Construction of residential Apartments for PRIs/ Protected Persons at Watapora Bandipora

Amount

Clearance off site inclusding disposal of debries beyond limits in eco friendly manner complete as desired by the site Engineer

Earth work in bulk excavation by mechanical means (Hydraulic Excavator) (over areas exceeding 30 cm in depth, 1.5mtr in width as well as 10sqm on) plan dressing of sides and ramming of bottom including disposal of excavated earth lead up to 50mtrs and lift up to 1.5mtr or as directed by thw site Engineer (all kinds of soil)

Providing and laying of stone solling on level (hand packed) watering, ramming complete incluidng all carraiges leads and lifts

Providing and laying cast in situ of concrete work of nominal mix concrete M7.5 Grade (1:4:8) nominal maximum size of stone aggregate 40mm volumetric batching up to plinth level including curing but excluding form work costs including all carriages , cost of materials involved complete

Providing and laying cast in situ of concrete work of nominal mix concrete M15 Grade (1:2:4) nominal maximum size of stone aggregate 20mm volumetric batching up to plinth level including curing but excluding form work costs including all carriages , cost of materials involved complete

Cement concrete (Cast-IN-SITU) Providing and laying in position cement concrete of specified grade M 10 including curing but excluding the cost of centering and shutttering. All work up to plinth level with 1:3:6 ( 1cement concrete : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including all costs and carriages of material involved complete

Providing and laying machine betched and machine mixed design mix M-20 grade (1:1.5:3) concrete for reinforced cment concrete work, using cement content as per approved designmix, including pumping of concrete, shuttering finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to acclerate, retard setting of concrete, improve workability with out imapiring a strength and durability as per directions of engineer Incharge Note:- cement in this item is @ 330kg / cum excess or less cement used as per design mix content cosidered payable or recoverable separately including all carraiges of materials involved complete (a) All works up to plinth (Raft)

(b) In walls (any thickness) including attatched pilaters, butresses, plinth and string courses, fillets, columns, pillars, piers, abutments,posts and struts up to floor five level

(c) In suspended floors, roofs having slope up to 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral satir cases up to floor level

Reinforcing steel Providing, assembling and placing high strength deformed steel bars of FE 500D grade (Conforming to IS 1786-1985) for RCC work including cost of binding wires in foundation, plinth, lintals, slabs, columns etc including all carraiges, leads and lifts

Centering and shuttering including strutting, propping etc and removal of form work including all carraiges, costs of materials involved complete for:- (a) foundations, footings, bases of columns for mass concrete

(b)Walls (any thickness) including attatched pilasters, buttressses, plinth and string course etc

(c)Suspended floors, roofs, landings, balconies and acess platforms

(d)Lintel beams, plinth beams, girders, bressumers and cantilevers

(e)Column / pillars

(f)Stairs (slopping / steps / sides)

(g)Edges of slabs and breaks in floors and walls

Back filling in plinth in layers not exceeding 20cm in depth by the available earth complete

P/L granular sub base coarse with nallah aggregate size 90mm including ramming, dressing, watering, underflooring in rooms including all carraiges

Brick work with FPS bricks of level class designation 75 in Superstructure up to floor V: in cement mortor 1:6 ( 1 cement: 6 coarse sand) including all costs and carriages of materials involved complete

Extra for brick work in superstructure

Half brick masonary with bricf class designation 75 in foundation and plinth incement mortor 1:4 mix (1cement: 4 ciarsand sand) including all costs and carriages of materials involved complete.

Extra for brick work in superstructure

12 mm thick cement sand plaster 1:6(1cement: 6 fine sand) on external surfaces (walls) including cost and carriage of all materials, combing and curing complete

12 mm thick internal cement sand plaster 1:4(1cement: 4fine sand) on interior side of bath room including cost nad carriage of all materials, combing and curing complete

15 mm thick internal cement sand plaster 1:6(1cement: 6fine sand) on rough side of brick work including cost nad carriage of all materials, combing and curing complete

6 mm thick internal cement sand plaster 1:3(1cement: 3 fine sand) to ceiling including cost and carriage of all materials, combing and curing complete

Providing and applying white cement based putty of specified thicknesss of approved brand and manufacture over the palstered wall surface to prepare the surface even and smooth complete including all costs and carriages of materials complete

Providing and applying POP 2mm thick over the palstered wall surface to prepare the surface even and smooth of approved brand and manufacturer complete including all costs and carriages of materials complete

Providing and applying cement based wall primer (ready mixed) of approved manufacturer two or more coats on new work to prepare the surface for painting including all costs and carriages of materials involved complete

Finishing walls with textured exterior paint of required shade on new work (two or more caots applied @ 3.28 liter/Sqm) over already base coat of exterior primer applied @ 2.20kg / 10sqm including all costs and carriages of materials involved complete

Finishing walls with epoxy paint (2 or more coats) at all locations, prepared and applied as per manufactures specifications including appropriate priming coat, preparation of surface on exterior walls including all costs and carraiges of material involved complete

Painting wood work with delux multisurface of required shade as per the consultant (two or more coats) applied @0.90litre/10sqm over an under coat of primer applied @0.75litre/10sqm of approved brand and maufacturer including all costs and carraiges involve

Providing and laying Water proofing treatment in sunken portions of WC's, bath room etc by applying cement slurry mixed with water proffing cement compound consisting of (a) Ist layer of slurry of cement @0.488kg/sqm mixed with water profing cement compound @0.253kg/sqm. This layer will be alowed to air cure for four hours (b) second lyaer of slurry of cement @.242kg/sqm mixed with water proffing cement compound @0.126kg/sqm. This layer will be allowed to air cure for four hours followed with water curing for 48 hours including all costs and carriages of materilas involved complete

Providing and applying cement concrete flooring (40mm thick) in 1:2:4 mix (1cement: 2coarse sand: 4 graded stone aggregate size 20mm) finished with a floating coat of neet cement including cement slurrybut excluding the cost of noising of stepos etc including all costs and carriages of materials involved complete

Providing fixing glass strips in joints of taarazoo/ cement concrete flooring 40mm wide and four mm thick including all costs and carriages of material involved complete

Providing and laying vetrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than .08% and conforming to IS 15622 of approved make in all colors and shades, laid on 20mm thick cement mortoir 1:4 mix (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc complete (size of tile 60x60cm) including all costs and carriages of material involved complete

Providing and fixing gang saw cut mirror polished (premoulded and pre polished) machine cut for kitchen paltform, vanity counters, window sills and similar locations of required size of aproved shade, colour and texture laid over 20mm thick base cement mortor 1:4 (1cement: 4 coarse sand) with joints treated with white cement , mixed with matching pigment, epoxy touchups including rubbing, curing, moulding of edges and polishing to edge to give glooos finish etc complete at all levels, (granite of any colour shade 18mm thick) including all costs and carriages of material involved complete.

Extra for providing double moulding in treds of stairs including cost of spacer, granite stone (50mm wide) moulding and polishing

Providing and fixing of ist class ceramic glazed wall tiles in bath rooms conforming to relevant IS codes (thickness to be approved by manufacturer) of approved make in all colour shades except burgandy, bottlegreen and black of any size as approved by the consultant in skirting, riser of steps and dodos laid over 20mm thick bed of 1:3 cement mortor (1cement : 3 coarse sand) and joining with grey cement slurry@ 3.3kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Cement tiles up to 6'' on walls) including cost of cement, curing and all carriages.

Providing and fixing of antiskid ceramic glazed tiles in flooring laid over 20mm thick bed and joining with grey cement slurry including pointing in white cement mixed with pigment of matching shade with base f 1:4 cements mortor (1 cement : 4 coarse fine sand) including cost of cement, curing and all carraiges. In colour such as white,, Ivory, Grey, Fume red brown including all carraiges leads and lifts

Providing and fixing of kail wood work in frmaes of doors, windows, celerestory windows and other frmames, wrought frammed and fixed in position including all costs and carriages of materials involved complete

Providing and fixing 35mm thick factory made solid core flush door shutters, core of block baord constrcution confirming to Is code with frame of Ist class hard wood and well matched commercial ply and limination of approved make and shade on both faces of shutters including hardware items and all costs and carriages of materials involved complete

Providing and fixing PVC factory made white colour casemate sliding windows and door made of exruded profiles, profiles of frames and sash will be mitted out and fusion welded at all corners incld driiling of holes for fixing hardware and drainage of water etc, making arrangment for fixing hardware, EPDM Gasket, 1.2-0.2 mm thick galanvnised steel profile reinforcement, to be inserted in required profile, frame will be fixed to the wall with 8mm x100 mm long fasteners, all complete as per drawing and directions of Engineer in charge( incld glazing , hardware,hinges etc A) Sliding window having one side fixed and one part sliding with fixed SS Mosquito Mesh incld 5mm thick glass, all hardware fittings and locking arrangement 1- track outer frame 77 mm x62 mm such 68x6442 mm T transion million 80x42 mm having wall thickness 2.5mm

Providing and fixing PVC factory made white colour casemate sliding windows and door made of exruded profiles, profiles of frames and sash will be mitted out and fusion welded at all corners incld driiling of holes for fixing hardware and drainage of water etc, making arrangment for fixing hardware, EPDM Gasket, 1.2=0.2 mm thick galanvnised steel profile reinforcement, to be inserted in required profile, frame will be fixed to the wall with 8mm x100 mm long fasteners, all complete as per drawing and directions of engineering in charge( incld glazing , hardware,hinges etc B) Casment window all openable (with friction hinges, inword opening and handle lock, 5mm thick glass , casement frame 62mm x62mm, inword open door sash 110 mm x 90mm, glazing bead 38.5x20mm, T Transon Million 80x62 mm having wall thickness 2.5mm

Providing and fixing 3.5 mm thick glazing in fixed windows/doors incld wooden beeding complete

Providing and fixing 40x5mm iron hold fasts 40cm long incld fixing to frame with 10mm dia bolts, nuts and wooden plugs embedding in cement concrete blocks 30x10x15 CM in 1:3:6 mix with 20mm nominal stone aggregate

Providing and fixing Dash Fastners of required dia and length for fixing wooden frames to RCC works

Providing fixing aluminum tower bolts ISI Marked Anadosied (anodioc coating not less grade AC 10 as per IS 1868 transparent or diyed to required colour or shade with nuts and screws a) 150x10 mm

Providing fixing aluminum door stopper Marked Anadosied (anodioc coating not less grade AC 10 as per IS 1868 transprent or diyed to required colour or shade with nuts and screws a) 150x10 mm

Providing fixing aluminum sliding door bolts Marked Anadosied (anodioc coating not less grade AC 10 as per IS 1868 transprent or diyed to required colour or shade with nuts and screws a) 300x16mm

Providing and fixing aluminium handles ISI marked transparent or dyed to required colour and shade with necessary screws etc complete (150mm long) including all costs and carraiges involved complete

Providing and fixing stainless steel railing (grade 304) of height up to 36'' to stair ramps landing etc including vertical and horizantal members and hand rails of 50mm dia as per approved pattern including cutting of garnite / floor and fastening, grouting complete. including all costs and carraiges involved complete

Providing and fixing stainless steel 100 mm dia master piller inlcuding base / top ball of standard sizeIncluding all carraiges and costs of materials involved complete

Structural steelwork welded in built up sections and hollow tubular sections / trusses / bracngs / frammed work including cutting, hoisting, fixing in position and applying a primer coat of approved steel primer etc as required for bracing / roof works including all carraiges leads and lifts

Providing / fixing colour coated track deck sheet and fixing with polymer coated J or L hooks bolts overlapping of sheets up to pitch of 60 degrees) excluding the cost of purlins rafters and trusses including all costs and carriages of material involved complete

Providing and fixing almunium composite sheet caldding (exterior grade) in vertical / horizantle surface using 4mm thick sheet (Aluco Bond)sheet propriatory make / trade mark. The shall be bent to shaped profiles as required including parimeter extrusion base frame extruded stiffeners 2.5 to 3mm, SS expension fasteners and Silcon sealant (Dow/Corning 789) all back up arrangements required for installation as per approved Architectural Elevation drawings) including all catrraiages and costs of materials involved complete.

Providing and fixing 19mm thick (water proof) marine ply of approved brand in Kitchen Counters, cabinets, shelves , drawers etc all shutters and edges of visible sides of 19mm ply shall be fixed with 15mm thick hard wood margin, all exposed faces inside as well as out side have to be finished with limination (thickness 1mm minimum) of approved shade and make including all hardware fittings, channels, cover flits, mouldings etc as per drawing CEntury, Jeera, Premier, Duha or equalant including all costs and carriagfes of materials involved complete. (a)Over head cabnets 300mm deep

(b) Under counter cabnits 575mm deep

Providing and fixing stainless steel dish rack set of two shelves with tary to be fixed oiver sink including all fitting 700mm x300mm size of approved brand like Ebco, Morff, G-storb or equalant brand including all catrraiages and costs of materials involved complete.

Providing and fixing stainless steel cup and sauser basket including all fitting 15''x20''x4'' size of approved brand like Ebco, Morff, G-storb or equalant brand including all catrraiages and costs of materials involved complete.

Providing and fixing 19mm thick ply of approved brand in wardrobes shelves, drawers etc all shutters and edges of visible sides of 19mm ply shall be fixed with 15mm thick hard wood margin and 6mm thick ply on back, all exposed faces inside as well as outside have to be fnished with lamination of approved shade and make including all hardware fittings, channels, cover flits, mouldings, SS hanger rod and looking mirror and drawer as per drawing (600mm deep) including all carriages and costs of materials involved complete.

Providing and fixing 25mm dia ss curtain rod with brakets and end caps of approved make including all carriages and costs of materials involved complete.

Random ruble masonary with hard stone in all levels and plinth including levelling up with cement concrete 1:6:12 I1cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) up to plinth level and curing complete with cement mortor 1:6 (1 cement : 6 coarse sand) including all costs and carraiges involved complete

Random ruble masonary laid dry with hard stone in all levels and plinth including all costs and carraiges involved complete

Sanitary P/F 3 layer PP-R (Poly Propylene Random Copolymer) pipes SDR 7.4 UV satblized and anti-microbial fusion welded, having termal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer Incharge (Concelaed work including cutting chases and making good the walls etc) including all costs and carriages of materials involved complete. PN-16 pipes, 25 mm OD

P/F 3 layer PP-R (Poly Propylene Random Copolymer) pipes SDR 7.4 UV satblized and anti-microbial fusion welded, having termal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer Incharge (Internal work exposed on wall) including all costs and carriages of materials involved complete. (a). PN-16 pipes, 32 mm OD

(b) PN-20 pipes, 40 mm OD

P/F 3 layer PP-R (Poly Propylene Random Copolymer) pipes SDR 7.4 UV satblized and anti-microbial fusion welded, having termal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer Incharge eXternal work including trenching, refilling etc. including all costs and carriages of materials involved complete. (a). PN-16 pipes, 40 mm OD

(b) PN-10 pipes, 40 mm OD

providing and fixing P.V.C soil,Water,Rain,waterpipes,ventpipes medium class ISI mark including all fitting with out access of any degree i.e bends,junction,cowls,offsets,access pieces,holder bats and structure steelfabricated supports,clamps for suspended pipes in ceiling,stays,through duts,etc and joining with solvent/seal joints including holes in walls and floors. (a)100 mm dia

(b)150mm dia pipe

Providing and fixing of 40mm dia PVC pipe medium class ISI Mark complete with fittings, clamps including cutting and making good the walls and ceiling for waste pipes, bath wastes, overflow, kitchen equipment waste connections and condensate drainage, as directed by the Engineer I/C.

Proiding and fixing PP-R ball valve of full flow with of superior quality (a) 40mm dia

(b)32mm dia

©25mm dia

Providing and laying allround cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 stone aggregate 20mm down guage) 75 in bed and pipe (a) For 100 mm and 150mm dia pipes under floor including centering and shuttering wherever required.

Providing and fixing of PVC floor trap 100mm dia including cost of cutting and making good the walls and floors wherever required.

Providing and fixing of water closet squatting (Indian type WC pan) with 100mm PVC or S trap, 10ltr low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. (a). White vitreous China Orrissa pattern WC pan of size 580x440mm with integral type foot rests .

Providing and fixing white vitreous china pedestal type water closet (European type WC pan) with seat and lid, 10ltr low level white PVC flushing cistern, including flush pipe, with manually controlled devie (handle lever), conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. (a) WC pan with ISI marked white solid plastic seat and lid

Providing and fixing first quality white vtreous china flat back washbasin size 550x 400 mm with C.I/M.S brackets painted with two or three coats of enamel paint of approved shade over a coat of primer ,C.p. brass waste and coupling chain and rubber plug, P.v.C Flexible waste pipe c0mplete Including cuttiong and making good the walls wherever required.Flat back wash basin size 550x400mm

Providing and fixing vitrious china pedsetal for wash basin completely recessed at the back for the reception

Providing and fixing 15 mm dia C.P brass angle valve with C.P brass wall flage of approved make complete including cutting and making Good the walls wherever required.

Providing & Fixing 600x20 mm C.P brass towel rail of approved make with C.P brackets fixed to wooden cleats with C.P brass screws etc. including cutting and making good walls wherever required .

Providing & fixing C.Pbrass Soap Dish /Tray of apprpoved make including screws completely

Providing & fixing C.p brass tambler holder approved make including Screws complete.

Providing & Fixing SS coat hooks strip ( plate type 6 hook 300-400mm) fixed with PVC rawal plug and C.pbrass screws including cutting and making good the walls wherever required.

Providing & fixing C.P brass single hole Mixer of approved make for wash basin of approved make including cutting and making good the walls wherever required

Providing & fixing C.P brass non-telephonic wall Mixer of approved make including cutting & making.

Providing & fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink As per IS 13983 with C.I brackets And Stainless steel Plug 40 mm including painting of fittings brackets , cuttinfg And making Good the walls wherever required Kitchen sink without drain board ,610x510mm b0wl depth 200mm

Providing & Fixing C.P brass towel ring fixed to rawal plug with C.P brass Screws . Heavy type

Providing & Fixing OF Health faucet with shower and flexible connection 1.20mtr long of approved brand complete.

Providing & Fixing C.P brass sink mixer of approved make swinging casted spout wall mounted complete including cutting and making good the walls wherever required.

Providing & Fixing of 600x 120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass and brackets and guard rail complete fixed with 40 mm long scfrews, rawl plugs, etc complete.

Providing & Fixing of 600x450mm bevelled edge mirror of superior glass (of approved quality) complete fixed to PVC rawal plug with C.Pbrass Screws and washers complete.

Providing & Fixing of 15mm dia PVC connection 600mm long including end union and washers complete.

providing, fixing , installation,commissioning amd testing Hot Geyzer of approved make including fixing with bolts/fastners (venus,Recold ,Jacquar, Crompton) (a) 50 lt capacity

(b) 20 ltr capacity

Providing &Fixing C.P /Stainless steel anti cockroach trap (grating) on Floor traps and floor drains with cement mortar, complete in all respects, 100 mm dia

constructing brick masonry manhole with 75class designation bricks in cement mortar 1;4 (1 cement; 4 coarse sand),200mm thick foundation concrete 1;4;8 mix (1 cement;4 coares sand ;8 graded stone aggregate 40mm nominal size) ,inside and plastering 12mm thick with cement mortar 1;3 (1 cement;3 coarse sand,)finished with a floating coat of neat cement inside and rough plaster on outsude and making channels in cement concretye 1;2;4 mix (1cement ;2 coarse sand ; 4 graded stone aggregate20mm nominal size ),neatly complete as per standard design including excavation,refilling and disposal of surplus earth. (a)Inside dimentions 455x610mm x45cm deep for single pipeline

(b) inside dimensions 500x700mm and 45cm deep for single pipe line with one or two inlets.

Providing&Fixing SRFC Manhole covers 600mm dia heavy duty

Providing & Fixing C.P brass tape long body of approved make including cutting and making good the walls wherever required.

Providing Over head PVC Storage tank 3 layer ISI mark of approved make including allied tank fillings such as tank nipples etc making of necessary connections complete. OHT 3000+ ground storage

Supplying ,Installation, testing and commissioning of Submergable water pumps 2HP including panel and all fittings and fixtures complete.

Compound Walling Earth work in excavation by manual means intrenches for foundations, drains, pipes, cables etc (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift up to 1.5m, including getting out excavated earth and disposal of surplus excavated earth as desired

Providing and laying of stone solling size on level (hand packed) watering ramming complete incluidng all carraiges leads and lifts

Providing and laying cast in situ of concrete work of nominal mix concrete M7.5Grade (1:4:8) nominal maximum size of stone aggregate 40mm volumetric batching up to plinth level including curing but excluding form work costs including all carriages , cost of materials involved complete

Cement concrete (Cast-IN-SITU) Providing and laying in position cement concrete of specified grade M-10 including curing but excluding the cost of centering and shutttering. All work up to plinth level with 1:3:6 ( 1cement concrete : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including all costs and carriages of material involved complete

Providing and laying machine betched and machine mixed design mix M-20 grade (1:1.5:3) concrete for reinforced cement concrete work, using cement content as per approved designmix, including pumping of concrete, admixtures in recommended proportions as per IS 9103 to acclerate, retard setting of concrete, improve workability with out imapiring a strength and durability as per directions of engineer Incharge Note:- cement in this item is @ 330kg / cum excess or less cement used as per design mix content cosidered payable or recoverable separately including all carraiges, materials involved complete (a) All works up to plinth (Raft)

Reinforcing steel Providing, assembling and placing high strength deformed steel bars of FE 500D grade (Conforming to IS 1786-1985) for RCc work including cost of binding wires in foundation, plinth, lintals, slabs, columns etc including all carraiges, leads and lifts

Centering nad shuttering including strutting, propping etc and removal of form work including all carraiges, costs of materials involved complete for:- (a) foundations, footings, bases of columns for mass concrete

(b)Column / pillars

(c)Suspended floors, roofs, landings, balconies and acess platforms

Brick work with FPS bricks of class designation 75 in Superstructure up to floor V level: in cement mortor 1:6 ( 1 cement: 6 coarse sand) including all costs and carriages of materials involved complete

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel for gates / wicket gate etc including all carriages involved

Providing laying 50mm thick cement concrete copping in 1:2:4 mix (1cement: 2 coarse sand: 4graded stone aggregate 20mm nominal size) using crusher aggregate including all cost and carraiges of materials involved complete

15 mm thick cement sand plaster 1:6 mix (1cement: 6fine sand) on rough side of brick work including cost and carriage of all materials, combing and curing complete

Providing laying (50mm) thick cc flooring in 1:2:4 mix (1cement: 2coarse sand: 4 graded stone aggregate 20mm nominal size) crusher including all carraiges involved complete

Approach Road Suppkly and filling of GSB / RBM including dressing watering and consolidation with PRR 8-10ton capoacity incuding all carriages involved complete

Providing laying WBM G-II with specified stone aggregate (63-45mm size) including stone screening of 13.2mm and binding material including consolidation with PRR of 8-10ton capacity and carrauges up to site of work complete (crusher aggregate)

Providing laying WBM G-III with specified stone aggregate (53-22.5 mm size) including stone screening of 11.2mm and binding material including consolidation with PRR of 8-10ton capacity and carrauges up to site of work complete (Crusher aggregate)

GHULAM JEELANI BHAT