Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹25.8 L+₹1.4 L (5.69%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bid | |
| 3 | L3₹26.8 L+₹2.4 L (9.82%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest bid | |
| 4 | L4₹27.0 L+₹2.6 L (10.7%)Rejected-Finance NEAR TCP DOMAIL WARD NO 2 UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-Finance Being other than lowest bid | |
| 5 | L5₹27.0 L+₹2.6 L (10.7%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest bid |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
24 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
Garrison Engineer (North) Udhampur PIN-901220 C/o 56 APO
GE/U(N)-31/2024-25 REPAIR/ MAINT TO GATE, PAVED AREA AND MISC B/R ITEMS AT ASC SUP COY AND ADJOINING AREA UNDER AGE B/R-II OF GE (NORTH) UDHAMPUR
2024_MES_652468_1
GE/U(N)-31/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer the tender documents
7 documents required · 7 mandatory
₹500
GE NORTH UDHAMPUR
₹90,000
Yes
13 Sept 2024
6 May 2024
26 Jun 2024
6 May 2024
24 Jun 2024
20 May 2024
Amount
Demolition of brick work or stone boulder masonry built in cement mortar including all quoins arches pillars etc complete all as specified & directed by Engr-in-Charge.
Demolition of cement concrete unreinforecement of any description and in any position not otherwise specifically provided for complete all as per specified.
M&L for half brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius but in cm 1:4 complete all as per specified.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1:4 complete all as per specified.
All as per Ser item No 03 here-in-before but except bricks complete all as specified and as directed.
Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc. Complete all as per specified.
M&L for 15mm thick rendering on fair faces or brick / concrete surfaces in cement mortar 1:4 with using water proofing compound and finishes even and smooth without using extra cement complete all as per specified.
Supply only integral water proofing compound complete all as per specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) pipe 110mm dia single socket in any length with rubber ring joints fixed to wall / floor including PVC clamps complete all as per specified.
M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping. Kneelers, bed block including necessary from work complete all as per specified.
M & L two coat of cement base paint over newly plastered surfaces of wall including one coat of primer and preparing surfaces complete all as per specified and directed by engr-in-charge.
M&L Waling of random rubble masonry built in cement mortar 1:6, uncoursed, well bounded, bedded and solidly hearted complete, all as specified.
All as per above but except stones complete all as per specified.
M&L for Raised pointing to RR masonry in CM 1:4 all as specified and directed.
M&L for providing Precast cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone agg) as in PCC bonders set in CM 1:6 all as specified and directed.
M&L for PCC 1:2:4, B-1 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.
M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified.
Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as per specified.
M & L RCC M-25 type B1 1:2:4 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as per specified.
M/L RCC M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering with water proofing compound as directed laid/made to slope as in RCC roof surfaces complete all as specified & directed by Engr-in-Charge.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as per specified.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as per specified.
Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as per specified.
Mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as per specified.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as spd & dir by Engr-in-Charge.
Fixing only mild steel work as in posts & struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc & similar work confirming to Fe 290 Gde E-165 complete all as per specified.
S&F mild steel angle iron/flat iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed.
S&F in repairs Concertina coil punched type (including spike and handle) with 50/51 turns and dia 600mm, having a 2.6mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electro galvanized to provide protection against outdoor exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil steel clips connect the individual turns of the coil to each other so that it opens up like an accordion. The weight of each coil will be 9 Kgs (+- 5%) without packing material and coil length 7 to 8 mtr when opened up. Each coil wound with bituminized Hessian cloth for providing protective coating, complete all as specified and directed by Engineer-in-Charge.
Excavation in post holes (or similar holes) each not exceeding 0.5 cum, in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil complete all as per specified.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation for fencing post filling, and mass concrete, complete all as specified and directed.
Mild steel bolts, purpose made, with hexagonal or square head at one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30 cm long and dia of neck exceeding 12 but not exceeding 20mm complete all as per specified.
Supply and fixing in repair only for chain link MS galvanised fencing of 50 mm x 50mm size and type shall be directed by Engr-in-charge as per site requirement), complete all as specified and as directed. .
M&L two coat of synthetic enamel paint on steel surface over one coat of priming with red oxide, zinc chrome of any description over 10 cm in width or girth, not otherwise described including preparation of surfaces complete all as per specified.
M&L for PCC 1:4:8 type D-2 as in floors 75mm thick complete all as directed & specified.
M&L for Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over 50mm thick sand cushion all as specified.
M & L for providing Chequred cement concrete tiles 25cm x 25cm x 22 mm thick tiles set , jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over & incl 20 mm thick screed bed in CM 1:4 all as specified and directed by Engr-in-Charge.
M&L for Sand cushioning bed (filling under floors) incl spreading leveling watering if required complete all as specified and directed.
Dismantling wall and ceiling boards, fiber pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, structural steel frame , etc all as specified.
S/F in repair 4mm thick Non asbestos fiber cement building boards fixed or laid/inserted to timber /GI/ Aluminium grid/ framework with screws all as specified & directed by Engr-in-Charge.
S/F Anodised aluminium snap grid frame work for false ceiling all as specified & directed by Engr-in-Charge.
Dismantling asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridges, all as per specified and directed.
S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as per specified.
S&F in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as per specified.
M&L for Framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290-0 or Fe-310-0, incl portions framed and hung as gates, pintle hinges, stops, hand-made sliding bolts etc. Complete all as specified.
M/S GURU DEV BUILDERS
takashdeep traders
TULSI RAINA AND SONS
s l sharma and sons
M/S IMTESH BHAT
RAMAN CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .