incharge.

P & F of FR PVC insulated & unsheathed Aluminium conductor 2X 2.5 Sq mm ISI marked (15:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (Part-C) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) (RUDIP BSR 2023)

NUMBER #

(60.2) P & F of P.V.C. / XLPE insulated & P.V.C. sheathed Un Arrmoured /Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

(60.2.4.3) Arrmoured pvc cable 16sq. Mm 4 core

(60.1) P & F P.V.C. / XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

(60.1.2.1) Unarrmoured pvc cable 6 sq. mm 2 core (Round shape )

(60.1.1.1) Unarrmoured pvc cable 4 sq. mm 2 core (Round shape )

(55.1) P & F of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

(55.1.1.2) 6 A to 32 A rating

(55.1.1.4) 50/63 A rating

(68.24) Supplying and drawing of XLPE insulated LT Aerial bunched Aluminium conductor cable confirming to IS 14255/1995 and IS 398 (Pt-4)/ 1994 and as per Discom Specs. on existing cross arms through I hook with all necessary T&P required including binding and twisting etc. complete in all respect as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

(68.24.2) 1 X 25 sq. mm. + 1X25 sq. mm. (insulated)

(68.3) Supply and fixing of following LT Supporting accessories with nut bolt & Clamps made out as per standard Discom's specifications with two coats of Red oxide and two coats of Aluminium paint etc. as required. All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

(68.3.3) Suspension clamp with eye hook & Pole clamp

(68.3.4) Dead end clamp with eye hook & Pole clamp

(57.14) Providing & Fixing of AC operated heavy duty 230 /440 Volt powercontactor as per PWD specification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR

(57.14.2.6) 100 Amp ,4 pole Power contactors with following AC 1 Rating

(57.2) Providing & Fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and AC1 rating of 16-20 amperes including making connection, programming conforming to IEC 60730-1 and 60730-2-7 etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

(57.20.3) One day & week reserve (digital type )

Please Enable Macros to View BoQ information