Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.7 L
EMD Value
₹3,500
Closing Date
29 Jan 2026, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SVP Commercial
Webel Bhavan Salt Lake Sec V EP GP Block KOL 91
Repair of non operational modules at TIE Building at Taratala
2026_WEBEL_992356_1
WEBEL/ EOT/W/25-26/000130 Dated 14/01/26
Open Tender
CIVIL WORKS
Item Rate
45 days
Taratala IT Park
Please refer to the tender documents
2 documents required · 2 mandatory
₹500
₹3,500
Yes
9 Jul 2026
21 Jan 2026
30 Jan 2026
21 Jan 2026
29 Jan 2026
22 Jan 2026
Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (in all floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In All Floors (Two Coats) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : In all floors (Two coats) Luxury Quality
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5 mm wide battens places bothways in order to make the door of solidcore and internal lipping with Garjanor similar wood veneers using phenol formaldehyde as glue etc.complete, including fitting, fixing shutters in position but including the cost of hinges and other fittings in all floor. 35 mm thick shutters (single leaf/double leaf)
Priming one coat on timber or plaste red surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On timber or plastered surface With super gloss(hi- gloss) Two coats (with any shade except white)
Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (in all floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In All Floors (Two Coats) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : In all floors (Two coats)Luxury Quality
Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (in all floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In All Floors (Two Coats) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : In all floors (Two coats) Luxury Quality
Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (in all floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In All Floors (Two Coats) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : In all floors (Two coats) Luxury Quality
Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (in all floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In All Floors (Two Coats) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : In all floors (Two coats) Luxury Quality
Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (in all floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In All Floors (Two Coats) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : In all floors (Two coats)Luxury Quality
Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (in all floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In All Floors (Two Coats) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : In all floors (Two coats) Luxury Quality
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.20 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.02 MB
BOQ_2426746.xls
BOQ • 0.36 MB
CorriTIE19.pdf
PDF • 0.19 MB
Corrigendum080626.pdf
PDF • 0.19 MB
Corrigendum210526.pdf
PDF • 0.19 MB
Corri130.pdf
PDF • 0.19 MB
Corrigendum23.pdf
PDF • 0.19 MB
CorriTIE.pdf
PDF • 0.19 MB
CorriNon.pdf
PDF • 0.19 MB
Corrigendum050326.pdf
PDF • 0.20 MB
Corri130.pdf
PDF • 0.19 MB
CorrigendumNonOperationalModulesTIE.pdf
PDF • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .