Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC 41 BIDHANGARH SOUTH KOLKATA 700066 | KOLKATA | KOLKATA | WEST BENGAL | 700066 | L1 | Accepted-AOC Being L1 bidder. | |
| 2 | L2₹26.5 L+₹3.2 L (13.6%)Rejected-Finance | L2 | Rejected-Finance Rejected due to higher than L1 bidder. Amount considered after deduction of schedule of credit amount i.e. Rs. 37071.00. | |
| 3 | L3₹28.2 L+₹4.9 L (21.0%)Rejected-Finance BESIDE SHRI RAM PIPES SARDAR PATEL TIMBER MARKET P O W R S COLONY BHANPURI RAIPUR CHHATTISGARH 492008 | RAIPUR | CHHATTISGARH | 492008 | L3 | Rejected-Finance Rejected due to higher than L1 bidder. Amount considered after deduction of schedule of credit amount i.e. Rs. 37071.00. | |
| 4 | L4₹29.2 L+₹5.9 L (25.4%)Rejected-Finance | L4 | Rejected-Finance Rejected due to higher than L1 bidder. Amount considered after deduction of schedule of credit amount i.e. Rs. 37071.00. | |
| 5 | L5₹31.1 L+₹7.8 L (33.4%)Rejected-Finance | L5 | Rejected-Finance Rejected due to higher than L1 bidder. Amount considered after deduction of schedule of credit amount i.e. Rs. 37071.00. |
Tender Value
₹31.8 L
EMD Value
₹63,600
Closing Date
21 Oct 2019, 6:00 pmClosed
GE CENTRAL, KOLKATA
GE CENTRAL KOLKATA, T/37 NAPIER ROAD, POST HASTINGS, KOLKATA-700022
REPAIR REPLACEMENT POLISHING OF ALL SORTS OF WOODEN CHAIRS TABLES SOFA STOOL DRESSING CB SIDE BOARD BOOK CASE ETC AT FURNITURE YARD AT FORT WILLIAM UNDER GE CENTRAL KOLKATA
2019_MES_270404_2
8197
Open Tender
Miscellaneous Works
Item Rate
270 days
Kolkata
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE CENTRAL KOLKATA
₹63,600
Yes
6 Jan 2020
12 Oct 2019
23 Oct 2019
12 Oct 2019
21 Oct 2019
16 Oct 2019
12 Oct 2019 - 15 Oct 2019
Amount
Material & Labour for removing unserviceable wooden parts from Chair wooden bottom without arms and supply and fix wooden parts made out of 1st class hard wood (teak wood) and fixing the same with the existing furniture articles with suitable bamboo pins/glues all as specified and directed by Engr-in-Charge for the parts mentioned here-in-below:- Reference Drawing No:- FD- 285
Rear Legs
Front Legs
Front/Side (both side)/rear rails
Stiffeners back side
Leg stiffeners long side
Leg stiffeners short side
Seat ply 6mm commercial cut in shape of size with perforated
Material and Labour for polishing of the Chair wooden bottom without arms with high clean glossy finish french polish approved quality including preparation of the surface by putty work and smoothening the visible surface with samd paper as specified. Polish shall be done on all exposed surface and remaining surface shall be applied one coat of wood primer complete all as directed. Reference Drawing No:- FD- 285
Material & Labour for removing unserviceable wooden parts from Chair dining and supply and fix wooden parts made out of 1st class hard wood (teak wood) and fixing the same with the existing furniture articles with suitable bamboo pins/glues all as specified and directed by Engr-in-Charge for the parts mentioned here-in-below:- Reference Drawing No:- FD- 279
Rear Legs
Front Legs
Rear/front/side rails incl cane hole
Leg Stiffeners long side
Leg stiffeners short side
Back rest
Material and Labour for polishing of the Chair dining with high clean glossy finish french polish approved quality including preparation of the surface by putty work and smoothening the visible surface with samd paper as specified. Polish shall be done on all exposed surface and remaining surface shall be applied one coat of wood primer complete all as directed. Reference Drawing No:- FD- 279
Material & Labour for removing unserviceable wooden parts from Chair writing and supply and fix wooden parts made out of 1st class hard wood (teak wood) and fixing the same with the existing furniture articles with suitable bamboo pins/glues all as specified and directed by Engr-in-Charge for the parts mentioned here-in-below:- Reference Drawing No:- FD- 280
Rear Legs
Front Legs
Rear/front/side rails incl cane hole
Leg Stiffeners long side
Leg stiffeners short side
Back rest
Arm rest
Material and Labour for polishing of the Chair writing with high clean glossy finish french polish approved quality including preparation of the surface by putty work and smoothening the visible surface with samd paper as specified. Polish shall be done on all exposed surface and remaining surface shall be applied one coat of wood primer complete all as directed. Reference Drawing No:- FD- 280
Material & Labour for removing unserviceable wooden parts from Chair easy and supply and fix wooden parts made out of 1st class hard wood (teak wood) and fixing the same with the existing furniture articles with suitable bamboo pins/glues all as specified and directed by Engr-in-Charge for the parts mentioned here-in-below:- Reference Drawing No:- FD- 229
Rear Legs/Front Legs
Rear/Front rails incl cane hole of legs
Side rails for seat including cane hole
Front/rear stiffeners
Upper/lower rails for back rest incl holes
Arm rest
Material and Labour for polishing of the Chair easy with high clean glossy finish french polish approved quality including preparation of the surface by putty work and smoothening the visible surface with samd paper as specified. Polish shall be done on all exposed surface and remaining surface shall be applied one coat of wood primer complete all as directed. Reference Drawing No:- FD- 229
Material & Labour for removing unserviceable wooden parts from Stool Dressing CB and supply and fix wooden parts made out of 1st class hard wood (teak wood) and fixing the same with the existing furniture articles with suitable bamboo pins/glues all as specified and directed by Engr-in-Charge for the parts mentioned here-in-below:- Reference Drawing No:- FD- 282
Long rails
Short rails
Leg stiffeners long side
Leg stiffeners short side
Material and Labour for polishing of the Stool Dressing CB with high clean glossy finish french polish approved quality including preparation of the surface by putty work and smoothening the visible surface with samd paper as specified. Polish shall be done on all exposed surface and remaining surface shall be applied one coat of wood primer complete all as directed. Reference Drawing No:- FD- 282, 250,27
Material and Labour for removing unservicable plastic cane and recaning with approved plastic cane 2mm wide 0.5 thickness half round as per Godrej pattern and providing 4mm wide half round border all around as specified in drawing and directed by Engr-in-Charge for the items mentioned here-in-after:-
Chair dining Reference Drawing No:- FD- 279
Chair writing Reference Drawing No:- FD- 280
Chair easy(seat & back) Reference Drawing No:- FD- 229
Stool dressing CB Reference Drawing No:- FD- 282
Supply and fix new parts made out of teak wood and fixing with the existing wooden table with bamboo pins after replacement of unserviceable parts all as specified in drgs and directed by Engr-in-Charge for the items mentioned here-in-after:-
Legs for table dining 6/8 pers Reference Drawing No:- FD- 273
Front/rear rails of table dining 6/8 pers Reference Drawing No:- FD- 273
Side rails of table dining 6/8 pers Reference Drawing No:- FD- 273
Centre rails of table dining 6/8 pers Reference Drawing No:- FD- 273
Leg of table 3'x2' w/o/with drawer Reference Drawing No:- FD- 283, 284
Front/rear rails of table 3'x2' w/o/with drawer Reference Drawing No:- FD- 283, 284
Side rails of table 3'x2' w/o/with drawer Reference Drawing No:- FD- 283, 284
Drawer of table 3'x2' Reference Drawing No:- FD- 283, 284
Front/rear top rails of table writing Reference Drawing No:- FD- 275
Legs of table writing Reference Drawing No:- FD- 275
Stiffeners of table writing Reference Drawing No:- FD- 275
Side rails of table writing Reference Drawing No:- FD- 275
Leg of table centre Reference Drawing No:- FD- 274
Front/rear rails of table centre Reference Drawing No:- FD- 274
Side rails of table centre Reference Drawing No:- FD- 274
Leg of table 3'x3' Reference Drawing No:- FD- 291
Front/rear/side rails table 3'x3' Reference Drawing No:- FD- 291
Leg of peg table Reference Drawing No:- FD- 277
Bottom rail of peg table Reference Drawing No:- FD- 277
Top rail of peg table Reference Drawing No:- FD- 277
Leg of teapoy Reference Drawing No:- FD- 278
Side rail of teapoy Reference Drawing No:- FD- 278
Top rails of teapoy Reference Drawing No:- FD- 278
Legs for bench wksp Reference Drawing No:- FD- 145(M)
D handle for bench wksp Reference Drawing No:- FD- 145(M)
Short rail and long rail of bench wksp Reference Drawing No:- FD- 145(M)
Drawer of bench wksp Reference Drawing No:- FD- 145(M)
Material and Labour for replacement of unservicable worn out table top of following type with prelaminated particle board 18/19 mm by fixing with screws on existing frame and tightening all loose components properly and providing 4mm thick teak wood beading, duly polished and apply two coat of french polish to beading of the tables for obtaining glossy finish at the site as directed by the Engr-in-charge :-
Top of table dining 8 pers Reference Drawing No:- FD- 273
Top for table dining 6 pers Reference Drawing No:- FD- 273
Top for table 3' x 2' w/o drawer Reference Drawing No:- FD- 284
Top for table 3'x2' with drawer Reference Drawing No:- FD- 283
Top for table writing Reference Drawing No:- FD- 275
Top of Teapoy Reference Drawing No:- FD- 278, 382
Top of table centre Reference Drawing No:- FD- 274
Top for teapoy verandah Reference Drawing No:- FD- 255
Top for table 3' x3' Reference Drawing No:- FD- 291
Top for peg table Reference Drawing No:- FD- 277
Top for desk school child Reference Drawing No:- FD- 124
Top for bench wksp Reference Drawing No:- FD- 145(M)
Material and labour for polishing with high quality glossy french polish of approved quality including preparation of the surface by putty work and smoothening the surface with sand paper as specified, Polish shall be done to all exposed surface and remaining surface shall be applied with one coat of pink primer all as shown on drawing complete all as specified and as directed by Engr-in-Charge for the items mentioned here-in-after\:-
Table dining 8 pers Reference Drawing No:- FD- 273
Table dining 6 pers Reference Drawing No:- FD- 273
Table 3' x 2' w/o drawer Reference Drawing No:- FD- 284
Table 3' x 2' with drawer Reference Drawing No:- FD- 283
Table writing Reference Drawing No:- FD- 275
Teapoy Reference Drawing No:- FD- 278
Table Centre Reference Drawing No:- FD- 274
Table 3' x 3' Reference Drawing No:- FD- 291
Peg Table Reference Drawing No:- FD- 277
Bench Wksp Reference Drawing No:- FD- 145(M)
Desk school child type A Reference Drawing No:- FD- 124
Supply and fix new parts made out of teak wood and fixing with the existing chair dining with long back with cushion with bamboo pins after replacement of unserviceable parts all as specified in drgs and directed by Engr-in-Charge for the items mentioned here-in-after:-
Rear Legs Reference Drawing No:- FD- 357
Front Legs Reference Drawing No:- FD- 357
Front/Side (both side)/rear rails Reference Drawing No:- FD- 357
Stiffeners back side Reference Drawing No:- FD- 357
Leg stiffeners long side Reference Drawing No:- FD- 357
Leg stiffeners short side Reference Drawing No:- FD- 357
Seat ply 12mm commercial cut in shape of size with perforated Reference Drawing No:- FD- 357
Back rest 20 density cushion covered with leather rexine Reference Drawing No:- FD- 357
Seat 30 density cushion covered with leather rexine Reference Drawing No:- FD- 357
Polishing of chair dining with long back with cushion Reference Drawing No:- FD- 357
Supply and fix new parts made out of teak wood and fixing with the existing chair dining MAP with cushion with bamboo pins after replacement of unserviceable parts all as specified in drgs and directed by Engr-in-Charge for the items mentioned here-in-after:-
Rear Legs Reference Drawing No:- FD/E6/ MAP/10 (R)
Front Legs Reference Drawing No:- FD/E6/ MAP/10 (R)
Front/Side (both side)/rear rails Reference Drawing No:- FD/E6/ MAP/10 (R)
Stiffeners back side Reference Drawing No:- FD/E6/ MAP/10 (R)
Leg stiffeners long side Reference Drawing No:- FD/E6/ MAP/10 (R)
Leg stiffeners short side Reference Drawing No:- FD/E6/ MAP/10 (R)
Seat ply 12mm commercial cut in shape of size with perforated Reference Drawing No:- FD/E6/ MAP/10 (R)
Seat 32 density cushion w/covered Reference Drawing No:- FD/E6/ MAP/10 (R)
Polishing of chair dining MAP with cushion Reference Drawing No:- FD/E6/ MAP/10 (R)
Material and Labour for removing dent/ paint of Teapoy varandah and preparation of surface by applying putty to smoothening the surface and painting with two coats of synthetic enamel paint of approved shade inside and outside completely over a coat of pink primer by using spray machine only completely all as specified and as directed by Engr-in-Charge. Reference Drawing No:- FD- 255
Material and Labour for removing worn out unserviceable shutter from locker bed side and providing the new one of existing size made out of 18mm thick particle board commercial ply veneered one side along with teak wood bead and fixing the same in original position complete all as directed by Engr-in-Charge. Reference Drawing No:- FD- 54 (M)
Material and labour for taking our existing broken/worn out fittings from locker bed side and supply and fixing complete all as per drawing and as directed by Engr-in-Charge for the fittings mentioned here-in-after:-
Aluminium 'D' type handle 100mm Reference Drawing No:- FD- 54 (M)
Aluminium hasp and staple 75mm Reference Drawing No:- FD- 54 (M)
Ball spring catch of best quality Reference Drawing No:- FD- 54 (M)
Aluminium rod of 20mm dia Reference Drawing No:- FD- 54 (M)
Material and labour for removal of old worn out unserviceable plank of top from locker bed side and providing the new one made out of 1st class teak wook well seasoned of size 200mm x 760mm x 19mm and fixing the same in the original position complete all as per drawings and as directed by Engr-in-Charge. Reference Drawing No:- FD- 54 (M)
Material and labour for removing the existing worn out unserviceable plank of side from the locker bed side and providing the new one made out of 1st class teak wood well seasoned of the size 200mm x 875mm x 19mm and fixing the same in the orifinal position complete all as per drawing and as directed by Engr-in-Charge. Reference Drawing No:- FD- 54 (M)
Material and labour for removal of old worn out unserviceable plank of bottom from locker bed side and providing the new one made out of 1st class teak wook well seasoned of size 200mm x 760mm x 19mm and fixing the same in the original position complete all as per drawings and as directed by Engr-in-Charge. Reference Drawing No:- FD- 54 (M)
Material and labour for removing the worn out unserviceable shelf from locker bed side and providing the new one made out of 12mm thick, ply commercial veneered of BWR grade of size 575mm x 12mm and fixing the same in the original position complete all as per drawing and directed by Engr-in-charge. Reference Drawing No:- FD- 54 (M)
Material and labour for removing the worn out unserviceable back ply from locker bed side and providing the new one made out of 6mm thick ply BWR and fixing new one in the same original position complete all as per drawing and as directed by Engr-in-Charge. Reference Drawing No:- FD- 54 (M)
Material and labour for removing the existing polish from locker bed side from inside and outside by scrapping or any other means and filling the gaps by putty, smoothen the surface for polish with sand paper required grade and polishing the same to bring the surface to required glossy shine complete all as directed by Engr-in-Charge. Reference Drawing No:- FD- 54 (M)
Material and Labour for Removing worn out unserviceable shutter from locker Bed Side Plywood pattern and providing the new one of existing size made out of 18mm thick particle board commercial ply veneered both side of size 987mm x 405mm x along with teak wood bead and fixing he same original position complete all as directed by Engr-in-Charge. Reference Drawing No:- FD- 222
Material and Labour for Removing worn out unserviceable shutter from locker Bed Side Plywood pattern and providing the new one of existing size made out of 18mm thick particle board commercial ply veneered both side of size 987mm x 405mm x along with teak wood bead and fixing he same original position complete all as directed by Engr-in-Charge. Reference Drawing No:- FD- 222
Material and labour for taking our existing broken/worn out fittings from locker bed side Plywood pattern and supply and fixing complete all as per drawing and as directed by Engr-in-Charge for the fittings mentioned here-in-after:-
Piano type hinges(Stainless steel of size 65mm) Reference Drawing No:- FD- 222
Aluminium 'D' type handle 100mm Reference Drawing No:- FD- 222
Aluminium hasp and staple 75mm Reference Drawing No:- FD- 222
Aluminium rod of 20mm dia Reference Drawing No:- FD- 222
Ball spring catch of best quality Reference Drawing No:- FD- 222
Material and labour for Removal of old worn out unserviceable top from the Locker Bed Side Plywood pattern providing the new one made out of particle board 19mm thick commercial ply veneered both side of size and fixing the same in position completee all as per drawing and as directed. Reference Drawing No:- FD- 222
Material and labour for Removal of old worn out unserviceable bottom from the Locker Bed Side Plywood patternPlywood pattern and providing the new one made out of particle board 19mm thick commercial ply veneered both side of size and fixing the same in position complete all as per drawing and as directed by Engr-in-Charge. Reference Drawing No:- FD- 222
Material and labour for Removal of old worn out unserviceable side of the Locker Bed Side Plywood pattern and providing the new one made out of particle board 19mm thick commercial ply veneered both side of size and fixing the same in position complete all as per drawing and as directed. Reference Drawing No:- FD- 222
Material and labour for Removing the worn out unserviceable shelf from Locker Bed Side Plywood pattern and providing the new one make out of 12mm thick ply commercial veneered BWR grade and fixing the same in the original position complete all as per drawing and as directed. Reference Drawing No:- FD- 222
Material and labour for Removing the unserviceable worn out back ply from Locker Bed Side Plywood pattern and providing the new one made out of 6mm thick ply BWR grade and fixing the same in the original position complete all as per drawing and as directed. Reference Drawing No:- FD- 222
Material and labour for Removing the existing polish from locker bed side Plywood pattern from inside and outside by scrapping or any other means and filling the gaps by putty, smoothen the surface for polish with sand paper required grade and polishing the same to bring the surface to required glossy shine complete all as directed by Engr-in-Charge. Reference Drawing No:- FD- 222
Material and labour for removing old unserviceable Top from Book Case and supply and fix the Top that shall be made of 1st class hard wood to the existing as per specification given in the drgs and direction by Engineer-in-Charge. Reference Drawing No:- FD- 237
Material and labour for removing old unserviceable Bottom from existing Book Case and supply and fix the Bottom shall be made of 1st class hard wood to the existing as per specification in drgs and direction by Engineer-in-Charge. Reference Drawing No:- FD- 237
All as per item No 29.00 here-in-before but for side(Both side) of Book case. Reference Drawing No:- FD- 237
All as per item No 29.00 here-in-before but for shelves of Book case. Reference Drawing No:- FD- 237
All as per item No 29.00 here-in-before but for shutter complete of Book Case. Reference Drawing No:- FD- 237
Material and labour for removing old unserviceable Back from Book Case and supply and fix the Back shall be made of 6mm commercial ply wood as per specification given in drgs and direction by Engineer-in-Charge. Reference Drawing No:- FD- 237
Material and labour for removing the existing polish from Book Case from inside and outside by scrapping or any other means and filling the gaps by putty, smoothen the surface for polish with sand paper required grade and polishing the same to bring the surface to required glossy shine complete all as directed by Engr-in-Charge. Reference Drawing No:- FD- 237
Supply and fix new wooden parts/members made out from 18mm thick pre-laminated particle board exterior grade teak face to the existing table bed side all as shown on drawings and as directed by Engr-in-Charge including taking down old unserviceable for the wooden parts mentioned here-in-after:-
Top of table bed side Reference Drawing No:- FD- 276
Side (Both side) of table Bed side Reference Drawing No:- FD- 276
Shelf/bottom base of table bed side Reference Drawing No:- FD- 276
Back base ply 6mm commercial Reference Drawing No:- FD- 276
Material and labour for removing the existing polish from Table Bed Side by scrapping or any other means and filling the gaps by putty, smoothen the surface for polish with sand paper required grade and polishing the same to bring the surface to required glossy shine complete all as directed by Engr-in-Charge. Reference Drawing No:- FD- 276
Material and labour for replacement of unserviceable cushion with size 21"x22"x100 mm cool foam cushion of 40 density including providing initial white marking(Kora) cloth cover inside to stitched and thereafter cover with new tapestry (as per approved sample) and provided with Nylon zip suitable for sofa cushions all as directed by Engr-in-Charge. Make of Cushion : Kurlon/Sleepwell/Feather. Note:- The cost of acrylic tapestry should not be less than Rs 200 per meter (48" wide cloth) Reference Drawing No:- FD- 281
Material and labour for replacement of worn out /faded tapestry for serviceable cushions with new tapestry cover of approved sample, duly stitched and provided with nlyon zip all as directed by Engr-in-Charge. Note:- The cost of acrylic tapestry should not be less than Rs 200 per meter (48" wide cloth) Reference Drawing No:- FD- 281
Material and labour for removal of broken parts from Sofa 4 / 5 seater carefully without disturbing adjoining parts and Supply and fix with new components, in lieu of dismantled one, with carpentry joints shown in the drawing in tact tightly fixed with glue, wooden pins and polishing the repair portion to match with rest of the item mentioned here-in-after all as directed by the Engr-in-charge.
Wooden battens Reference Drawing No:- FD- 281
Wooden bearers for single seater Reference Drawing No:- FD- 281
Wooden bearers for 3 seater Reference Drawing No:- FD- 281
Wooden arm Reference Drawing No:- FD- 281
Wooden rail for back support for 3 seater Reference Drawing No:- FD- 281
Wooden rail for back support for single seater Reference Drawing No:- FD- 281
Leg rear / front Reference Drawing No:- FD- 281
3 Seater front rail Reference Drawing No:- FD- 373
Single seater front rail Reference Drawing No:- FD- 281
Seat side rail Reference Drawing No:- FD- 281
Material and labour for polishing of the Sofa set five seater with high clean glossy finish french polish approved quality including preparation of the surface by putty work and smoothening the surface with emery paper as specified. Polish shall be done on all exposed surface and remaining surface shall be applied on a coat of pink primer all as directed by the Engr-in-charge. Reference Drawing No:- FD- 281
Supply and Fix new mirror to the existing table dressing gents with mirror all as shown on drawing and as directed by Engr-in-Charge including taking down old unserviceable mirror with frame from table dressing gents. Make of mirror : Saint Govin/Modi Guard/Golden Fish Reference Drawing No:- FD- 230
All as per item No 41.00 here-in-before but for table dressing ladies with mirror Reference Drawing No:- FD- 379
Supply and Fix new drawers to the existing table dressing gents with mirror all as shown on drawing and all as directed by Engr-in-Charge including taking down old unserviceable one. Reference Drawing No:- FD- 230
All as per item No 43.00 here-in-before but for table dressing ladies with mirror Reference Drawing No:- FD- 379
Supply and Fix new top made out of 18mm thick prelaminated particle board to the existing table dressing gents with mirror wherever as required all as shown on drawing including taking down old unserviceable one all as directed by Engr-in-Charge. Reference Drawing No:- FD- 230
All as per item No 45.00 here-in-before but for table dressing ladies with mirror Reference Drawing No:- FD- 379
Supply and Fix new bottom made out of 19mm thick teak veneered ply wood one side to the table dressing Ladies with mirror all as shown on drg including taking down old unserviceable one all as directed by Engr-in-Charge. Reference Drawing No:- FD- 379
All as per item No 47.00 here-in-before but for table dressing gents with mirror with mirror Reference Drawing No:- FD- 230
Supply and Fix new side frame to the existing table dressing gents with mirror made out from prelaminated particle board 18mm thick wherever required all as shown on drgs including taking down old unserviceable one all as directed by Engr-in-Charge. Reference Drawing No:- FD- 230
All as per item No 49.00 here-in-before but for table dressing ladies with mirror Reference Drawing No:- FD- 379
S&F new back base ply 6mm teak face to suitable table dressing gents with mirror all as shown on drgs including taking down old unserviceable one. Make : Kitply/Century/Green Ply Reference Drawing No:- FD- 230
All as per item No 51.00 here-in-before but for table dressing ladies with mirror Reference Drawing No:- FD- 379
Material and labour for removing the existing polish table dressing gents with mirror from inside and outside by scrapping or any other means and filling the gaps by putty, smoothen the surface for polish with sand paper required grade and polishing the same to bring the surface to required glossy shine complete all as directed by Engr-in-Charge. Reference Drawing No:- FD- 230
All as per item No 53.00 here-in-before but for table dressing ladies with mirror Reference Drawing No:- FD- 379
Supply and Fix new knobs aluminium anodised desk brown to the existing dressing table gents/ladies indlucing taking down old unserviceable one all as directed by Engr-in-Charge. Reference Drawing No:- FD- 230 & 379
MAZUMDER & CO
KALPANA TRADING CO
SOVA ENTERPRISE
RELIABLE TRADERS AND ENGINEERS
P N GUPTA AND SONS
Tirupati Buildcon Pvt. Ltd.
BENGAL TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .