PROVISION OF ONE OFFICE BUILDING FOR SAMPLE ROOM AT AGE (I) CIF (K) IN SHALATENG GARRISON.

Amount

B/R items Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth and getting out, for foundation, or laying of cable in any type of soil, complete all as specified.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in soil, complete all as specified.

Earth filling under floor or paving, laid in layers not exceeding 25cm thick, spread, levelled and rammed including watering complete all as specified.

Removal of surplus soil to a distance exc 250 mtr and not exceeding 500 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point , complete all as specified.

Hardcore of broken stone or boulders of gauge n.exc. 63 mm deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

Cement concrete,1:4:8, type D-2 (using 40 mm graded crushed stone aggregate ) as in foundation, filling and mass concrete, complete all as specified.

Reinforced cement concrete, nominal mix, type A-1, 1:1.5:3 ( using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc ; basement slabs, under- reamed piles and mass concrete, all as specified and directed by Engr-in-Charge.

Reinforced cement concrete, nominal mix, type A-1, 1:1.5:3 ( using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, all as specified and directed by Engr-in-Charge.

Reinforced cement concrete, nominal mix, type A-1, 1:1.5:3 ( using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing compound as per latest IS specifications all as specified.

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete, all as specified and directed.

Damp proof course to horizontal or vertical surface including necessary form work 40mm thick in cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate), complete all as specified & directed.

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sqm, complete all as specified & directed.

Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm, complete all as specified & directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter, flat rough finished surface of concrete complete all as specified. .

Use and waste of form work to sides of soffits of floors or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc. rough finished concrete surface of concrete complete all as specified .

Use and waste of form work to sides of pillars, posts sturts, piers, columns and stanchions , rough finished surface of concrete complete all as specified .

TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

Rolled mild steel work in main and cross beams, hip and jack rafters; purlins where connected to comman rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe-410-0 or Fe-310-0, complete all as specified & directed.

Plates (plain or chequered ) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc. conforming to Fe-410- W(Gde- E-250) quality B, complete all as specified.

Rolled mild steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-0 or Fe-310-0, complete all as specified & directed.

Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5 mm dia, 40mm long complete all as specified and as directed.

1mm thick plain, black, mild steel sheeting, as in eaves boarding etc. complete fixed with welded or soldered jointed, complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges vally gutter ect. fixed with self tapping screws complete all as specified.

605 x 605 x 8mm thick Gypsum tiles, moisture resistant, micro look edge and fire inserted to GI/aluminium framework complete all as specified.

75 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and fair without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete, all as specified and directed.

75 mm thick plain cement concrete 1:4:8, type D-2 ( using 40mm graded crushed stone aggregate) as in sub base of floor, etc finished even and fair without using extra cement ,complete all as specified.

25 mm thick plain cement concrete 1:2:4 , type B-0 (using 12.5 mm graded crushe stone aggregate) as in floor to receive the tiles/floor finishes rough finished complete all as specified.

Screed bed or bedding layer of cement mortar 1:4, 15mm thick for laying floor finishes, complete all as specified.

Non-skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.18 sqm but not exc 0.38 sqm as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match shade of tilecomplete, all as specified. complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Glazed ceramic tiles, coloured, of size (300 x 450mm), thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat for dado/skirting etc complete all as specified and as directed.

15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer's instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid for separately under relevent item.

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

Preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of alkali-resistant priming paint, complete all as specified.

Preparation of new plastered or concrete surfaces of walls and applying two coats of cement base paint over a coat of suitable primer, complete all as specified.

5.0 mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

4.0 mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

Preparation of new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Anodised aluminium frames with powder coating ( thickness of powder coating not less than 50 microns) for partitions, doors, window, ventilators with one or more rebates including necessary joining cleats, glazing clips, rubber packing, beading, screws, complete with all fittings including fixing base of partition/frame with floor, grills complete all as specified.

Anodised aluminium powder coated ( thickness of powder coating not less than 50 microns) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Anodised aluminium powder coated ( thickness of powder coating not less than 50 microns) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21, 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified.

E/M items Point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts grade and including PVC conduit of suitable size ISI marked ( concealed wiring) (as per conducter run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet concealed in wall or on surface as per site requirement and making good disturbed surface of wall ,covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point/ fan point/exhaust fan/bell point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No 46 above, but for one 3 pin socket outlet 5 Amp on the independent board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No 46 above, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Sheet metal enclosure double door shutter type for DB’s SPN, 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete all as specified and as directed by the Engr-in-charge.

MCB SPN 32 Amps, 240 Volts, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

MCB single pole 6 to 32 Amps, 240 volts, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Switch piano flush button single pole one way 5 Amps, complete all as specified.

Socket outlet multipurpose 2 in 1, 3 pin, 5 Amp flush type, complete all as specified.

Switch piano flush button single pole one way 15 Amps complete, complete all as specified.

Socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, complete all as specified.

Ceiling rose surface type, 65 mm x 50 mm two to three terminals/PVC/polycarbonate, isolated body fixed on PVC block, complete all specified and as directed by the Engineer-in-Charge.

LED decorative ultra slim linear tube light 20 Watt including connecting using suitable wire complete all as specified and as directed by the Engineer-in-Charge Make: Cat Part No LHEXBHP7PN1W020 of Havells or equivalent of Bajaj/Crompton/ Philips/Syska

36 Watt LED Light fitting 2ft x 2ft recess mounting ceiling light fitting flush to ceiling Aura I pairs super bright LED's with highly efficient light-smoothing optics to deliver superior illumination and energy savings year after year with LED tube light and connecting using suitable wire complete all as specified and directed. Make : Crompton Cat Part No.LCPL-36-CDL(2X2) or equivalent in Wipro/Havells/Bajaj/ Philips/Syska.

Supply, jointing, fixing or passing through pipe, trenches or ducts, commissioning and testing XLPE insulated screened and PVC sheathed armoured electric power LT cable heavy duty with aluminium conductor nominal cross sectional area 16 Sqmm 2 core for working voltage upto including 1100 volts confirming to IS-7098 (Part-I) 1988, complete all as specified and as directed.

GI pipe 25mm bore light grade with all fittings laid in trenches/wall/poles for cable protection, complete all as specified and directed.

Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I laid before and after laying of cables,complete all as specified. Note :- Punned thickness shall be measured for payment purpose.

Sub class (B* brick, old size, brick covering laid dry, flat transversally along the length of cable on sand cushioning, with width equal to the length of the brick complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-charge.

M/S A.M.Enterprises