REPAIR/RENEWAL OF WOODEN AND STEEL FURNITURE AT HQ 10 SECT RR AND 29 RR BN (PATTAN) UNDER AGE (I) CIF (K)

Amount

Repairing of old unsv/broken parts of Charpoy GI pipe plytop and S&F/M&L follwing new parts/work all as per drgs and specified or directed by Engr-in-Charge. (Drawing No-FD-220/FD/MAP-II/01)

Removing of old unsv/broken plywood from Charpoy GI pipe, S&F new 12mm thick commercial plywood BWR Grade (ISI Marked) over exisiting Charpoy GI plytop and tight with 12 Nos new screws after necessery welding work of existing stiffners wherever required duly completed alongwith fwg repair work shown all as per drgs and directed by Engr-in-charge.

Removing old unsv/broken GI long rails from charpoy, S&F new size long rails of 32mm GI pipe medium grade, ISI marked duly new threaded on both sides including two nos 32mm GI check nuts all as per drgs.

Removing unsv/broken short rails of charpoy GI, cutting and fixing short rail from retrived old long rails as per ser No 1.02 above, duly threaded both ends complete all as per drgs.

Removing old broken legs of charpoy GI, cutting and fixing legs from retrived old long & short rails as per item ser No 1.02 & 1.03 above duly threaded one end with fixing of hardwood plug at bottom of leg all as per drgs.

Removing unsv/broken elbow of charpoy GI, S&F new GI Elbow 32mm dia 03 way, ISI marked all as per drgs.

Repair of old unsv/broken parts of Bed Plytop (1980x900mm)/IP and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (Drawing No-FD-246/ FD/06/MAP/08(R))

Removing old unsv/broken ply top from bed plywood/IP, S&F new 12mm th commercial plywood BWR grade, ISI marked over existing bed duly completed alongwith fwg works all as per drgs.

Removing old unsv/broken head rest from bed ply, S&F new head rest made out of 4mm teak ply facing both side alongwith 22 mm thick hard wood batten with 12mm half cut teakwood beading duly french polished complete with fwd works all as per drgs.

All as per item No 2.02 above but foot rest.

Removing old unsv/broken long rail from bed, S&F new long rail frame of 35x90mm made out of 1st class teakwood duly french polished all as per drgs.

All as per item No 2.04 above but short rail.

All as per item No 2.04 above but stiffners (40x60mm) to support plywood.

All as per item No 2.04 above but legs made out of 400x60x60mm size all as per drgs.

Repairing old unsv/broken parts of CHAIR DINING and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-228/279)

Removing old unsv/broken plastic cane from chair dining, S&F new plastic cane of 2mm size and canning (Godrej pattern) to chair seat alongwith new wooden member screwed to side frames for canning on each side, duly completed all alongwith fwg repair/polish work. S&F new 4 nos hard rubber ring duly screwed at bottom of leg all as per drgs.

Removing old unsv/Broken rear legs from chair dining, S&F of new legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per item No 3.02 above but front leg.

All as per item No 3.02 above but back rail.

All as per item No 3.02 above but front rail.

All as per item No 3.02 above but side rail.

All as per item No 3.02 above but stiffener.

Removing old unsv/broken parts of CHAIR EASY and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-229/281)

Removing old unsv/broken plastic cane from chair easy, S&F new plastic cane of 2mm size and canning (Godrej pattern) to chair seat & back alongwith new wooden member screwed to side frames for canning on each side, duly completed all alongwith fwg repair/polished work. S&F new 4 nos hard rubber ring duly screwed at bottom of leg all as per drgs.

Removing old unsv/broken rear legs from chair easy, S&F of new rear legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per ser item No 4.02 above but front legs.

All as per ser item No 4.02 above but front frame.

All as per ser item No 4.02 above but back frame.

All as per ser item No 4.02 above but side frame.

All as per ser item No 4.02 above but arms.

CHAIR VERANDAH :- Removing old unsv/broken cane of chair verandah, S&F two coat of White synthetic enamel paint after welding work wherever required duly cleaning of iron surface. Supply & canning to complete chair (seat & back) with 2mm cane nylon/plastic in mat pattern. S&F 04 Nos hard rubber toe/shoe of 3mm size in bottom of legs all as per drgs. (DRAWING NO. FD-359)

Removing old unsv/broken parts of CHAIR WRITING and S&F/M&L following new part/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-280)

Removing old unsv/broken plastic cane from chair writing, S&F new plastic cane of 2mm size and canning (Godrej pattern) to chair seat alongwith new wooden member screwed to side frames for canning on each side, complete alongwith fwg necessary repair/polished work. S&F new 04 hard rubber ring duly screwed at bottom of leg all as per drgs.

Removing old unsv/broken Rear legs from chair writing and S&F of new rear legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per ser item No 6.02 above but front leg.

All as per ser item No 6.02 above but front rail.

All as per ser item No 6.02 above but back rail.

All as per ser item No 6.02 above but side rail.

All as per ser item No 6.02 above but stiffener.

All as per ser item No 6.02 above but arm.

Repair to old unsv/broken parts of CHAIR WB WITHOUT ARM and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge: -(DRAWING NO. FD-58/285)

Removing old unsv/broken seat from chair WB, S&F of new seat made out of 6mm thick commercial plywood ISI marked with 6mm perforation & fixed with screws complete surface alongwith fwd works all as per drgs.

Removing old unsv/broken rear leg from chair, S&F of new leg made out of 1st class teakwood duly french polished till gloosy shining with hard rubber right at bottom of legs complete surface all as per drgs.

All as per item No 7.02 above but front leg.

All as per item No 7.02 above but front rail.

All as per item No 7.02 above but back rail.

All as per item No 7.02 above but side rail.

All as per item No 7.02 above but top support between rear leg.

All as per item No 7.02 above but stiffener.

Removing of old unsv/broken parts of SOFA (SINGLE SEAT) and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge . (DRAWING NO. FD-281/373).

Removing old unsv/broken front leg of existing sofa single seater, S&F of new Front legs made of 1st class hard teakwood duly polished incl new Nylon buffers at bottom of legs, size and shape all as per drgs.

All as per ser item No 8.01 above but rear leg.

All as per ser item No 8.01 above but Front rail.

All as per ser item No 8.01 above but back rail.

All as per ser item No 8.01 above but back top frame.

All as per ser item No 8.01 above but Arm rest.

All as per ser item No 8.01 above but Side rail.

All as per ser item No 8.01 above but Seat/Back batten/bearers.

Takingout old unsv covered cushion of sofa, S&F new 100mm thick cushion 520x560mm (cool foam branded), 32mm density covered with best quality tapestry cloth (with zip covered). Colour shall be used after approval of Engr-in-Charge all as per drg.

Removing of old unsv/broken parts of SOFA (THREE SEATER) and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-281/373).

Removing old unsv/broken front leg of existing sofa 3 seater (single piece), S&F of new Front legs made of 1st class hard teakwood duly polished incl new Nylon buffers at bottom of legs, size and shape all as per drgs.

All as per ser item No 9.01 above but rear leg.

All as per ser item No 9.01 above but Front rails.

All as per ser item No 9.01 above but back rails.

All as per ser item No 9.01 above but back top frame.

All as per ser item No 9.01 above but Arm rest.

All as per ser item No 9.01 above but Side rails.

All as per ser item No 9.01 above but Seat/Back batten/bearers.

Takingout old unsv covered cushion of sofa, S&F new 100mm thick cushion 520x560mm (cool foam branded), 32mm density covered with best quality tapestry cloth (with zip covered). Colour shall be used after approval of Engr-in-Charge all as per drg.

Removing old unsv/broken parts of TABLE 3'x2' with/without drawer and S&F/M&L the following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-283/284)

Removing old unsv/broken table top, S&F new top of 18/19mm thick MDF/pre-laminated particle board of one side teak face exterior grade, ISI marked screwed so long from top rail including 04 mm thick 1st class teak wood beading duly french polished alongwith fwg works. S&F 4 nos new hard rubber ring screwed at bottotm of legs complete all as per drgs.

Removing old unsv/broken legs from table, S&F of new legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per ser item No 10.02 above but Long rail.

All as per ser item No 10.02 above but short rail.

All as per ser item No 10.02 above but stiffner.

All as per ser item No 10.02 above but Drawers with decorative knob.

Repair to old unsv/brocken parts of SLEEPING PLATEFORM WOODEN and S&F/M&L the following new parts/work all as per drawing and specified .

Removing old unsv/brocken wooden planks (900x150x25mm) size from sleeping plateform, S&F new wooden planks made out of 1st class hard Teak wood clean sawn, duly french polished complete all as per drg.

All as per ser item No 11.01 above but side long rail.

All as per ser item No 11.01 above but short rail

All as per ser item No 11.01 above but legs

All as per ser item No 11.01 above but stiffner.

Removing old unsv/broken parts of TABLE BED SIDE and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-276)

Removing old unsv/broken top of table bed side, S&F new top made out of 18/19mm th MDF/prelaminated particle board of teak veneered outside with 4mm th teak wood edging alround duly french polished alongwith fwg works all as per drgs.

All as per ser item No 12.01 above but sides support of table all as per drg.

Removing old unsv/broken shelves of table bed side, S&F new shelves made out of 12mm thick med density fiber board/particle board with teak veneered top ISI marked complete all as per drgs.

Removing old unsv/broken back side ply wood of table bed side, S&F new back side made out of 6mm thick ply wood commercial ISI marked complete all as per drgs.

Removing old unsv/broken parts of TABLE CENTRE and S&F/M&L the following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-235/274)

Removing old unsv/broken top of table Centre, S&F new top made out of 18/19mm th MDF/prelaminated particle board exterior grade of teak veneered outside screwed so long from top rail alongwith 4mm thick teakwood edging alround of top complete alongwith fwg works all as per drgs.

Removing old unsv/broken top long rail of table centre, S&F new long rail made of 1st class hard teak wood duly french polished incl new Hard Nylon rings/buffers at bottom of legs complete all as per drgs.

All as per ser item No 13.02 above but top short rails.

All as per ser item No 13.02 above but bottom side rails.

All as per ser item No 13.02 above but legs.

All as per ser item No 13.02 above but top centre stiffner.

M&L for preparing old steel surfaces scraping with sand paper of rusted portion of following furniture items and applying one coat of synthetic enamel paint (OG/Black) inside and outside all as per drg, specified and directed by Engr-In-Charge.

Almirah med steel (Drawing No. FD 1032)

Locker bed side steel (Drawing No. FD 1029)

Table office clk steel (Drawing No. FD-84/1004)

Table officer steel (Drawing No. FD-84/1003)

Repair old unsv/broken parts of TABLE DINNING 6 PERSON (1500x900x760mm) and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO.FD-239/ 269/273 /376)

Removing old unsv/broken top of table dining 6 persons, S&F of new top made out of 18/19mm MDF/pre-laminated particle board, exterior grade including 6mm th TW lipping alround duly polished complerte alongwith fwg work all as per drgs.

Removing old unsv/broken legs of table dining, S&F new legs made out of 1st class teak wood with MS right angle screwed with rail & leg for extra strength duly french polished incl new Hard Nylon buffers screwed at bottom of legs complete all as per drgs.

All as per ser item No 15.02 above but long rail.

All as per ser item No 15.02 above but short side rail.

All as per ser item No 15.02 above but stiffner.

Repair old unsv/broken parts of TABLE DINNING 8 PERSON (1800x900x760mm) and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO.FD-239/ 269/273 /376)

Removing old unsv/broken top of table dining 8 persons, S&F of new top made out of 18/19mm MDF/pre-laminated particle board, exterior grade including 6mm th TW lipping alround duly polished complete alongwith fwg work all as per drgs.

Removing old unsv/broken legs of table dining, S&F new legs made out of 1st class teak wood with MS right angle screwed with rail & leg for extra strength duly french polished incl new Hard Nylon buffers screwed at bottom of legs complete all as per drgs.

All as per ser item No 16.02 above but long rail.

All as per ser item No 16.02 above but short side rail.

All as per ser item No 16.02 above but stiffner.

Repair to old unsv/broken parts of TABLE OFFICE CLERK STEEL and S&F the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-84 & 1004)

Removing of old unsv/broken top of table, S&F new top made out of 18/19mm th MDF/prelaminated particle board (ext grade) ISI Marked teak veneered face with 4mm th TW beading alround with french polished complete alongwith fwg work all as per drgs.

M&L for painting of table steel with one coat of synthetic enameled OG paint after necessary welding work wherever required. S&F 04 new legs shoes at bottom of legs complete all as per drgs.

Removing of old unsv/broken drawers of table, S&F new drawers made out of 1mm TH MS sheet incl one coat of synthetic enameled OG paint over a coat of primer complete all as per drgs.

Removing of old unsv/broken locks of table, S&F new locking arrangment complete all as per drgs.

Repair to old unsv/broken parts of TABLE WRITING and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD-268/275)

Removing old unsv/broken top of table writing, S&F new top made out of 18/19mm th MDF/pre-laminated particle board one side teak face, exterior grade, ISI marked with 4mm thick 1st class TW beading alongwith fwg work all as per drgs.

Removing old unsv/broken drawer of table, S&F new drawer made of 12 th planks with bottom of 6mm th plywood, wooden bearer with new recessed handle to drawer all as per drgs.

Removing old unsv/brocken locking device & handles, S&F new locking arrangement and new recessed handle.

Removing old unsv/broken legs of table, S&F new leg made out of 1st class hard TW, duly french polished.

All as per item No 18.04 above but top front long rail.

All as per item No 18.04 above but top side short rail.

All as per item No 18.04 above but bottom large stiffener

All as per item No 18.04 above but bottom short stiffener

Repair to old unsv/broken parts of TEAPOY and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge: (DRAWING NO. FD-278/382)

Removing of old unsv/broken top of teapoy, S&F new top made out of 18/19mm th pre-laminated particle board (ext grade) ISI marked with 4mm TH 1st CL TW beading alround incl french polished alongwith fwg work all as per drgs.

Removing old unsv/broken top long rail of teapoy, S&F top long rail made out of 1st class hard teakwood, duly french polished made to shape all as per drgs.

All as per item No 19.02 above but top short rail.

All as per item No 19.02 above but legs.

All as per item No 19.02 above but stiffners.

Repair to old unsv/broken parts of TABLE DRESSING GENTS and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. F-230)

Removing old unsv/broken mirror, S&F new 5mm TH electro copper plated mirror of polished glass with 6mm TH plywood framed with 25x35mm TW batten alround with suitable key plate for hanging complete alongwith fwg work all as per drg.

Removing old unsv/broken drawer of table dressing gents, S&F new drawers made of 12mm th particle board fixed with 1.5mm plastic laminated sheet of teak face of front side of drawers with 3mm TW edging duly polished.

Removing old unsv/broken top of table, S&F new top made out of 12mm th particle board fixed with 1.5mm plastic laminated sheet of teak face with 3mm teak wood edging complete all as per drgs.

Removing old unsv knob, S&F of 25mm CP new knob of best quality complete all as per drgs.

Repair to old unsv/broken part of TABLE PEG and S&F/M&L following new parts/work all as per drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD - 236/277, 384)

Removing old unsv/broken top of table peg, S&F new top made out of 18/19mm thick MDF/pre-laminated particle board of one side teak face exterior grade, ISI marked screwed so long from top rail including 04 mm thick 1st class teak wood beading duly french polished alongwith fwg work all as per drgs.

Removing old unsv/broken legs from Peg table, S&F of new legs made out of 1st class teakwood duly french polished till gloosy shining to complete surface all as per drgs.

All as per ser item No 21.02 above but top side long rails.

All as per ser item No 21.02 above but top side short rails.

All as per ser item No 21.02 above but stiffner/bottom rails.

Repair to old unsv/broken parts of TABLE OFFICE OFFICER STEEL and S&F/M&L the following new parts/work all as per drgs drgs and specified or directed by Engr-in-Charge. (DRAWING NO. FD - 84&1004)

Removing of old unsv/broken top of table officer steel, S&F new top made out of 18/19mm pre-laminated particle board exterior grade, ISI marked including 4mm TH TW beading alround duly french polished alongwith fwg works all as per drg.

Repairing and painting of table office officer steel after necessary repair/welding works wherever required with one coat of synthetic enameled OG paint. S&F 4 Nos new legs shoes all as per drg.

Removing of old unsv/broken drawers of table, S&F new drawers made out of MS sheet 01mm thick including one coat of synthetic enamele OG paint over one coat of primer paint, size and shape shall be as per drgs.

Removing of old unsv/broken drawer's locks of table officer steel, S&F new lock of ISI marked as approved, all as specified and directed by Engr-In-Charge.

M&L for preparing old wooden surfaces by sand paper of following furniture items and applying one coat of french polish till gloosy finishing all as specified as shown on drg against each.

Bed Hard (Drawing No. FD 246)

Chair Easy (Drawing No. FD 229)

Chair Dinning (Drawing No. FD 228)

Chair Writing (Drawing No. FD 280)

Chair WB with out arms (Drawing No. FD 285)

Table Writing (Drawing No. FD 249)

Table Dinning 6/8 persons (Drawing No. FD 273)

Table 3'x2' with drawers (Drawing No. FD 283)

Table 3'x2' without drawers (Drawing No. FD 284)

Table Centre (Drawing No. FD 274)

Table Peg (Drawing No. FD 384/236/277)

Table bed side (Drawing No. FD 228)

Teapoy (Drawing No. FD 278)

Sofa (Single seat piece) (Drawing No. FD 281/373)

Sofa (3 seater, single piece) (Drawing No. FD 281/234)

Repair to old unsv /brocken parts of locker bed side steel and S&F the following new parts/work all as per drgs and specified or directed by Engr-In-Charge. (DRAWING NO. FD-1029)

Preparing steel surfaces of locker steel and applying one coat of synthetic enamel paint OG shade through spray gun to both inner and outer side after completing necessary welding, denting work including 20mm CP steel conduit pipe 1.6mm thick with socket all as directed by Engr-In-Charge.

Removing UNSV CP steel handle 100mm long and S&F new handle all as per drawing.

Removing UNSV CP hasp & staple 75x40x3mm and S&F new haspe & staple all as per drawing.

Removingold UNSV legs of locker steel, and S&F new legs made of 1mm thick black steel sheet duly one coat of primer and two coat of OG paint complete all as per drawing.

Removing old UNSV shutters of locker steel, and S&F new shutter made of 1mm thick black steel sheet duly one coat of primer and two coat of OG paint complete all as per drawing.

Repairs / Painting to almirah medium steel with shelves (DRAWING NO. FD-67/1032)

Preparation of steel surfaces, including rusted portion of almirah by scrapping with sand paper and applying one coat of synthetic enamel OG paint with spray gun on complete almirah inside and outside after completing welding, denting works wherever required. Complete all as specified and directed by Engineer-In-Charge.

Removing of old unserviceable /brocken handle of almirah including S&F new CP handle as approved by Engineer -In-Charge.

Removing of old unserviceable /brocken lock of almirah including S&F new lock as approved by Engineer -In-Charge. (Make-Godrej/Harrison/Link )

Removing of old unserviceable /brocken single shelf of almirah including S&F new shelf made out of MS sheet 1mm thick fabricated to shape and size complete all as per drawing.

Removing of old unserviceable /brocken legs of almirah including S&F new legs made out of MS sheet 1mm thick fabricated to shape and size complete all as per drawing.

Removing of old unserviceable /brocken clips for fixing of almirah including S&F new clips made out of mild steel complete all as per drawing.

Note : An amount of Rs. 4690.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S RATHER STEEL WORKS

M/S CLASSIC JK SUPPLIERS