REPAIRS TO HARDSTANDING, FENCING, DRAIN AND MISC B/R ITEMS CERTAIN AREA OF MH, SUPPLY PL (ASC) AND CERTAIN LOCATION UNDER AGE B/R-II AT KAMPTEE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for 100mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for chequered tiles 300 x 300 x 25 mm thick, glossy, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished, any colour, shape and size confirming to IS 15658-2006 of 60mm thickness, with grey cement and pigment, M-35 Grade etc complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block, rubber finished any colour, shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade etc with grey cement and pigment complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggragate) as in surface channels and drains complete all as specifed and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over or under 30cm complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces with CM (1:4) finished fair and even complete all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying three coats of white wash over wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

M&L for preparation of new concrete surfaces of any description not otherwise described over 10 cm in width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Cleaning of sludge/ soil etc accumulated in existing drain and thrown away the spoil in low lying area exc 50m upto a distance of 250m complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 (reinforcement measured and paid separately) complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

All as per item No 24 above but 6 to 8 mm dia complete all as specified and directed.

Dismantling posts or sturt (wood, steel or RCC) any section, including taking out embeded portion, embeded in concrete and making good disturbed ground complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC precast fencing post, in cement concrete B-l, 1:2:4 (Nominal Mix) (using 20mm graded stone aggregate) average cross sectional area exc 100 sqcm and not exc 250 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and as directed.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work complete all as specified and directed.

Dismantling of old barbed wire of any description from RCC fencing post, complete all as specified and as directed. (Note:- Each line of wire shall be measured).

S&F galvanised two strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolt including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Dismantling fencing, wire mesh, any type complete all as specified and directed.

Supply only MS galvanised chain link fencing, any size or type including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc 10cm in width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) confirming to Fe-290 E-165 complete all as specified and directed.

M&L for 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F MS round bars 5mm dia and over, upto and including 10mm dia in stirrups, binders etc quality Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165), complete all as specified and directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not exc 10cm width or girth when unconnected with other painting or when painted in different tint & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.1,22,658.00]

DEESHA CONSTRUCTIONS

Meet Road Lines

Shri Mohan Brother

M/S L M Chourasia

M/s Jagdish Staioners and General Stores

Bidder Name

Meet Road Lines

m/s A.A brothers

M/S L M Chourasia

DEESHA CONSTRUCTIONS

Shri Mohan Brother

M/s Jagdish Staioners and General Stores