Construction of 02 Nos D Type Qtr at Sarat PHC in the District of Mayurbhanj.

CIVIL Work

Earth work excavation for foundations in hard soil with initial lead and lift including levelling and dressing with all labour T & P articles, safety measures, incidentals, necessary required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Filling foundation and plinth with sand well watered and rammed including cost, conveyance of materials, labour T&P, royalty etc.complete as per direction of the Engineer-in-charge.

C.C.(1:3:6) in foundation and plinth with 4 cm size hand broken hard granite metal of approved quality from approved quarry including hoisting, lowering and laying in position in layers not exceeding 15cm thick with proper compacting the concrete by means of vibrator to proper slope and level including curing, dewatering shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty and taxes of all materials required for the work as per specification and direction of the Engineer-in-charge.

Cement concrete (1:2:4) with 12mm size HG chips of approved quality from approved quarry in foundation including hoisting laying concrete including royalty, watering curing etc.complete.

R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.

column base

Grade beam/Plinth band

Column & Beam

Lintel

Roof slab

Stair case

Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge.

HYSD(Ground FLOOR)

Flyash.brick masonary in C.M.(1:6) in Foundation and Plinth with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.

In Foundation & Plinth

Flyash.brick masonary in C.M.(1:6) in Super Structure with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.

Brick Work in Superstructure

16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

16mm thick C.P(Ground floor)

12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

12mm thick C.P(Ground floor)

6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

6mm thick C.P(Ground floor)

Supplying fitting and fixing vetrified tile in floors of size 600mmx600mm of approved make with appliction of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour T&P etc.required for the work.

Vetrified tiles(Ground floor)

Fixing vetrified tiles in dados skirting and risers of steps on 12mm thick cement plaster(1:3) jointed with neat cement slury mixed with pigments to match the shade of tiles/marbles including rubbing and polishing etc. comp.

vertified tiles in dados(Ground floor)

Chajja

shelves

Supplying, fitting and fixing Granaite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc complete as per direction of the Engineer-in-charge.

Granaite tile(Ground floor)

Supplying, fitting and fixing MS Door & window shutter including cost of all materials etc.complete as per direction of the Engineer-in-charge.

Painting two coats over a one coat of primer work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.

Finishing wall surface with Acrylic wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials, labour and T&P etc.complete as per direction of the Engineer-in-charge.

Acrylic wall putty(Ground floor)

Finishing walls with plastic emulsion paints with any approved shade of paints and labour etc. complete.

Plastic emulsion paint(Ground floor)

Finishing wall surface with two coats of weather coat over a coat of primer including cost, conveyance and taxes of materials with all labour and T&P etc.complete as per direction of the Engineer-in-charge.

Weather coat (Ground floor)

2nd Floor

2nd floor

Brick work with fly ash brick 25cmx12cmx8cmx size having super structure (5" wall)(ground floor)

Industrial tiles in floors(Ground floor)

Supplying, fitting and fixing Anti-Skid Industrial tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 30mm x32mmx2mm @ 0.90mtr C/C and stainless steel square pipe bracing of size 32mmx32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing with cost conveyance royalties and taxes of all materials and labour etc.complete

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Casenent Door-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm casement Door Sash profile and 74mm x 60mm x 2.5mm mullion peofile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm for outer frames. 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN. complete as per direction of the Engineer-in-charge.

Excavation of any approved type of soil in approved borrow area by mechanical means loading into and transporting by mechanical means and unloarding the soil with a lead of 6km

Supplying, fitting, fixing of two track UPVC Sliding window track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with 6mm thick glass of approved quality complete with frame. Sutters and all fitting and fixtures including cost of all materials, labour and T&P etc. complete as per direction of the Engineer-in-charge.

25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. .complete as per direction of the Engineer-in-charge.(Ground floor)

Providing fixing and fitting of 110mm dia P.V.C. rain water pipe of approved quality and approved make confirming to I S with necessary bends and clamps etc.complete fixed to wall with nail etc as per the direction of EIC including cost of all material with taxes labour T&P etc complete

1st Floor

R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.

Column & Beam

Lintel

Roof slab

Stair case

Dismetalling of grading concrete from RCC roof and stacking the useful materials for reuse and removing the debris away from work site with all labour & T&P etc.complete as per direction of the Engineer-in-charge.

Dismetalling and removing brick masonry upto 3m height including stacking useful materials for reuse etc.complete as per direction of the Engineer-in-charge.

Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge.

Flyash.brick masonary in C.M.(1:6) in Super Structure with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.

(Brick work in super structure) 1st floor

16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

16 mm cp (1st floor)

12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

12mm thick C.P(1st floor)

6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

6mm thick C.P(1st floor)

Dismentling and removing Doors and windows and removing the debries away from site. and removing the debries away from site. with all labour & T&P etc.complete as per direction of the Engineer-in-charge.

Shelves

Supplying fitting and fixing vetrified tile in floors of size 600mmx600mm of approved make with appliction of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour T&P etc.required for the work.

Vetrified tiles(1st floor)

Fixing vetrified tiles in dados skirting and risers of steps on 12mm thick cement plaster(1:3) jointed with neat cement slury mixed with pigments to match the shade of tiles/marbles including rubbing and polishing etc. comp.

Vetrified Wall tiles(1st floor)

Chajja

25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. .complete as per direction of the Engineer-in-charge.(1st floor)

Providing and fixing Granite tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Granite tiles( 1st floor)

Industrial floor tiles( 1st floor)

1st floor

Painting two coats over a one coat of primer work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.

1st Floor

Finishing wall surfce with acrylic wall putty (water based) of approved make a finished smooth and even surface to receive painting including cost of all materials taxes labour T&P etc complete.

1st Floor

Finishing walls withone coat primer & two coat plastic emulsion paints with any approved shade of paints and labour etc. complete.

1st Floor

Weather seal coat two coats with one coat primer and approved hade with cost of weather seal coat and labour etc. complete

1st Floor

Priming one coat with any approved primer including cost of primer over iron work etc. complete.

Head Room

R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.

Column & Beam

Roof slab

Dismetalling and removing brick masonry upto 3m height including stacking useful materials for reuse etc.complete as per direction of the Engineer-in-charge.

Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge.

Flyash.brick masonary in C.M.(1:6) in Super Structure with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.

Head Room(2nd floor)

16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

Head Room(2nd floor)

12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

12mm thick C.P(1st floor)

6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

Head Room(2nd floor)

Priming 1 coat with wall primer water bond cement primer includingcost, conveyance and taxes of all materials etc.complete as per direction of the Engineer-in-charge.(G.Floor)

Industrial floor tiles( 1st floor)

Supplying, fitting and fixing industrial floor tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required

Painting two coats over a one coat of primer work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.

25mm thick grading Plaster(1st floor)

Finishing wall surfce with acrylic wall putty (water based) of approved make a finished smooth and even surface to receive painting including cost of all materials taxes labour T&P etc complete.

25mm thick grading Plaster(1st floor)

Finishing walls withone coat primer & two coat plastic emulsion paints with any approved shade of paints and labour etc. complete.

25mm thick grading Plaster(1st floor)

Weather seal coat two coats with one coat primer and approved hade with cost of weather seal coat and labour etc. complete

25mm thick grading Plaster(1st floor)

Priming one coat with any approved primer including cost of primer over iron work etc. complete.(G.Floor)

Wiring

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/KEI/ Greatwhite/Polycab) (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

-do- Group A

-do- Group B

-do- Group C

Recessed wiring to Fan Point in...

-do- Group B

-do- Group C

Recessed wiring to Call Bell Point in...

-do- Group C

Recessed wiring to Exhaust Fan Point in…..

-do- Group C

S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

S/F of Angle holder replacing Ceilling Rose (Make : Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

Switch Boards

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC&Gyser. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti)

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection. (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T)

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.

2 Modular box with base & cover

4 Modular box with base & cover

6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Sub-Main

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/ KEI/ Greatwhite/ Polycab)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

Circuit Breakers

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

S/F of MCB 12 way Single door (2.3.3)

Main Switch

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

Earthing

S/F of G.I.Earth Plate Earthing 600 mm x600mmx6mm with Salt & Charcoal for Earth electrode (3:4)+(3.6)

S/L of 25mm x 6mm G.I. earth strip in ground(3:10)

Fitting

Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)

Supply and fixing of 225mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delux R/ Orient-Power Flow DBB/ Pollycab -Fresh on DBB )

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections ( Make- Crompton/ HPL/ Polycab/ Havells/ / Panasonic/ RR/Crompton )

SITC of 1200mm Sweep BLDC Ceiling Fan with Aluminium Blades having watage not more than 28 watt & Air Deleivery ≥ 215m3/min. (Replacement warranty will be 4 years) (Make:Usha-Techinix /Crompton- Energion Groove/Havells-Efficiencia Neo)

S/F step type modular fan regulator

Supply and fixing of 30-35 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient )

Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient )

S/F of 10w Watt LED Bulb (Make- Crompton/ Phillips/ Havells/ Panasonic)

S/F of 15w Watt LED Bulb (Make- Crompton/ Phillips/ Havells/ Panasonic)

S/F of 1.5T 3Star split type AC Machine, (Make-Carrier/Voltas/Hitachi)

S/F of 5KVA Automatic Voltage Stabilizer(130-300V), (Make-Microtech/V-Guard/ Shakti)

Cables

Provision of Armoured cable size 2x6sqmm (15) Make: Gloster/ KEI/ Finolex/ Anchor/ Havells/ V-Guard/ HPL/ L&T/ Greatwhite/ Pollycab)

PH Works

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. (a) 1st depth-

2nd depth-

Supplying all materials,labour,T&P and filling in F&p with river sand well watered and rammed including conveyance

of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour, T&P and providing PCC(1:1.5:3) with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8%in cm(1:4) including watering, curring, conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. 4.759sqm

Supplying all materials, labour, T&P and providing MS reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour,T&P and providing RCC (1:1:5:3) with 12mm size HG chips for RCC works including hoisting, laying, watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

1x3.05m x 1.85m x 0.10 m =0.564 cum

Supplying all materials,labour,T&P and providing 12mm thick CP(1:3)on brick work with punning for skirting including watering,curing,conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing CC(1:2:4)with 12mm size and HBG chips including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/chequered tile in floors, treads and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the specification and direction of E.I.C. .

Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kota tiles/ kodappa tiles on 12mm thick CP(1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of EIC.

Supplying all materials,labour,T&P and providing cement flush pointing (1:3)to brick masonry including watering, curing, conveyance of all materialsto worksite payment of royalty taxes etc all complete as per specification and direction of E.I.C.

Supplying all labour T&P and making m.s step iron in 20mm dia m.s steel bar and fixing into walls of MH/ Septic tank dullyembedded as per direction of E.I.C.

Supplying all labour T&P and providing 50mm thick pre cast RCC baffle walls in cc(1:1.5:3)with 12mm size bhg chips fitted and fixed in position and finished smooth etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast MH cover in cc (1:1.5 :3) using 12mm size hbg chips, placing the cover on the MH/S.Tank & finishing smooth etc all complete including watering, curing, conveyance of all materials to worksite, payment of royalty,taxes etc all complete as per the specification and direction of E.I.C.

Supplying all materials,labour,T&P and providing, fitting and fixing of 110mm dia PVC Tee in wall of S.Tank including filling the recess with cc(1:1.5:3)with 12mm size BHG chips including watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the direction of E.I.C.

Filling in F&P with excavated materials,including watering and ramming as per the direction of the E.I.C.

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/ Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C

Supplying all materials,labour,T&P and fitting & fixing of U-PVC SWR soil waste ventilating pipes & fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. (a) 110mm dia PVC pipe

110mm dia PVC'P' trap

110mm dia.PVC D/J/D

110mm dia.PVC S/J/D

110mm dia.PVC H.R.Bend

110mm dia.PVC Door Bend

110mm dia PVC Plain Bend

110mm dia PVC offset

110mm dia PVC Cowl

125mm dia CP greatings

Supplying all materials,labour,T&P

and cutting holes through brick/stone masonry walls for taking PVC pipes and fittings including making good the damages etc. all complete as per the P.H. specification and direction of E.I.C. (a) 250mm to 375mm thick wall

Roof cutting

Supplying all materials,labour,T&P for fixings water closet, squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 580mm Orissa Pan(White)

Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent)

Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. (Hindware/Parryware/Cera/Equivalent)

Supplying all materials,labour,T&P and fixing wash basin of ISI mark of with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C . (Hindware/Parryware/Cera/Equivalent) (a) 550mmx400mm size WHB

Pedestrial for WHB

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 600x450x250 mm stainless steel kitchen sink (Good Quality)

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (A) Gully Trap Chamber (0.25 x 0.25 inside Size)

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3: 6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6), moulding & shapping the channel inside&benching with cc(1:1.5:3)using 12mm size HG chips,12mm thick cp(1:3) with punning to inside, cement flush pointing(1:3)to outside,RCC coverslab in cc(1;1.5:3) using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C. Size (760mmx760mmx460mm)

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches(to level or slope) and jointing with supply of approved rubber lubricant by nonheat application method using 40mm bhg metals on bed of the trenchand hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc.and testing all complete as per approved drawing,design,specification and direction of E.I.C. (A)110mm dia PVC pipe with allround encasing

110mm dia PVC pipe with Hunch Top encasing

Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brickwork in cm(1:6)for the remaining height at top, 12mm thick CP(1:4)inside and outside over masonary brickwork gravel packing in the rear of well steining, RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron wirk, watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc. all complete as per approved drawing,specification and direction of E.I.C. (a) 1.20m dia x 2.00m deep Inside Size

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. (a) 1.20m dia x 1.80m deep RCC Ring Soak Pit

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 2000 lits capacity on the roof of ground floor

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 2000 lits capacity on the roof of ground floor

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a) 20mm dia C-PVC PVC Pipe (Internal)

25mm dia (ASTM )PVC Pipe

15mm dia PVC inlet Connection Pipe

32mm dia PVC Waste Pipe

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. a)upto 300mm wide

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C. (Plaza/Amber).

15mm dia C.P Bib Cock(L.B)

15mm dia C.P Bib cock(S.B)

15mm dia C.P Twin Bib cock

15mm dia C.P Health Fuccet

15mm dia C.P Pillar cock

15mm dia Angle Stop Cock

15mm dia CP Wall Mixture (2-in-1)

15mm dia CP Flange

15mm dia CP Extension Piece

25mm dia PVC Ball valve

Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC low level flushing cistern with a pair of C.I/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction

of the E.I.C. (Hindware/Parryware/Cera/Equivalent) (a) 10 lit PVC L/L Cistern

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size (fixed type)

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.

Glass self

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C. (a) 20mmx450mm long CP towel rail

CP towel ring

Supplying all materials,labour,T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C. (a) 15mmx100mmlong

125x100mm dia Tube Well through ODEX Method

Supplying all labour and drilling perfectly vertical bore holes in boulder formation areas with down the hole hammer drilling rigs or combination drilling rigs to suit the site condition with deployment of rig, necessary accessories and consumables for a specified depth below ground level including supply of necessary casing shoe, odex tools and plants jointing materials, extra sockets where rquired withdrawing of pipes, lowering the M.S (ERW) pipes and fitting and fixing in perfectly vertical position including cutting and welding for jointing pipes for simultaneous casing lowering in over burden boulder formation till encounter of hard rock and to drill 125mm DTH upto the desired depth as may be necessary, clearing the site and washing bore etc., all complete providing sanitary sealing upto 5 meters depth below gound level as per the direction of Engineer-in-charge.a) Labour for drilling of 125mm dia bore-

Cost of ERW Pipe

Labour for drilling a perfectly vertical bore hole of 100 mm dia for a specified depth below boulder zone through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consuambles etc.

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well ibncluding supply and use of all necessary equipment and labour as per the direction of engineer-in-charge.

1.00H.P.Single Phase Submersible Pump Set Supplying of I.S.I.Mark 1.00H.P.Single Phase Verical Submersible Pump Set with discharge of 1800-2200 ltr./hour and a head of 45-60mtr of reputed make like KSB/Texmo & equivalent including all cost, conveyance and taxes etc all complete as per direction of E-I-C.

Supplying all labour,T&P and fitting and fixing of 1.00H.P Single phase vetrical Submersible Pump Set with commissioning and testing etc.all complete as per direction of E.I.C.

Supplying and fitting and fixing of I.S.I.mark D.O.L Starter of reputed make like BCH or equivalent for 1.00H.P Single Phase Submersible Pump including all cost,conveyance of all taxes etc all complete as per direction of the E.I.C.