Renovation and Upgradation of Water Testing Laboratory Kandaghat District Solan HP Sub Head _ Construction of Bacterilogical Room at Kandaghat under DWSM LAB CARPET AREA OF 52.25 SQM

Amount

Providing and laying cement concrete work using concrete mix of "M-20" graded stone aggregate 20mm & down gauge nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

Plinth/Seismic beam

Columns,pillars,posts & struts upto floor two level.

Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level.

Lintels, beams ,griders bressumers and cantilevers upto all floor level.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.

Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters,buttresses,plinth & string courses & the like.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness.

Beams,cantilevers,girders & lintels, sides & soffits of beams, haunching, cantilevers, bressumers 1.00 mts. In depth in all heights from floor.

Edges of slabs and breaks in floors & walls under 20 cms. Wide.

Columns,pillars,posts & struts upto floor two level.

Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.

Providing and Fixing anodised aluminium work (JINDLE MAKE) for door,window,ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868.(minimum anodic coating of grade AC 15) fixed with rawl plug and screws or with fixing clips,or with expansion hold fastener including necessary filling up of gaps at junctions at top,bottom and sides with required PVC.neoprene felt etc. Aluminium section shall be smooth rustfree,straight,mitred and jointed mechanically where ever required including cleast angle,aluminium,snap beading for glazing/panelling C.P. brass/stainless steel screws . All complete as per architectural drawings and the directions of Engineer-in-Charge.

Providing and fixing anodized aluminium shutters of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)

Providingand fixing anodised alluminium wire gauge shutters for doors and windows

Providing and Fixing 10mm thick anti skid water proof stain and impact resistance heavy duty vetrified tiles (NITCO or equivalant make) 600x600mmx10mm manufactured of approved shade and colour in flooring,treads of steps and landings laid over 12mm thick cement mortar 1:3(1 Cement :3 Sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) within all leads and lifts.

6 mm cement plaster to ceiling in CM 1:4 (1Cement :4 Sand)

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth in all leads and lifts.

Providing under layers for plinth protection of 75 mm thick( unconsolidated) bed dry brick / stone aggregated 40 mm nominal size will rammed & consolidated & grouted with fine sand including preparation of gruond.

Providing Tor steel reinforcement for RCC work including bending,binding & placing in position complete upto floor two level.

Steel work welded in built up sections, including cutting sections, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In gretings, framed guards, bars ladders railings brackets and similar works

Providing/Fixing 0.60mm thick prepainted steel sheet (TATA make)in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge .

Gypsem Board Ceiling (50 Sqm)

Providing/Fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel (TATA make) sheets in roofing with hut dipped metallic zinc coated sheets with top coat of regular modified polyesters organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia prepainted G.I. limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge.

White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts.

Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials.

Providing and fixing M.S.fan clamp (Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size.

Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete

(a) Sliding door bolts 250x16mm.

(b-i) M.S. tower bolts (Barrel type) leads and lifts. 200x10mm.

(b-ii) M.S. tower bolts (Barrel type) leads and lifts. 150x10mm.

(b-iii) M.S. tower bolts (Barrel type) leads and lifts. 100x10mm.

(c-i) M.S. handles 125mm dia

(c-ii) M.S. handles 100mm dia

Provision for Sanitization Booth with Double Door.

Provision for pre Peb Shelves

Provision for 5 No. chairs and 5 No. Tables.

Provision for 1000 liter water tank

Provision for gyser 25 liter capacity

Panasonic 1 Ton 5 Star Wi-Fi Inverter Split Air Conditioner (Copper, Shield Blu Anti-Corrosion Technology, PM 2.5 Air Purification, 2022 Model, CS/CU-NU12XKYWA, White)

Wash basin with pvc duct pipe 30-40 meter including all fitting

VINOD KUMAR

Hira singh manta

Ashok Kumar Thakur

M/S Swastika Enterprises