Carrying out periodic maintenance works for the Academic office and the Guest house

Providing and Painting all wood work, like frames, wooden glazing and flush door shutter alorund ( thickness of door shutter) etc., with TWO or more coats of approved SYNTHETIC ENAMEL PAINT of first quality and approved colour to give an even shade over a coat of synthetic enamel primer including removing carefully the existing SYNTHETIC ENAMEL PAINT / Acrylic emulsion white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wooden surface smooth including repairs to scratches, cleaning the surfaces, filling the crevices with approved filler, applying a coat of approved wood putty on whole surface and rubbing the surface to achieve desired smooth surface, to proper line level, including scaffolding, cost of labour, all material, wastages etc., complete all as per specifications. Note - Actual painted area will be measured for payment.

Providing and Painting all M.S steel work like M.S railing, gaurd bars etc.,with two or more coats to get uniform finish with SYNTHETIC ENAMEL PAINT of first quality and approved colour to give an even shade over a coat of zinc chromate primer including cleaning the surfaces, filling the crevices with approved filler, removing the rusted portion with rust remover, preparting the surface using water emery paper, scaffolding, etc., complete all as per specification. Note - Actual painted area will be measured for payment.

Providing and Painting internal plastered surfaces with two or more coats of premium emulsion paint of approved brand and colour of M/s Berger/ M/s Nerolac or equivalent) to give an even shade with required finish over a coat of approved wall primer including cleaning the surfaces, removing the damaged surfaces, applying one or more coat of M/s BIrla wall care putty to a minimum thickness of 1.5mm or more to make wall true line an level, covering all the plater undulations, filling the crevices with approved filler, scaffolding, etc., complete all as per specifications.

Providing and Painting one or more coat of SmartCare Damp Block 2K a two component acrylic polymer-modified cementitious high performance water repellant coating for back side of bath room walls and wherever dampness is observed in the wall surface of approved brand and colour of M/s Berger/ M/s Nerolac/ M/s Asian paints or equivalent including cleaning the surfaces, removing the damaged surfaces, to make wall true line an level, covering all the plater undulations, filling the crevices with approved filler, scaffolding, etc., complete all as per specifications.

Providing and painting the external plastered surfaces for walls, ceiling with two coat of weather coat long life of M/s. Berger paint or equivalent based on PU silicone technology over a coat of primer to withstand heavy rain and water repellent or equivalent having protection against fungal growth, flaking, fading, alkali and UV degradation and to give an even shade with required finish including cleaning the surfaces, applying one coat of primer, filling the crevices with approved filler with non shrink aquatic crack filler of M/s. Fosroc one coat of sealer and up to with scaffolding at all levels, heights, locations and lead, including preparing the surfaces, providing wall care putty in two or more coats to get uniform plain surface to line & level, scaffolding, double height staging, cleaning etc, at all floors, locations. Heights and lead, surface preparation and making good by proper grinding to ger uniform finish, etc., complete all as per specifications, drawings and as directed by the Engineer-in-charge. etc., complete all as per specifications and as directed by EIC.

Providing, and applying waterproofing surface treatment to the existing stone cladding areas after necessary surface preparation as under - Surface Preparation- Taking out the old motor from the existing stone joints with chisel/brush/hacking hammer with suitable tool & tackle. Appling Nitibond SBR of M/s Fosroc/ Nerolac Perma Super 2K of M/s.Nerolac for the vertical and horizontal joints. Providing and filling M/s. Bal endura grout powder ( Bal endura grout powder shall be mixed with M/s. Fosroc nitobond SBR with 1 to 2 ratio (1 Nito bond SBR liquid to 2 Bal endura grout powder)) for the vertical and horizontal joints for a depth of at least 5-8mm and an width of 5-6mm. The same joints shall be trimmed out to a uniform thickness using emery paper after setting and curing the grout powder. The entire surface shall be treated two or more coats using M/s. Fosroc Nitocote SN 522/ Perma treat of M/s.Nerolac Colourless Silicone water repellent by spraying with compressor machine at all heights, locations and lead etc., complete as per specifications and as directed by EIC.

Providing and applying integral Epoxy grout granite/tile joint crystalline slurry for waterproofing treatment and seal the joints properly with the specified epoxy joint grout to make the joints waterproof etc., The granite joints to be opened by mechanical means maximum making a groove width of 5mm and 6 to 8mm deep in granite/tile including preparing the surfaces as per the manufactured specifications for horizontal/vertical surfaces and applying the same from negative (internal) or positive side with the help of synthetic fiber brush including cleaning the surface, dry, sound and free from all loose particles, if any contamination such as oil, grease, mould, dirt etc., should be removed by mechanical means like scrubbing or vacuum cleaning or joints shall be cleaned with die cutter machine and filling the joints with M/s. Sika, M/s. MYK Laticrete stellar, M/s. Fosroc Nitotile EPW or equivalent epoxy grout materials matching to granite colour with UV stable and flexible etc., complete as per the specification. After completion of joint grouting , joints shall be finished properly with matching colour epoxy grout to give uniform finish of the surrounding areas.