Renovation and Supply of office accessories for smooth functioning of High Court Legal Services Committee in New High Court Building at Dhurwa, Ranchi.

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 m

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/ window/ clerestory window

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.In new bathroom door

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size : Size of Tile 600 x 1200 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:.3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with planks of sizes 14 mm thick, 1900 mm length (minimum) and 85 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4 mm thick, expanded polyethylene foam sheets having 40 kg/cum density over prepared surface. The bamboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) . Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item).With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 1176.80 SUB HEAD : 21.0 ALUMINIUM WOR

Providing, fitting and fixing 4mm thick ACP

Providing and fixing ISi marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378):100x10 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer?in-charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge:GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.:Using R1 series with frame (33 mm & above ) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre)

Providing and fixing of external wall system on Light gauge steel frame work with outer face cement boards as per standard sizes fixed with self?drilling / taping screws / fasteners @ 60 cm c/c of approved make. A groove of 2 mm to 3 mm shall be maintained and grooves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. Internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self- drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately: Outer face- Outer face having 6 mm thick fiber cement board Type A, Category-III as per IS:14862:2000 fixed on 9 mm thick fiber cement board Type A, Category-III, as per IS:14862:2000 (high pressure steam cured) Inner Face- 12.5 mm thick gypsum plaster board conforming to IS 2095:2011 fixed on 8 mm thick fibre cement board of Type B, Category-III, as per IS:14862:2000 (High pressure steam cured)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm

Carriage of materials from nearest approved source of supply including loading into truck and unloading from trucks and stacking property at work site as direction by E/I.

Sand (08KM)

Chips (22KM)

Bricks (1K+7 PKM)

Providing, fixing door shutter wooden framed by both side best quality ply and 1mm thick qater proof laminated both side pasting finishing with all material and labour all complete (including all fancy type fitting ) as per building specification and direction of E/I.

Providing, fitting and fixing upper cabinet/lower cabinet/track/book shelf/wall unit including the cost of all material and labour excluding taxes & royalties all complete as per building specification and instruction of E/I.In chairman chamber

Providing, fitting and fixing upper cabinet/lower cabinet/track/book shelf/wall unit including the cost of all material and labour excluding taxes & royalties all complete as per building specification and instruction of E/I.

Supplying fitting fixing all height wall paneling with 12mm ply wood over 50mm x 25mm aluminum section veener fininsh with all accessories all complete as per building specification and instruction of E/I

Providing, fitting anf fixing conference table with 19mm thick water proof ply and 1mm thicklaminate including all material and labour all complete as per building specification and instruction of E/I

Supply, fitting and fixing of Decor Cotton Floral Door/Window Curtains all complete as per building specification and instruction of E/I

Supply, fitting and fixing vertical blind (SRS-VERTICAL BLINDS) of approved brand and shade all complete as per building specification and instruction of E/I

Providing and applying painting with Madhubani painting of actual Length (in cm) 100 and actual Width (in cm) 40 \without framing as per building specification and instruction of E/I all complete

Supply, fitting and fixing unbranded engraved through screw brass name plate all complete as per building specification and direction of E/I

Supply, fitting and fixing of wall paper with appropriate adhesive of approved quality, brand and shade all complete as per building specification and instruction of E/I

Supply of three seater sofa of approved shade and brand as per building specification and instruction of E/I

Supply of one seater sofa of approved shade and brand as per building specification and instruction of E/I

Supply of three seater sofa of DURIAN of approved shade as per building specification and instruction of E/I

Supply of two seater sofa of DURIAN of approved shade as per building specification and instruction of E/I

Supply of Angular 1 Seater Sofa With Fabric Cover all complete as per building specification and instruction of E/I

Supply of Consortex 1 Seater Sofa With Fabric Cover ConsortexR all complete as per building specification and instruction of E/I

Supply of Modular Metal Drawer File Cabinet Pedestal all complete as per building specification and instruction of E/I

Supply steel Almirah shelving cabinets as per approved brand all complete as per building specification and instruction of E/I

Supply Unbranded Rectangular CENTRE TABLE with Commercial Block Board BWP grade Conforming to IS 1659 Top of 550mmX450mm NA (SMC1002CT) all complete as per building specification and instruction of E/I

Supply of Rectangular CENTRE TABLE with Marble Top of 1219mmX711mm as per building specification and instruction of E/I

Supply of Round CENTRE TABLE with Commercial Block Board BWP grade Conforming to IS 1659 as per building specification and instruction of E/I

Supply of Executive Table with One side pedestal unit and E.R.U as per building specification and instruction of E/I

Supply of Executive Table with Both side pedestal unit DEVENT COLLECTIONR (GRP-999) of approve shade all complete as per building specification and instruction of E/I

Supply of Revolving Chair With Arm Knee tilt Synchronic mechanism all complete as per building specification and instruction of E/I

Supply of Revolving Chair With Arm Multi-function tilt mechanism all complete as per building specification and instruction of E/I

Suply of Executive Table with One side pedestal unit FanimationR (ZXF99) all complete as per building specification and instruction of E/I

Supply of Compaq Type/Category/Class of TV set Smart TV(2) Actual Screen Size (inches) 85 LED (Light Emitting Diode) all complete as per E/I.

Supply of Sony Type/Category/Class of TV set Smart TV(2) Actual Screen Size (inches) 55 LED (Light Emitting Diode) all complete as per instruction of E/I (Excluding the cost of any connection)

Supply of Computer Intel Core i5/ Windows 11 all complete as per instruction of E/I

Supply of hp Laser Mono Computer Printers for A4 paper size) as per instruction of E/I

Supply of Canon Multifunction Machines Mfm, On Site OEM as per instruction of E/I

Supply of CIS Sheet Fed scanner as per instruction of E/I

Supply of Floor Mounted Hot and Normal Water Dispenser AtsinR (ATSIN AWC60/80/50 UV+RO Hot Provision) as per instruction of E/I

Supply, fitting and fixing of Acrylic External Branding signage board Unbranded Acrylic ExternalBranding Signage Boardsas per building specification and instruction of E/I

Supply of G.M DUSTBIN HDPE 10 Litre Foot Operated Bio-Medical Waste Collection Bin as per instruction of E/I

Supply of Wall Clocks as per building specification and instruction of E/I all complete

Providing and fixing wall mixer of approved brand as per instruction of E/I

Providing and fixing bib cock of approved brand as per instruction of E/I

Supply, fitting and fixing of 15 mm brass angle cock all complete as per building specification and instruction of E/I

Supply, fitting and fixing of Two Way CP Bib Cock 2 in 1 all complete as per building specification and instruction of E/I

Supply, fitting and fixing of Bathroom Hand Shower Leaded Brass (CP Health Faucet) all complete as per building specification and instruction of E/I

Supply, fitting and fixing of viterious chaina WC (europen pattern) all complete as per building specification and instruction of E/I

Supply, fitting and fixing of electric water heater (gyser) 25 litre capacity all complete as per building specification and instruction of E/I

Supply, fitting and fixing of viterious china wash basin all complete as per building specification and instruction of E/I

Supply, fitting and fixing of QUAA bathroom or toilet mirror (600mmx450mm) all complete as per building specification and instruction of E/I

Supply, fitting and fixing of Jaquar Towel Rail Cast Brass for Towel Rail all complete as per building specification and instruction of E/I

Supply, fitting and fixing of Oil filled radiator With fan heater all complete as per building specification and instruction of E/I

Providing and fixing 8mm thick Wooden Flooring including material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

Ms Gokul Construction