REPAIRS TO COMPOUND WALL, DRAIN, FENCING, GATES, HARDSTANDING AND PATHWAY AND ALLIED WORK UNDER AOR OF 1 WG AF STN UNDER GE(AF) SRINAGAR.

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. including removal of debris complete all as specified and as directed .

Material and labour for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as speciified and directed by Engr-in-Charge.

Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick wall built in CM 1:4 complete all as specified and directed.

Material and labour for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) for surface channel and drain complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced Concrete as in Columns, slab, floors (other than ground floors), beams, staircases, landing, and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and as directed.

M&L for Providing cement concrete type B-1, 1:2:4, using 20 mm graded stone aggregate, as in copings, lintels up to 1.5 m span, apex stones, bed plates, kerbs / benching to manhole etc including weathering, slightly rounded or chamfered angles and throating as directed

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L Hard core of Broken stone Boulders of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm, watered and rammed to a true surface thickness all as directed

M&L Sand filling under floors or in foundations including watering and consolidation Complete all as specified and direction by Engr-in-Charge

Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 20 graded aggregate) as in pavement/pathways, fire breakers etc shall be laid in alternate bays complete all as specified and as directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified.

Demolition of interlocking paver block of any description or thickness in path / hardstanding etc laid, bedded and pointed dry, all as specified.

M&L for screed bed 15 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified and as directed.

M&L for screed bed 20 mm thick screed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified and as directed.

Material and labour for 10mm thick vitrified parking tiles heavy duty, exterior grade, texured finished of size 400X400 mm complete all as specified and directed.

M&L for rubber molded glossy finish Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / path / hardstanding, laid over screed bed complete all as specified and directed.

Supply and laying factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required Complete all as specified and direction by Engr-in-Charge.

Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 80 mm thickness, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid in path / hardstanding complete Note:- Sand screed will be measured & paid seperatly.

M&L for filleting in any position and to any shape in cement mortar 1:3 or cement concrete 1:2:4 including all miters, stops, etc., section of fillet exc 25 Sqcm but n exc 50 Sqcm, complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as spciified and directed.

Material and labour for 100mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in flooring , laid in alternate bays and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 40 mm thick Plain cement concrete 1:2:4 type B1 ( using 20mm graded Stone aggregate) as in floor finishing cement concrete surface even and smooth with out using extra cement complete all as specified

S&F Glass dividing strips 38mm wide and 3mm thick inserted and fixed in position complete all as spd and directed by Engineer-in-Charge.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:4 complete, complete all as specified and directed by Engineer-in-Charge. Note:- Reinforcement steel will be measured & paid separately

S&F Mild steel TMT bars 8 to 10 mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Dismantling of old chain link fencing including flat iron, line wire complete all as specified and as directed.

Dismantling of RCC posts or struts embedded in concrete any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises complete all as specified and as directed.

All as per Item No. 32 above but embedded in natural ground.

Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50 m and making good surface in soft / loose soil complete all as specified and as directed.

Supply & fixing MS 10 mm dia round bar Fe-410-w (grade E-250) quality as line wire for holding chain link mesh complete all as specified and as directed.

Supply and fix in repairs MS flat iron clamp, Angle posts and struts in fencing cutting tops to shape as directed, drilling holes, notching for wire etc. Flat iron fillets (For securing chain link fencing etc) and similar work conforming to Fe-410-0, complete all as specified and as directed.

Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engg-in-charge) all as specified.

Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc. Note: (i) Supply only fencing, will be measured and paid separately. (ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.

S&F mild steel bolts screw (machine made) with hexagonal or squre head at one end and scrw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 05 to 10mm, complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, as in repair etc as directed (each line of wire to be measured)

Restraining and resecuring, barbed wire fencing of any description including making good staples, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed by the Engineer-in-Charge. Note:-Each line of wire will be measured seperatly.

M & L for preparation of new steel surfaces of any description, exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair PVC (SWR) pipe 150 mm bore, single socketed, in any length with rubber ring joints fixed wall including PVC clip complete all as specified and directed.

M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supplying, fabricating and fixing wall panelling / cladding of aluminium composite panel of any colour any type of approved shades made out of 3 mm thick aluminium composite panel material consisting of 2 mm thick mineral core sandwiched between two aluminium sheets (each 0.5mm thick ). The aluminium composite panel wall panelling / cladding sheet shall be coil coated, with Kynar 500 based PVDF lumiflon based fluoropolyer resign coating of approved colour and shade on exposed face and polymer (service) coating on the face fixed over and including base frame fabricated with aluminium square pipe of size 25 mm x 40 mm with 1 mm wall thickness including stainless steel screws, nuts bolts, washers cleats, weather silicone sealant for groove filling etc complete all as per manufacturer instruction & as directed including taking down old panelling / cladding complete all as specified.

Material and labour for structural steel work as in truss, rafter, purlin, made out of angle / Hollow pipe / tube section including jointing cleats, plates, flat iron, gusset plates, rails, braces etc conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying one coat of cement base paint, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

Supply and fix granite (of any type) (table rubbed and polished) 20mm thick machine cut, in steps, columns, jambs, pillasrs, window cill, cooking platform, walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing unserviceable granite with slab Complete all as specified and as directed.

M&L for coloured glazed ceramic tiles for wall cladding, each tile of size exc .15 sqm but not exc .27 sqm, 10 mm thick of approved pattern / designed, set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster with cement mortar 1:4 complete all as specified and directed.

Supply and fixing for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, brackets of angle for chajja , etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing conforming to Fe 290 Gde-E-165 complete all as specified and as directed

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The rate quoted shall also be deemed to include for taking down of wind ties.

S&F for pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified.

MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS

M/S BASHIR AND SONS

M/S A.R.TANTARY

M/S FAROOQ AND SONS

M/S GULAM AHMAD ABDUL SAMAD