SPECIAL REPAIRS TO MEDOWS LINE BUILDING NO P 77 (08 QUARTERS) IN OTHER RANK MARRIED ACCOMMODATION OF 554 ARMY SERVICE CORPS BATTALION UNDER AGE B/R NO I AND AGE E/M (S) OF GE (S) SECUNDERABAD

Amount

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete un-reinforced paving not exc 15cm thick above or below ground level complete all as specified and as directed.

Demolition of reinforcement cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.16 Sqm but n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) complete all as specified and as directed.

Ditto all as per item No 05 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed.

M & L for PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and as directed.

M & L for granite 18-20mm thick (of any type) work table robed & polished cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1;4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, and half moulded at one side including demolition of old stone any type complete all as specified and as directed.

Rounding ( chamfering) to edge of marble/granite slab edge with mirror polishing such complete all as specified and as directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges kitchen platform etc of rough finished flat surfaces concrete complete all as specified and as directed

M&L for reinforcement cement concrete type B0 (1:2:4) using 12.5mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors roofs, landings, balconies canopies, deck slabs and in shelves, kitchen shelf etc complete all as specified and as directed.

S&F TMT bars 10 mm Dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm Dia or securing with clips quality conforming complete all as specified and as directed.

Demolition of filled materials (cinder concrete/lean concrete from Sunken floors and removing from site to a distance n.exc 500 Mtr complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including mixing of WPC finished even and smooth w/o using extra cement complete all as specified and as directed. NOTE: WPC will be measured and paid separately including taking down of old plaster.

M&L for Cleaning the surfaces thoroughly from dust, dirt & projections and applying a coat of hot blown bitumen bitumen 85/25 @ 1.2Kg/SQM over a coat bituminous primer @ 0.3 lit per sqm in sunken floor complete all as specified and as directed.

M & L for PCC (1:5:10) type E2 (using 40 mm graded crushed stone aggregate) as Sunken in filling and mass concrete complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 each complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening complete all as specified and as directed.

S & F for Factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed.

Supply and fix Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Supply and fix Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Material and Labour for PCC 1:2:4 Type B0 ( using 12.5 mm graded crushed stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

M & L for cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in lintel up to 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork. complete all as specified and as directed.

S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints. complete all as specified and as directed.

S&F 40mm thick second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkhats complete all as specified and as directed.

S & F powder coated anodised aluminium frame, three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F powder coated anodised aluminium sliding/openable window shutter and top hung ventilator shutters with sash bars aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrangement complete all as specified and directed. (note: Glass panes and wire mesh shall be measured and paid separately)

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165 complete all as specified and as directed.

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L in repairs for 18mm thick plywood of grade (BWR), type BB fixed with nails as in cupboards/Almirah Shutters complete all as specified and as directed.

M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish colour and pattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed.

M&L for 125mm long Aluminium handles, cast type, polished bright complete all as specified and as directed.

S & F in repair of 125 mm Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.

M & L for preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodized 150mm long. complete all as specified and as directed.

S&F Aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

S&F magnet catcher for cupboards or wardrobe etc complete all as specified and as directed.

S&F 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

Supply and fix in repairs figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane. complete all as specified and as directed.

S & F for 4.0 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for 300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

Supply only Aluminium alloy wire mesh 0.45 mm nominal Dia of wire average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan- necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F for 110mm Dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F for 110mm Dia PVC (SWR) bend any radius complete all as specified and as directed.

S&F for 110mm Dia PVC (SWR) bend with access door any radius complete all as specified and as directed.

S&F for 110mm Dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified and as directed.

S&F for 110mm Dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F for 75mm Dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F for 75 mm Dia PVC (SWR) bend of any radius complete all as specified and as directed.

S&F for 75 mm Dia PVC (SWR) bend with access door of any radius complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal, 75mm dia. complete all as specified and as directed.

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia. complete all as specified and as directed.

S&F PVC (SWR) vent cowl, 75mm dia. complete all as specified and as directed.

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and as directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and as directed.

S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm Dia complete all as specified and as directed.

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed.

S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed.

S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handle including brackets complete all as specified and as directed.

S&F in repair of Chromium plated tubular towel rail 20mm Dia 600mm long fixed with suitable steel screw etc complete all as specified and as directed.

S&Fin repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm Dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repair chromium plated gratings 100mm Dia with provision of with or without hole , fixed with suitable solvent cement etc complete all as specified and as directed.

S&F in repairs for plate rack of stainless steel of size 31X36X10 (inch) with steel sleeves & hanging arrangement for utensil, complete all as specified and directed

S&F in for Corner glass self assembly size 300mm with chromium plated bracket guard and railing complete all as specified and directed

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F for 110mm Dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches and in floor etc using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F in repairs PVC connection 15 mm Dia and 600 mm long with both end nuts complete all as specified and as directed.

S&F in repairs CP overhead shower Dia 130 mm round with revolving joints (with body rotation) & 225mm long arm shower with rabit cleaning system and all fittings complete all as specified and as directed. Make :Prayag or equivalent

S&F in repairs concealed stop cock but fancy type 15mm Dia, chromium plated with long shank and cup (concealed type). complete all as specified and as directed.

S&F in repair 20mm Dia CP Decorative type drapery curtain rods with brackets of approved quality complete all as specified and as directed .

Taking up or down 20mm Dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F for GI Tubing bore of dia 20mm Tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S& F for 20mm bore unplasticized PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

S& F for 25mm bore unplasticized PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.

S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs for providing 20mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes. complete all as specified and as directed.

S&F in repairs for providing 20mm dia CPVC gate valves screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs for providing 25mm dia CPVC gate valves screwed both ends for iron pipes complete all as specified and as directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed

S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded crushed stone aggregate) and setting in cement mortar (1:6) complete all as specified and as directed.

Providing precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded crushed stone aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4) in walls complete all as specified and as directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MoD land complete all as specified and as directed.

M&L for rendering in two layer i.e.5mm thick in CM 1:4 including mixing water proofing compound over 3% of the weight of cement used for top 5 mm thick on as per manufacturer's instruction 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on complete all as specified and as directed. (Note WPC shall be measured and paid separately)

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement)complete all as specified and as directed.

M&L for rendering 5 mm thick in ceilings in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed .

M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer and over a coat of 3mm average thick wall care putty including levelling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer's as that of paint complete all as specified and as directed.

M & L for preparing new plastered or unplastered surfaces of ceilings including cornices and applying three coat of white wash complete all as specified and as directed .

M&L for 10 mm thick Plaster on RCC roof slab and sunken portion with CM ( 1:3 ) including water proofing compound @ 3% by weight of cement used or as per manufacturer's instruction shall be carried out complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

M&L for PCC (1:2:4) type B-0, using 12.5 mm graded crushed stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by wt of cement or as per manufacturer's instruction complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyester reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown and one coat of bitumen based paint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treatment on roof with plaster, sunken slabs, edges and vertical surfaces complete all as specified and as directed.

M&L for applying a coat of reflective bituminous aluminium paint @ 0.15 Kg / sqm over Bitumen surface complete all as specified and as directed.

Supply only water proofing compound. complete all as specified and as directed.

M & L for preparing old surfaces plastered or unplastered ceilings including cornices and applying one coat of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and applying two coats of acrylic emulsion distemper over one coat primer and over a coat of 3mm average thick wall care putty including filling of cracks, holes and including levelling the surface which undulation found with wall care putty etc. complete all as specified and as directed.

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed.

M&L for PCC type D2 1:4:8 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B2 as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement. complete all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, treads, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding of edges complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in sub base complete all as specified & directed.

S&F for glossy finished heavy duty chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed.

M&L for 75mm thick plain cement concrete in (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down existing unserviceable Distribution boards / AC board with MCB's any size and any type complete all as specified and as directed

Material and labour for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets etc complete including making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed (a) onelight point/ ceiling /exhaust fan point/bell point

(b) One three pin switch socket 6 Amps outlet on independent board. complete all as specified and as directed.

(c) One three pin switch socket 6 Amps outlet on same board. complete all as specified and as directed.

(d) One light point controlled by two nos of two way switches.complete all as specified and as directed.

All as per item No 120 here in before but with cable 2.5 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed

All as per item No 120 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for socket out let 15 amps and AC box including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and as directed.

S & F in repair Modular switch 1 way 6A , 1-module complete all as specified and directed

S & F in repair Modular switch 1 way 16A with indicator, 1-module complete all as specified and directed

S & F in repair Modular bell push 1 way 6A with indicator, 1-module complete all as specified and directed

S & F in repair Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and directed

S & F in repair Modular socket, shuttered type, 6/16A - combined 2-module complete all as specified and directed

S & F in repair Modular switch 2 way 6A,1 module complete all as specified and directed

S & F in repair 3 pin, 6 A, 250 V ceiling rose having terminal capacity 3 X 1.5 mm² IP 20 protection complete all as specified and directed

S&F in repair Bells Ding dong AC 230Volts Single pole complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades,copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (≥) 6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour incl suitable fan hook with fixing arrengement for fan complete all as specified and directed. Make:Gold Medal cat part no.SCFS 500748/Bajaj Cat part No:ENERGOS 28/ Crompton Cat part No:ENERGION RIVIRA/Havells Cat part No:PRO 28BLDC/Luker Cat part No:ECO28NEOBLDC Regulator 222cmm

M&L for replacement of old unserviceacble light fitting with LED batten light fitting 20 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ Havells ENDURALINEARPROBS20WLED865PCSSIND/Bajaj-BCLAB20WCWLEDXT

All as per item no 18 but LED batten light fitting10 Watts 2 feet surface / wall mounted efficacy not less than 100 Lumen/Watt rated life 25000 burning hours complete all as specified and directed. Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / Bajaj-BCLAB10WLEDCWLED

S & F LED light fitting 10W bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size complete all as specified and as directed. Make: Crompton CIS-306-10-57-SL-DP-NBK/ PHILIPS WT202W LED10S CW PSU S3 PC/ HAVELLS HEXAFT10WLED857SSYMBOPC /WIPRO LW07-141-XXX-57-G1/Bajaj-BIBWP10W LED

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect as specified and directed by engineer-in-charge.complete in all respect as specified and directed. Make:Crompton TRP-409-45-57-SL-GL-NSG / PHILIPS BRP030LED35CWSLRGRPSUV1 / HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC /WIPRO LR22-501-XXX-57-XX/Bajaj-VISTAP45LWHPOPCSD

S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed.

S&F of sheet metal enclosure TPN DBs with 200 Amps rated bus bar of 4 way 415 volts with blank plate complete with double door complete all as specified and directed

S & F single pole & neutral, double door, metallic distribution board 8 ways conforming to IEC 61439-3, suitable for flush / surface mounting complete all as specified and directed

S&F of MCB single phase and neutral (SPN), 40 Amps, 230 Volts, connecting with lugs, complete all as specified and directed

S&F of MCB SP 6 to 32 Amps 'C' series complete all specified and directed

S&F of MCB, single pole, 40 Amps, 240 Volts, connecting with copper lugs complete all as specified and directed

S&F of MCB three phase and neutral (TPN), 100 Amps, 415 Volts, connecting with lugs, complete all as specified and directed

M & L for submain wiring concealed in wall using 3 runs of 6 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including taking down old submain wire and making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed

Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete incl taking down old one complete all as specified and as directed.

M&L for earth continuity conductor 4 Sq.mm dia GI or steel wire complete all as specified and directed.

harshraj and co (BID ID -3491521)

SAI RUPA CONSTRUCTIONS (BID ID -3491584)

VACON INFRASTRUCTURES (BID ID -3491682)

GUTHIKONDA BROTHERS (BID ID -3492135)