Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.0 LAccepted-AOC MINISTRY OF DEFENCE MES G | L1 | Accepted-AOC AWARDED | |
| 2 | L2₹49.8 L+₹1.5 L (3.06%)Rejected-AOC 26 3 BOMBAY PUNE ROAD LAXMI APARTMENT OPP BU BHANDARI SHOWROOM PUNE 411003 | PUNE | MAHARASHTRA | 411003 | L2 | Rejected-AOC SECOND LOWEST BIDDER (L2) | |
| 3 | L3₹51.9 L+₹3.6 L (7.47%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-AOC THIRD LOWEST BIDDER (L3) | |
| 4 | L4₹54.2 L+₹5.9 L (12.2%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L4 | Rejected-AOC FOURTH LOWEST BIDDER (L4) | |
| 5 | L5₹54.8 L+₹6.5 L (13.4%)Rejected-AOC PASHAN PUNE | L5 | Rejected-AOC FIFTH LOWEST BIDDER (L5) |
Tender Value
Refer Docs
EMD Value
₹98,000
Closing Date
24 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
PROVISION OF CERTAIN REVENUE AND MINOR WORKS AT ARDE UNDER AOR OF GERD PASHAN
2023_MES_623558_1
GERD/PSN/TOKEN/34 OF 2023-2024
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹98,000
Yes
23 Dec 2023
16 Oct 2023
27 Nov 2023
16 Oct 2023
24 Nov 2023
30 Oct 2023
16 Oct 2023 - 23 Oct 2023
Amount
Excavation in over areas not exc 1.5 metre deep and getting out in any of type soil complete all as specified and directed.
Returing filling in including spreading leveling watering well ramming in layers n;exc 25cm thick with soil obtained from excavation complete all as specified and directed.
Removing excavated material n.exc. 50 metre and depositing where directed complete all as specified and directed.
Providing and laying in position cement concrete1:4:8 Type D2, using 40mm graded stone aggregate complete all as specified and directed.
Providing and laying in position cement concrete 1:2:4 type B1, using 20mm graded stone aggregate complete all as specified and directed.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 meter in width as well as 10 sqm on plan including getting out all kinds of soil and disposal of excavated earth upto 50 meter and lift upto 1.5 meter, complete all as specified and directed by Engineer-in- Charge.
Material and labour for brick work with fly ash brick straight or curved or plan exc 6metre mean radius built in CM 1:6 complete all as specified and directed.
Material and labour for 12mm thick cement plaster in cm(1:6) on fair faces of brick work or concrete surfaces complete all as specified and directed.
Material and Labour for 18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster 1:6 finished with a top layer 6 mm thick cement plaster 1:4 using water proofing compound (WPC shall be measured and paid separately) complete all as specified and directed.
Supply only waterproofing compound complete all as specified and directed.
Providing and laying cement concrete 1:2:4 type B1, using 20mm graded stone aggregate in coping (any thickness) up to floor five level, including centering, shuttering and finishing complete all as specified and directed.
Supply and fix hot finished welded type tubes steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete all as specified and directed.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed.
Material and Labour for painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two coats on new work on steel surfaces complete all as specified and directed.
Material and Labour for applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface and applying water proofing cement paint of required shade (Two coats applied @ 3.84 kg/10 sqm) on newly plastered surfaces of wall complete all as specified and as directed.
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of crushed stone sand/ M-sand, filling the joints complete all as per the direction of Engineer-in-charge
Demolishing cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250meter and not exceeding 500meter from the site complete all as specified and directed.
Material and Labour for PCC 1:2:4 (Type B0 using 12.5 mm graded aggregate) as in levelling course average thick 40 mm, to match the undulations of roof complete all as specified and directed.
Material and labour for rendering 10 mm thick on fair faces of concrete surface in cement mortar 1:3 for receive the roof finishes with water proofing liquid. (WPL Shall be measured and paid separately) complete all as specified and directed.
Material and Labour for mechanical cleaning of surface to make it free from any bituminous residue/ dirt, oil , grease or similar material. Thereafter crack treatment by cutting open cracks and cleaning based sealant including application of Pu based primer complete all as specified and directed by Garrison Engineer/Engr-in-Charge.
Material and Labour for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of epoxy primer @ 0.15 Kg per Sqm followed by two coats of polyurethane coating with 1.5 Kg per sqm in two coats etc complete as per manufacturer specification and complete all as specified and directed by Garrison Engineer/Engr-in-Charge Notes : Properties of Polyurethane based chemical shall confirm to following Technical Parameters:- (i) Highly Elastic and shall have crack bridging ability of upto 3mm as per AS NZ 4548 (ii) UV Resistance. (iii) Adhesion to concrete and shall resist 7 bars of hydrostatic pressure. (iv) Tensile strength should not less than 2.0 N/sq.mm for free film & 60 % solid content as per ASTM C 1250 (v) Elongation should not less than 300% as per ASTM D2370 (vi) Solid content by weight should not less than 60%. (vii) Air/water permeability BSEN 12390 AT 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm. (viii) Accelerated weathering (ASTM453) should Pass 1000 hours. (ix) Reaction to fire – non inflammable. 2. The work shall be executed through authorise applicator of manufacturer only. Contractor has to provide manufacturer test certificates for the above mentioned technical parameters and PVs 3. The contractor has to submit the guarantee for 10 Years against the water proofing treatment. Make:- Asian ,Bostic, Berger,Fosroc, sika
Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed.
Supply and fix Aluminium powder coated sliding windows three track consists of 03 Nos of shutters i.e 02 Nos of Glazed shutters and 01 No of gauzed shutter with size of sections of styles and rails all as directed by Engineer-in-Charge NOTE :- (i) All aluminium section including galzing clips, snap beading, joining cleats, rubber packing screws etc as required are deemed to be including in the rate quoted. (ii) Thickness of powder coating minimum 50 micron. (iii) Glass & wire cloth shall be measured and paid separately under respective items.
Supply and fix Sheet glass 4.80mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed to window shutter complete all as specified and directed.
Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
Supply and Fix Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed.
Supply and Fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed
Supply and Fix 100x75mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.
Supply and Fix 100x10 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply and Fix extruded Aluminium alloy handles, fabricated type anodised size 100 mm complete all as specified and directed.
Supply and fix Pressed steel door frames (mild steel sheet 1.60 mm) Profile "B" of size 105X60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 35mm thick of required size comprising of virgin polymer of K value 58 to 60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed.
Providing and fixing 35 mm thick shutters wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, complete all as specified and directed of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately)
Material and Labour for Painting with synthetic enamel paint on wooden surfaces of approved brand and manufacture of required colour to give an even shade two coats on new work over an under coat of suitable shade with ordinary paint including ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre of approved brand and manufacture complete all as specified and directed.
Supply and Fix 150 mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and Fix 125 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.
Supply and Fix 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed.
Providing and fixing aluminium hanging floor door stopper 100mm size (Twin rubber stopper ) ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed.
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. complete all as specified and directed.
Providing and fixing aluminium work for frames, doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be Powder coated (minimum thickness of powder coating 50 micron) smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and complete all as specified and directed by Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge
Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed of Engineer-in-charge
Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolishing cement concrete 1:4:8 or leaner mix equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed of Engineer - in - charge.
Material and Labour for Cement concrete 1:2:4 type B1, using 20mm graded stone aggregate in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete all as specified and directed.
Material and labour for Chequerred precast cement concrete tiles 22 mm thick light shade with pigment using white cement in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on and including 20 mm thick bed of cement mortar 1:4 complete all as specified and directed.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and directed.
Dismantling roofing asbestos cement sheet including ridges, hips, valleys and gutters etc. and stacking the material within 50 Metres. complete all as specified and directed.
Material and Labour for cement concrete pavement with 1:2:4 Type B1, using 20 mm nominal size stone aggregate including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants including finishing complete all as per direction of Engineer-in-charge. Note : Joint filling shall be measured and paid separately.
Providing and filling in position rubberized bitumen hot sealing compound using grade 'A' sealing compound conforming to IS: 1834 for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.
Supply and Fix Structural mild steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position complete all as specified and directed.
Providing and fixing brass curtain rods 20mm dia and thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete all as specified and directed.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed.
Material and labour for wall painting with plastic emulsion paint two coats on old work of approved brand and manufacture to give even shade complete all as specified and directed.
Material and labour for Distempering on old work two coats with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade. Complete all as specified and directed.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.
Providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, moulding and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Dismantling of false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead complete all as specified and directed by Engineer-in-charge.
Providing and Fixing Suspended Ceiling System with 15mm thick Armstrong Thermatex Feinstratos Micro complete ceiling tiles with silhouette 15 mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95% NRC 0.85-0.95 (Average value of Absorpiton Co-efficient readings taken at 250 Hz, 500Hz, 1000 Hz and 2000Hz) as per ASTM C423 standard, Light Reflectance > 85% as per ASTM E-1477, Colour white fire performance of class 0/1 as per BS 476 Part 6/7 with 20/25mm Microlook 90° edge and 8mm drop in module size of 600 mm x 600 mm. It shall be suitable for Green Building application, with Recycled content of up to 40% complete all as specified and directed.
Supply and fix in repair Stainless steel kitchen sink - without drain board 610 x 510 mm bowl depth 200 mm complete all as specified and directed.
Demolishing cement concrete manually/ by mechanical means including disposal of material out of MoD land complete all as specified and directed of Engineer - in - charge.
Material and Labour for Kota stone slab flooring over 20 mm thick bedding layer in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete complete all as specified and directed.
Material and labour for Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 10 mm thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and directed.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 Metres lead completeall as specified and directed.
Material and labour for Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two coats) over and including water thinnable priming coat with cement primer complete all as specified and directed.
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead completeall as specified and directed by Engineer - in- charge.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc fixed to steel window including priming coat with approved steel primer all complete all as specified and directed.
Providing and fixing ISI marked flush door shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and directed.
Providing and fixing pre-laminated with decorative lamination on both side exterior Grade-I of MDF Board 12 mm thick confirming to IS:14587 complete all as specified and directed.
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate with stainless steel cover plate minimum 1.25 mm thickness etc. complete as per the direction of Engineer-in-charge.
Providing and fixing angle iron frames for doors, windows and ventilators to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, complete all as specified and directed of Engineer-In-charge.
Providing and laying in position PCC 1:2:4 type B0 using graded stone aggregate 12.5 mm nominal size complete all as specified and directed.
Providing and laying double charged Vitrified tiles of size 600mm x 600mm in floor 8 to 9 mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. complete all as specified and directed.
Providing and laying Vitrified tiles in different sizes 8 to 9 mm thick with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed.
Providing and fixing chromium plated brass butt hinges of size 100 x 70 x 4 mm (ordinary type) with necessary chromium plated brass screws etc. complete including necessary screws complete all as specified and directed.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and directed.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed.
Providing gola 75x75 mm in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate, including finishing with cement mortar 1:3 as per standard design of size 75x75 mm deep chase complete all as specified and directed.
Providing and laying in position cement concrete 1:3:6 type C1, using 20mm graded stone aggregate complete all as specified and directed.
Providing and laying 1000 mm dia RCC pipes. (Laying by manual/ machanical means) Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc. complete all as specified and directed.
Material and labour for Making plinth protection 50mm thick of cement concrete 1:3:6 type C1 using stone aggregate 20 mm nominal size including 75mm thick bed of dry brick ballast 40 mmnominal size, well rammed and consolidated and grouted with fine sand,including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed.
Providing and fixing precoated ridges plain (500 to 600mm) galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling/ self tapping screws complete all as specified and directed.
Taking down copper/aluminimum point wiring (Light, fan, socket or power Point) complete including fixture and fittings such as swithches, ceiling rose, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good disturbed surfaces for walls, floors etccomplete all as specified and directed.
Taking down sub main wiring of any size including PVC conduit/casing caping complete and making good the disturbed surfaces complete all as specified and directed.
Taking down main switches & DBs etc and making good to the disturbed surfaces all as directed by Engineer-in-Charge.
Material and Labour for wiring with 1.5 Sqmm size PVC insulated and unsheathed 1100 volts grade single core multistrand FRLS copper conductor cable drawn through concealed in wall including PVC conduit of suitable size but not less than 19mm with all fittings and accessories for mounting fitings like switches, sockets and fan regulator etc including one continous run of PVC insulated green colour 1.5 Sqmm multi standed FRLS copper conductor cable earth wire complete all as specified and directed for the following (a) One light point controlled by one : one way switch
(b) One Fan/Exhaust point controlled by one : One way switch
(c) One 3 pin 5 Amp socket out let controlled by one switch on indep board.
(d) One 3 pin 5 Amp socket out let controlled by one switch on same board.
All as per item No 91 here-in-before but using 2.5 sqmm standed copper conductor cabel PVC insulated drawn with 2.5 sqmm standed copper conductor cable PVC insulated as continued earth wire.
Supply and Fixing ceiling rose, surface bakelite, 3 terminals, 65 x 50 mm complete all as specified and directed
Supply and Fixing for stepped type electronic fan regulaor flush type on the new phenolic sheet etc required at site complete all as specified and directed.
Supply and Fix LED edge lit luminaire suitable for recess mounting 2 x2 36 watt with polycarbonate housing integrated electronic dirver complete at any height with all accessories including internally prewired complete all specified and as direded. Make Havells Cat No VENUSNEOHE 2X 2 PLR36 WLED857G2 or techno commercial equivalent in Philips/Crompton/Wipro.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation : B, 3 nos blades, 30 cm long down rod, 2 nos, canopies, shackel kit, safety rope, copper winding, power factor not less than 0.9, Service Valud (CM/M/W) minimum 6.00 Air delivery minimum 210 Cum/Min, 350RPM (Tolerance as per IS :274-2019), THD less that 10% electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise =75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230V, 50HZ single phase AC Supply, earthing etc complete all specified and as directed.
Material and Labour for sub main wiring complete with 2 single core cable 6 sqmm PVC insulated FRLS stranded copper conductor cable 100 Volts grade drawn through PVC conduit with one run of PVC insulated FRLS cable 6 sqmm copper conductor cable (green in colour) for earth continuity conductor connected to main earth dolly complete all specified and as directed.
Supply and fix MCB DB, double door, 4 way, TPN with 200 Amp rated busbar, 415V complete all specified and as directed.
Supply and Fix MCB triple pole and nuetral 415 volts, 32 to 63 Amps, rupturing capacity 10KA of C Curve characteristics with separate termination provision of cable and busbar both and DIN facility at both ends complete all as specified and directed.
Supply and Fix MCB, SP, 6 to 32 Ampire of C curve characteristic with separate termination provision of cable and busbar both and DIN facility at both ends complete all specified and as directed.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 25/ 32 Amp metal enclosed industrial type complete all as specified and directed.
Supply and fix LED edge lit Luminaire suitable for recess mounting 2'x2', 36 Watt with polycarbonate housing integrated electronic driver complete at any height with all accessories including internally prewired all as specified and as directed. Make : Havells Cat No VENUSNEO2'X2'PLR36WLED857G2 or equivalent in Philips/Crompton/Wipro
Supply & fix MCB DB, double door, 8 way, TPN with 200 Amp rated busbar, 415 V complete all as specified and directed.
Material and labour for Submain wiring alongwith earth wire with FRLS PVC insulated copper conductor, singlecore cable in concealed medium class suitable size of PVC conduit as required 4 X 10 sq. mm+ 2 X 10 sq. mm earth wire complete all as specified and directed.
Material and labour for Submain wiring with 2 run of single core 4 sq mm PVC insulated unsheathed cable 1100 volt grade with multistranded copper conductor drawn concealed in wall into PVC conduit of suitable size including cutting chasses with all fittings and accessories fixed on walls/roofs/floors,etc and including provision of one run of 4 Sq mm PVC insulated copper wire as earth continuity conductor to the common earth doly complete all as specified and directed.
Providing and laying and compaction of stone Aggregate (Single size) : 40 mm nominal size complete as per direction of Engineer -in-charge.
Providing and laying damp-proof course 40 mm thick with cement concerete 1:2:4 type B0 using 12.5mm graded stone aggregate complete all as specified and directed.
Providing and fixing Aluminium shutters of doors, inclding providing and fixing hinges/pivots including the cost of EPDM rubber/neoprene gasket required.
Providing and fixing glazing in aluminium door, window ventilator shutters and partitions etc with EPDM rubber/ neoprene gasket etc with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) as per directions of engineer-in-charge.
Taking out doors, windows and clerestory window shutters (steel or woood) of area 3squre metres and below including stacking within 50 meteres lead complete all as specified and directed.
M/S NILESH BUILDERS
S.K.HARAL
AJAY ENTERPRISES
Rays Breakers
M/s S.R lahoti
M/S SAMRUDHI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .