05/PR/BSPHCL/2026

BIHAR STATE POWER HOLDING COMPANY LIMITED

NIT No. 05/PR/BSPHCL/2026

Name of Work Renovation of Kitchen, Puja room, & other misc. work in Qtr no-A/01 at BSPHCL colony, Punaichak, Patna

Estimated Cost ₹ 2,327,510.00

Cost of B.O.Q. ₹ 5,900.00

Earnest Money ₹ 47,000.00

Time of Completion 02 month

Bid Submission start date:- 04.02.2026

Bid Submission due date 18.02.2026 (upto 3:00 PM)

Date of submission of original DD:- 19.02.2026 (upto 3:00 PM)

Date of opening of Technical Part:- 19.02.2026 (upto 3:30 PM)

BILL OF QUANITITY

Sl. no. Name of work Qty Unit Rate Amount

1 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar 4.44 cum 823.70 ₹ 3,657.23

2 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum 42.51 sqm 5,662.10 ₹ 240,695.87

3 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 241.73 sqm 141.50 ₹ 34,204.80

4 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutoutsmade with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board 47.65 sqm 993.00 ₹ 47,316.45 #REF!

5 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 56.20 sqm 30.70 ₹ 1,725.34

6 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm 33.44 sqm 1,638.80 ₹ 54,801.47

7 Providing Labour for cleaning of work site and others misc. Work as per requirement of work site and as per .........E/I 10 each 556.77 ₹ 5,567.70

8 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termites' treatrnent(including the cost of chemical emulsion) Treatment of existing masonry using chemical emulsion@ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2(1 cement:2 coarse sand) to the full depth of the hole. With chlorpyriphos EC 20% with 1% concentration 113.95 M 54.00 ₹ 6,153.30

9 Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water tc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) 3.42 sqm 9,725.50 ₹ 33,261.21

10 Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) 13.73 sqm 7,074.90 ₹ 97,138.38

11 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 4.98 cum 3,998.10 ₹ 19,910.54

12 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 1.50 cum 4,688.30 ₹ 7,032.45

13 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth ) 30.49 M 178.30 ₹ 5,436.37

14 Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. 11.69 sqm 5,652.20 ₹ 66,074.22

15 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. ₹ 0.00

a Thermo-Mechanically Treated bars TMTC-500-10mm dia. 1058.4 KG 92.60 ₹ 98,007.84

b Thermo-Mechanically Treated bars TMTC-500-8mm dia. 441.28 KG 94.50 ₹ 41,700.96

16 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 10.79 cum 5,670.00 ₹ 61,179.30

17 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 308.17 KG 546.80 ₹ 168,507.36

18 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.8mm thick with zinc coating not less than 275 gm/mz 41.26 sqm 1,501.30 ₹ 61,943.64

19 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works. 335.68 KG 114.60 ₹ 38,468.93

20 Carriage of Materials ₹ 0.00

b Stone Chips(110 KM) 10.510 cum 2,447.92 ₹ 25,727.64

c Bricks(1K+7P) 17259.37 Thousand 1,115.51 ₹ 19,253.00

d Local Sand 0.00 cum 310.03 ₹ 0.00

e Earth 0.00 cum 314.21 ₹ 0.00

21 Add difference cost of materials

b Bricks 17259.37 Thousand 1,565.44 ₹ 27,018.51

Excluding GST@12% and including GST@18% Part-A ₹ 1,254,819.73

22 Providing and fixing 19mm thick water proof ply-board, 12mm thick WPC board with mica of approved brand and shade with 150mm steel handle, godrej locks, M.S hings, magnetic catcher, suitable full threaded steel screws etc for making of cupboard/wardrobe of required size having shelves, racks and door with 19mm thick water proof ply-board etc. all complete job 358.59 sft 2,149.26 ₹ 770,703.14

23 Supply and installation of wooded flooring including quarter(round) bitand all complete 800.05 sft 289.10 ₹ 231,294.46

24 Supply and fixing wall panelling with 19 mm thick commercial ply-board with 1mm mica of approved brand and required shade with suitable full threaded gypsum or steel screws etc. All complete 132.81 sft 430.26 ₹ 57,142.83

Including GST@18% Part-B Total ₹ 1,059,140.43

25 Seignorage Fee

a Sone Sand(45KM) 21.15 cum 17.58 ₹ 371.82

b Stone Chips(110 KM) 10.51 59.54 ₹ 625.77

c Bricks(1K+7P) 17259.37 Thousand 607.50 ₹ 10,485.07

d Local Sand 0.00 cum 141.85 ₹ 0.00

e Earth 0.00 cum 33.00 ₹ 0.00

Part-C Add: 18% GST on Siegnorage Fee ₹ 13,549.53

Say Total Rs. 23,27,510/-(Twenty Three Lacs Twenty Seven Thousand Five Hundred Ten) Only

Name of the Contractor :-

Address of the Contractor :-

Contact No & Email of Bidder

I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate as mentioned in the Bill of quantity. In figure :-

Note 1.This sheet is protected.Bidders are advice to fill Name ,Address, contact no and email & Quoted rate in coloured cell only.

BIHAR STATE POWER HOLDING COMPANY LIMITED

NIT No. 05/PR/BSPHCL/2026

Name of Work Renovation of Kitchen, Puja room, & other misc. work in Qtr no-A/01 at BSPHCL colony, Punaichak, Patna

Estimated Cost ₹ 2,327,510.00

Cost of B.O.Q. ₹ 5,900.00

Earnest Money ₹ 47,000.00

Time of Completion 02 month

Bid Submission start date:- 04.02.2026

Bid Submission due date 18.02.2026 (upto 3:00 PM)

Date of submission of original DD:- 19.02.2026 (upto 3:00 PM)

Date of opening of Technical Part:- 19.02.2026 (upto 3:30 PM)

BILL OF QUANITITY

Sl. no. Name of work Qty Unit Rate Amount

1 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar 4.44 cum 823.70 ₹ 3,657.23

2 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum 42.51 sqm 5,662.10 ₹ 240,695.87

3 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 241.73 sqm 141.50 ₹ 34,204.80

4 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutoutsmade with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board 47.65 sqm 993.00 ₹ 47,316.45 #REF!

5 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 56.20 sqm 30.70 ₹ 1,725.34

6 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm 33.44 sqm 1,638.80 ₹ 54,801.47

7 Providing Labour for cleaning of work site and others misc. Work as per requirement of work site and as per .........E/I 10 each 556.77 ₹ 5,567.70

8 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termites' treatrnent(including the cost of chemical emulsion) Treatment of existing masonry using chemical emulsion@ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2(1 cement:2 coarse sand) to the full depth of the hole. With chlorpyriphos EC 20% with 1% concentration 113.95 M 54.00 ₹ 6,153.30

9 Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water tc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) 3.42 sqm 9,725.50 ₹ 33,261.21

10 Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) 13.73 sqm 7,074.90 ₹ 97,138.38

11 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 4.98 cum 3,998.10 ₹ 19,910.54

12 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 1.50 cum 4,688.30 ₹ 7,032.45

13 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth ) 30.49 M 178.30 ₹ 5,436.37

14 Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. 11.69 sqm 5,652.20 ₹ 66,074.22

15 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. ₹ 0.00

a Thermo-Mechanically Treated bars TMTC-500-10mm dia. 1058.4 KG 92.60 ₹ 98,007.84

b Thermo-Mechanically Treated bars TMTC-500-8mm dia. 441.28 KG 94.50 ₹ 41,700.96

16 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 10.79 cum 5,670.00 ₹ 61,179.30

17 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 308.17 KG 546.80 ₹ 168,507.36

18 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.8mm thick with zinc coating not less than 275 gm/mz 41.26 sqm 1,501.30 ₹ 61,943.64

19 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works. 335.68 KG 114.60 ₹ 38,468.93

20 Carriage of Materials ₹ 0.00

b Stone Chips(110 KM) 10.510 cum 2,447.92 ₹ 25,727.64

c Bricks(1K+7P) 17259.37 Thousand 1,115.51 ₹ 19,253.00

d Local Sand 0.00 cum 310.03 ₹ 0.00

e Earth 0.00 cum 314.21 ₹ 0.00

21 Add difference cost of materials

b Bricks 17259.37 Thousand 1,565.44 ₹ 27,018.51

Excluding GST@12% and including GST@18% Part-A ₹ 1,254,819.73

22 Providing and fixing 19mm thick water proof ply-board, 12mm thick WPC board with mica of approved brand and shade with 150mm steel handle, godrej locks, M.S hings, magnetic catcher, suitable full threaded steel screws etc for making of cupboard/wardrobe of required size having shelves, racks and door with 19mm thick water proof ply-board etc. all complete job 358.59 sft 2,149.26 ₹ 770,703.14

23 Supply and installation of wooded flooring including quarter(round) bitand all complete 800.05 sft 289.10 ₹ 231,294.46

24 Supply and fixing wall panelling with 19 mm thick commercial ply-board with 1mm mica of approved brand and required shade with suitable full threaded gypsum or steel screws etc. All complete 132.81 sft 430.26 ₹ 57,142.83

Including GST@18% Part-B Total ₹ 1,059,140.43

25 Seignorage Fee

a Sone Sand(45KM) 21.15 cum 17.58 ₹ 371.82

b Stone Chips(110 KM) 10.51 59.54 ₹ 625.77

c Bricks(1K+7P) 17259.37 Thousand 607.50 ₹ 10,485.07

d Local Sand 0.00 cum 141.85 ₹ 0.00

e Earth 0.00 cum 33.00 ₹ 0.00

Part-C Add: 18% GST on Siegnorage Fee ₹ 13,549.53

Say Total Rs. 23,27,510/-(Twenty Three Lacs Twenty Seven Thousand Five Hundred Ten) Only

Name of the Contractor :-

Address of the Contractor :-

Contact No & Email of Bidder

I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate as mentioned in the Bill of quantity. In figure :-

Note 1.This sheet is protected.Bidders are advice to fill Name ,Address, contact no and email & Quoted rate in coloured cell only.