Repair or Renovation work of Inpection House at Sonbarsa in Irrigation Division Gorakhpur.

Amount

CIVIL WORK

Dismentling of old cement concrete including base concrete floor/ roof i/c all labours T&P etc.

Dismentling of old exiting plaster including disposal of refuse within distance of 60 meter i/c all labours T&P etc.

Dismentling of old doors, windows, chaukhat with holdfast i/c all cost of materials, labours t&p etc.

Earth work in digging foundation for pillars in boundry walls with its proper disposal etc.

Earth work in filling Sonbarasa I.H. campus with its proper disposal and manual compaction etc.

First class brick work in 1:4 C.M.of walls and boundry walls including all cost of materials labours t&p etc.

Providing and laving wire mesh of size 1”x1”11 guage onRoof. Including all cost of materials, labours t&p etc.

C.C.1:2:4 Providing 40mm thick cement concrete approved coarse sand and 20mm guage graded stone ship in roof for treatment work and for coping (gate piller and boundary pilller) including all cost of materials, labours, T&P etc.

C.C.1:4:8 in Pillars foundation i/c all cost of materials , labour, T& P etc.

Centering and shuttering for R.C.C.work Including all cost of material,T&Pand Labour etc.

RCC.work for gate piller and boundary piller with 1:2:4 (1 cement 2 course sand 4 graded stone aggregate 10 - 20 mm size)

Reinforcement for R.C.C.work including cutting strenthing, bemding and placing in position complete.

Chaukhat frame of doors & windows of Mild steel or iron work of small size and section such as holdingdown bolts, holdfast, tie roads, grating etc

Grill of 10 mm.bar in window (In mesh of 1 x1 m). including all cost of materials labours t&p etc.

Cement plaster 1:4 C.M. of 12mm thick and approved sand mortar 1:4 in walls i/c washing and cleaning and supplying of all materials, labours, T&P etc.required for proper completion of work.

Cement plaster 1:3C.M. providing 12 mm thick cement and approved sand mortar in ceiling including washing and cleaning and supply of all cost of materials , labours T&P etc.

Providing and fixing ISI marked flush doors shutters conforming to IS: 2202 (Part 1) Decorative type core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters.(35 mm thick including ISI marked stainless steel but hinges with necessary screws).

Fixing plain glass with Atul or equivalent ISI markd quality putty .Brads and springs complete including cost of material and labour etc(3.8 to 4.7 mm thick)

Supplying and fixing galvanized mosquito proof heavy quality iron wire gauge of expanded metal over windows And ventilator including sheesham wood batten with screw and supply of all cost of materials, labours,T&P etc.

Providing and applying plaster of putty 2mm thicknss over plastered surface to prepare the surface een and smmoth complete. Including cost of all material labour and T & P etc.

Finishing wall with water proof cement paint of approved make and quality on work with two coat to give and even shade I/C the supply of all materials ,labors T&P etc.

Distamper , one primary coat and two coat oil bound distamper (O.B.D.) on work including supply of all materials, labors, T&P. etc.

Painting and varnishing of new iron frame of doors, wi ndows, and grills after priming. i/c all cost of materials, labours,T&P etc.

Providing and laying vitrified floor tiles of size 60 x 60 Kajaria Kerro are equivalent brand of super quality (Thickness specified by manufacturer) i/c coarse sand working and the joints finishing with materials labor tools etc.

Supplying and fixing 6mm thick CHINA white glazed tiles in flooring /skirting or dado with 1:3 CM in kitchen and toilet.

Providing and fixing G.I. Metal false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section.

Supplying and fixing of main Steel Gate of I.H. Campus including Belding, all materials, labour tools T&P etc

Supplying and fixing solar lite system as per market rate. i/c all cost of materials, labous t&p etc.

Wiring points for light with 1.5 sq mm. FR PVC Insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth wire drown inside.

Same as item no (29) but for two ways light point

Same as item no (29) but for fan and light duty exhaust fan point

Same as item no (29) but for fan and light duty exhaust fan point

Addition for light / fan points with modular type switch in place of piono type switch.

Addition for 2 way light points with modular type switch in place of piono type switch.

Addition for plug points with modular type switch in place of piono type switch.

Supply & wiring of submains with 2 no. 2.5sq mm.& with 1 no.earth wire of 1.5 sq .mm. FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete , including supply of all material, labour and T&P etc.required for proper completion of the the work as directed by engineer in charge.

Supply & wiring of submains with 2 no. 4sq mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wal and partly laid in slab along with one no. 2.5 sq. mm.FR PVC insulated multistranded copper conductor.

Supply & wiring of submains with 2 no. 6sq mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy duty PVC conduit partly concealed in wal and partly laid in slab along with one no. 4.0 sq. mm.FR PVC insulated multistranded copper conductor.

Supply & wiring of submains with 2 no. 10sq mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy duty PVC conduit partly concealed in wal and partly laid in slab along with one no. 6.0 sq. mm.FR PVC insulated multistranded copper conductor cable as earth continuity wire drown in conduit.

Supply & wiring of 4no. 10sq mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 3.2 mm dia in heavy duty (2mm thick) PVC conduit with 2no.6sq.mm. FRLSH PVC insulated copper conductor cable as earth continuity wire drown in conduit. (4 x 10 sq.mm.)

Supply & wiring of submains with 4 no. 16sq mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy duty PVC conduit partly concealed in wal and partly laid in slab along with one no. 10 sq. mm.FR PVC insulated multistranded copper conductor cable as earth continuity wire drown in conduit (4 x 16 sq.mm)

Erection and testing of ceiling fan and regulator for room height up to 3.60 mts. Including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.

Erection and testing exhaust fan on the ex hole with sutable size of rag bolts ,nuts and washers etc. complete in all respects.

Supply and fixing of hexagonal/Round G.P.fan box with of approved make made up of .1.0 mmthick ISI Marked G.P. sheet spot welded Four to Eight holes of 25.4 mm. for pipe entry of the box. .Holes should be semi- shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coated M.S.Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concerning alng with supply of all material, labour. T&P etc. required for proper completion of the work.

Supply and fixing of electronic fan regulator 120-280 v. ISI Marked on the existing switch board i/c making connection , required material,labour T&P etc. for proper completion of the work to the satisfaction of engineer in charge of work.

Supply and fixing of single light wall bracked on matching M.D.F.E.G. board base etc. complete in all respect . Cat A A A

Construction of recess of 600mm x 480mm x 200mm size of main board, distribution boards of all sizes i/c cutting of brick work providing lintel of suitable size and thickness plastering etc. with supply of all materials, laboure T&P required for proper completion of work.

Supply and fixing of factory fabricated M.S.box in existing sunk with Godrej type almirah cover with handle with etc. fabricated from 18 SWG (1.25MM) M.S. sheet duly painted with red oxide primer followed by two coat of synthetic enamel paint complete with necessary conduit entry and D.P./ T.P.N. fixing arrangements and provision for compartment for loose wires openable housing on the top and hold fast etc. i/c supply of all material , labour, T&P etc. required for proper completion of the work. Size 600 x 480 x 200 mm.

S & F surface / Flush mounting 6 ways TPN distribution board without additional board without MCB complete in all respect as directed at site by Engineer in charge. CAT A

S & F of 6 Amp to 32 Amp. SPMCB (10KA) C Curve CAT A

S & F of 40Amp 4 Pole MCB (10KA) CAT A

S & F of 63 Amp 4Pole MCB (10KA) CAT A

Supply and fixing of power plug with 15 A/250 Volt flush type switch and 5 pin 15 A/250 Volt flush type universal socket in suitable M.S.box of 175mm x 100mm x 50mm size with phenolic laminated Bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

S & F sheet steel enclosure surface /Flush mounting fitted with 20 Amp. 2pin and earth metal clad scraping earth plug and socket complete in all respect as directed at site by Engineer in charge. CAT A

S & F single pole MCB blanking plate CAT A

Supply and burying of 600mm x 600mm x 6mm G.I plate vertically for earthing with its top at least 3metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from apron to switch board the cost of G.I.pipe and G.I. wire will be extra ) 30 cm square C.I. frame with hinged cover masonery housing alternate layers of charcoal/ coke and salt at least 150mm thick alround etc. as per direction of Engineer –in –charge complete in all respect.

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

Supply & fixing of two numbers 8 SWG G.I. wire for earthing purpose as required complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 bolts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and procted with brunt bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc. o suitable size sl n. 501(m) 70 sq.mm 3-1/2 core

Supply and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 bolts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and procted with brunt bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc. o suitable size sl n. 501(m) 10 sq.mm 2 core

Supply and fixing of plaine brass nickle plated compression gland for PVC insulated and armoured, served, sheathed underground cable i/c rubber ring etc. complete in all respect . The armouring of the cable shall be properly connected with the earth as per direction of Engineer in charge. Sl no/ 503 (m) 70 sq.mm 3-1/2 core

Supply and fixing of plain or pin type copper tin plated cable socket (lug ) to the cable leads insulating with tape and making connection etc. complete in all respect as per direction of the Engineer- incharge. 35 sq.mm

Supply and fixing of plain or pin type copper tin plated cable socket (lug ) to the cable leads insulating with tape and making connection etc. complete in all respect as per direction of the Engineer- incharge.70 sq.mm

I- SANITARY INSTALATION & C.P. FITTINGS.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron p or s trap , 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware / Hindware / Seabird/Orient (Coral) with all fittings and fixtures complete i/c cutting and making good the walls and floors wherever required.– White vitreous China Orissa pattern w.c. pan of size 580 x 440 mm with integral type foot rests.

Providing and fixing white vitreous China pedestal type water closet (European type w.c. pan ) with seat and lid, 10 litre low level white P,V.C. flushing cistern with manually controlled device (handle lever ) conforming to IS: 7231, Parryware / Hindware / Seabird/Orient (Coral) with all fittings and fixtures complete i/c cutting and making good the walls and floors wherever required. W.C.pan with ISI marked black solid plastic seat and lid.

Providing and fixing white vitreous China flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap. of standerd pattern i/c cutting and making good the walls and floors wherever required.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fitting complete. Semi rigid pipe 32 mm dia.

Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (approval quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screwes and washers complete

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm with white P.V.C.automatic flush cistern, with fittings standerd size C.P. brass flush pipe,spreaders with unions and clamps (all in D.P.brass) with waste fitting as per IS:2556,CI trap with outlet grating and other coupling in C.P. brass i/c painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 ltre P.V.C.automatic flushing cistern.

Providing and fixing stainless steel AISI 304 (18/8) kitchen shink as per IS 13983 with CI brackrts and stainless steel plug 40 mm i/c painting of fittings and brackets,cutting and makinggood the walls and floors wherever required Kitchen shink with drain board 510 x 1040 x mm bowl depth.

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approval quality conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approval quality conforming to IS standard and weighing not less than 690 gms 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 15 mm nominal bore

Providing & fixing soil waste and vent pipes 100 mm dia centrifugally cast iron S & S pipe

Providing & fixing soil waste and vent pipes 75 mm dia centrifugally cast iron S & S pipe

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters 100mm

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters 75mm

Providing & fixing M.S.. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) Iron S & S pipe embedded in & including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc for 100mm dia pipe

Providing & fixing M.S.. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) Iron S & S pipe embedded in & including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc for 75mm dia pipe

Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors 100mm inlet & 75mm outlet

Providing & fixing cast iron coller 100mm dia

Providing & fixing cast iron coller 75 mm dia

Providing and fixing plain cast iron S & S sanitary bend 100mm dia

Providing and fixing plain cast iron S & S sanitary bend 75mm dia

Providing and fixing centrifugally cast iron single equal plain junction of required degree 100x100x100mm

Providing and fixing centrifugally cast iron single equal plain junction of required degree 75x75x75mm

Providing and fixing cast iron terminal guard 100mm

Providing and fixing cast iron terminal guard 75mm

Providing and fixing on wall face unplasticised –rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion 110mm

Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1cement : 4 coarse sand ) and making good the wall etc. Complete 110mm

Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size ) over PVC sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3(1cement : 3 coarse sand ) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply i/c all CPVC plain and brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge.

(a) 32mm dia nominal outer dia pipes

(b)25mm dia nominal outer dia pipes

Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).25mm dia nominal bore

Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work)32mm dia nominal bore

Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work)40mm dia nominal bore

Painting GI pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approval quality for new work 25mm dia nominal bore

Painting GI pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approval quality for new work 32mm dia nominal bore

Painting GI pipes and fittings with synthetic enamel paint over a ready mixed priming coat, both of approval quality for new work 40mm dia nominal bore

Providing and fixing GI Union inGI pipes including cutting and threading the pipe and making long screws etc. complete (new work) 25mm dia nominal bore

Providing and fixing GI Union inGI pipes including cutting and threading the pipe and making long screws etc. complete (new work) 32mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality 25mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality 32mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality 40mm dia nominal bore

Providing and placing on terrace (at all floor levels) polythene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitcase locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank .[Sintex, Electroplast, Star, Lotus, or equivalent having valid ISI license]

Excavating trenches of required width for pipes, cables, etc. Including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within lead of 50m Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.

Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1(1 cement : 1 fine sand) including testing of joints etc. complete 100mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design 100mm dia SW pipe

Providing and fixing square-mouth S.W. gully trap grade ‘A’ comlete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With sewer brick conforming to IS : 4885

Providing and laying cement concrete 1:5:10 (stone aggregate 40mm nominal size) up to the hounches of pipes i/c bed concrete as per standerd design 50 mm dia R.C.C. Pipes

Providing M.S. foot rests i/c fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (stone aggregate 20 mm nominal size) as per standerd design With 20 x 20 mm square bar

M/S BABA TRADERS

M/S CHANDRA CONSTRUCTION CO