Supply and Installation of Furniture articles, Switchgear and ELV Items at Transport Nagar, Bhimpore, Nani Daman.(E-30595)

supply and placement of Wooden Dining Table with 6 seater Sitting Arreagement Including M S / S S stand Support in conference as per drawing and the 3D as per architect design, including all the necessary hardware and accessories required.(Size of Dining Area-1.5 x 0.815 Mt-1 Nos) (two size of Sitting Area-1.5 x 0.31 mt ) 6 sitting Capicty for each Table

Supply Of MS Bed Single Size 1.5 mt X 0.9 mt Fitted With 12mm Plywood, Plywood-mr Grade Coy Marine Gold, Mattresses Curlon 4 Inch and Two set pillow, Back Support & Leg side Support,Bed side Table Size 410mm X 410mm X 570mm Height With two drawers Provided as per architect design and approved Brand

Providing and fixing custom-made wooden cash/reception counter of size 1800×600 mm with 1200×600 mm side return table, fabricated in 18 mm BWP plywood, finished with 1.0 mm decorative laminate on exposed surfaces, internal white laminate, 25 mm thick laminated counter top and 2 mm PVC edge banding, including all necessary supports, hardware, adhesives, fixing and complete finishing, as per approved design

Digital Eco viny printing sing board pasted on A . C .P (Aluminium Composite Panel)Sheet with front sideimported clear Acrylic sheet and fancy Photo Framing with fitting at proper Location as directed by engineer in charge.

LED SING BOARD LETTER As per drawing including TRANSPORT NAGAR LOGO for that Backlit Signage having 3D Acrylic Aluminum Channel Letters (75 mm deep) With Backside of Acrylic Letters will be supported with ACP Letters & Inside LED will be fixed to illuminate.(5 years Warranty) Backside of Entire Letters & Logo will supported with 8 mm M.S Letters which will be Laser cut with M.S. Stiffener. All M.S. Letters are Laser Cut having M.S. Sheet -8mm & fixed on Main Entrance (without Scaffolding)(Inclusive of Installation)(Backlit Stand Alone Signage)(Letter Height :0.90 mt and lenght up 13.30 mt)Entry and Exit gate

Supply,Installation Testing and Commissioning for Manual BOOM BARRIER at entry and exit gate as per specificaion (a) Boom Length up 6mt with operation should be activated by a single Push button and option to operate wireless through remote rang up to 30 mt(b) opening and closing speep up to 0.4 to 2.5 sec with power 165w, MCBF-15 million , 100% ducty cycle(c) Safety Device link Beam Magnetic Loop sensor should be provided with the Barrier(d) Arm rest with keys and control unit ect should be housed in heavy Stainless Steel,BIS AND ISO Certification Must Required and 2 year warranty for Approved Make and desing with all respcted civil work ect.

Providing and Fixing SM -610 is heavy Duty rubble speed breaker used in high traffic and crossing area to ensure vehicle speed Control and improve safety as per specification - Height approx 75mm with Fixing Anchor bolt mounting and black with reflective yellow panels for commercial Parking areas and all complete as per direction of Engineer In-charge.

Supplying and fixing of reflective road studs moulded out of ASA or HIPS or ABS or any other suitable material approved by the Engineer with reflective panels consisting of number of lenses containing single or dual prismatic cube capable of providing total internal reflection of light entering the lens face. The road stud width shall not exceed 130mm and height shall be not less than 10 mm and not exceeding 20mm. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The slope of the reflective road stud shall be 35 +/- 5 degree to base and area of each lens shall not be less than 13 sq. cm. The stud shall also meet all the testing conditions of ASTM D4280 and must be fixed to the road surface using the epoxy adhesive only as recommended by the manufacturer. The contractor shall submit a two years warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. In addition, a two years warranty for satisfactory in field .

IN CSS (Compact Sub station) :- Supply, Testing & Commissioning of 500 kVA Unitized Sub-station consisting of (1 no 630 A HT VCB as incomer + 500 KVA Dry type Transformer with 1200 A breaker L.T. Switchgear ) with space for CT PT units in CSS . all connection accessories, fitting & auxiliary equipment in an Enclosure to supply Low-voltage energy from high-voltage system as detailed in this specification. The complete unit shall be installed on a substation plinth (base) as Outdoor substation located at very congested places as direct engineer in charge. ( HT RMU Supplying, Erecting, Testing & Commissioning of 3 Way RMU , 11KV, which should be have 1 Incomer Isolators of 630A and 2 outgoing SF6 Insulated Vaccume circuit Breakers of 630 A for Transformers protection, All functions Of Isolators and Breakers should be supplied with Motorised Mechanism for remote operation ON/OFF of RMU, Each Isolators and Each Breaker function should be supplied with motorized mechasism and also with electrical and Mechanical Interlocking )