RequiredCertificate (Requested in ATC) Bid to RA enabled No Student Desks And Benches (Angle Iron Frame) ( 45 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Type of DESKS BENCHES INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK ONLY DESKS
RequiredONLY BENCHES
RequiredINTEGRATED DESK CUM SEATING
RequiredINTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK
RequiredONLY DESK WITH SHELF STORAGE UNDER DESK 1/5 Desks/Benches Configuration TWO SEATER SINGLE SEATER
RequiredTWO SEATER
RequiredTHREE SEATER Length of Desks
RequiredSeats and Backrest (if provided) in mm (±20 mm) 1300 mm 450 mm
Required470 mm
Required900 mm
Required920 mm
Required1300 mm
Required1320 mm
RequiredONLY SEATING NO DESK
RequiredONLY DESK NO SEATING Transportations Freight charges Offer Prices are on Free Delivery at Consignee site basis. * Approval of Advance sample No Advance Sample * DESKS SPECIFICATIONS Material of Desk Top 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S
RequiredP or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side * Material for Desk Top support 1 no. horizontal support of MS Angle size 25 mm x 25 mm x 2.5 mm thick 1 no. horizontal support of MS Angle size 25 mm x 25 mm x 2.5 mm thick
Required1 no. horizontal support of MS Angle size 30 mm x 30 mm x 2.5 mm thick
Required2 no. horizontal support of MS Angle size 25 mm x 25 mm x 2.5 mm thick
Required2 no. horizontal support of MS Angle size 30 mm x 30 mm x 2.5 mm thick
RequiredONLY SEATING NO DESK Material of Support Structure for Desks or Side Pannel MS Angle of size 25 mm x 25 mm x 2.5 mm thick MS Angle of size 25 mm x 25 mm x 2.5 mm thick
RequiredMS Angle of size 30 mm x 30 mm x 2.5 mm thick
RequiredONLY SEATING NO DESK Height of Desk Top in mm (± 10 mm) 760 mm 500 mm
Required550 mm
Required600 mm
Required650 mm
Required700 mm
Required730 mm
Required760 mm
RequiredONLY SEATING NO DESK Width of Desk Top in 460 mm 300 mm
Required350 mm
Required400 2/5 mm (± 10 mm) mm
Required435 mm
Required460 mm
Required500 mm
Required550 mm
Required600 mm
RequiredONLY SEATING NO DESK BENCHES/SEATING SPECIFICATION Material of Seat and Backrest (if provided) 25 mm thick MDF Board of grade SBG II conforming to IS 12406 laminated with minimum 0.6 mm thick on Top side of type S
RequiredP or F having index 3.2.3 conforming to IS 2046 and minimum 0.5 mm thick balancing laminate on the other side * Material for Seat support 2 nos. Vertical support of MS angle size 25 mm x 25 mm x 2.5 mm thick 2 nos. Vertical support of MS angle size 25 mm x 25 mm x 2.5 mm thick
Required2 nos. Vertical support of MS angle size 30 mm x 30 mm x 2.5 mm thick
Required3 nos. Vertical support of MS angle size 25 mm x 25 mm x 2.5 mm thick
Required3 nos. Vertical support of MS angle size 30 mm x 30 mm x 2.5 mm thick Material of Support Structure MS angle of size 25 mm x 25 mm x 2.5 mm thick MS angle of size 25 mm x 25 mm x 2.5 mm thick
RequiredMS angle of size 30 mm x 30 mm x 2.5 mm thick
RequiredONLY DESK NO SEATING Material of Seat Cushion WITHOUT CUSHION 40 mm thick PU foam of density 40 gram per cubic cm
RequiredWITHOUT CUSHION
RequiredONLY DESK NO SEATING Width of Seating in mm (±10 mm) 300 mm 270 mm
Required300 mm
Required320 mm
Required340 mm
Required360 mm
Required400 mm
Required450 mm
Required500 mm
RequiredONLY DESK NO SEATING Height of Seat in mm (±10 mm) 460 mm 370 mm
Required400 mm
Required430 mm
Required460 mm
Required500 mm
Required550 mm
RequiredONLY DESK NO SEATING Width of backrest if provided in mm (± 5 mm) 300 200
Required220
Required240
Required260
Required270
Required280
Required300
Required325
RequiredNo Backrest Back Support for Provided without Provided with Cushion
Required3/5 Seating of same material as seating cushion Provided without cushion
RequiredBack support not provided MISC Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) 250 mm * Ends of the sides To be double fold after cutting * Dressing of Components Free from crack/surface free from distortion/no burrs in holes. * COLOUR & FINISH Colour of Finish/Paint As per buyer's choice * Desk top finishing Two long sides shall have post form half round profile and other two sides edge banded with 2 mm thick PVC tape with the help of hot melt glue * Logo/Marking No marking Marking to be done on desks and benches as per Buyer instructions
RequiredNo marking WARRANTY Warranty period in number of years 3 1
Required2
Required3 CERTIFICATION Test reports to be furnished to buyer's on demand NO YES
RequiredNO OEM of offered product is ISO 9001:2015 certified NO * OEM of offered product is ISO 14001:2015 certified NO * OEM of offered product is ISO 18001:2007 certified NO * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
