Improvement and hot mixing of internal roads connecting to rural road 70115 for a length of 4.68km at Baag Shirfod in Curchorem Constituency of Quepem Taluka

Supplying of laterite stone soling of size 150-200 mm size and murrum having P. I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading watering and consolidation of binding material etc.(M easurements shall be considered on finished item) .

Providing and laying 50mm (con solidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in -Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu. m. bucket capacity to the specified levels grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513.

Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bi tuminous/granul ar surface cleaned with mechanical broom as per MoRT&H specifications clause 503.;Bitumen 80 /100@ 0.375 kg/sq.m

Providing and laying bituminous macadam with 40-60 TPH hot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder to the specified percentage of total mix transported to site with all leads laid over a previously prepared surface with sensor paver finisher to the required grade level and alignment and rolled with smoth wheeled roller and vibratory roller to achieve the desired compactionusing antistripping agent complete as per MoRT&H Specifications Clause 504; Grade-II (19mm nominal size)@3.3% of B itumen-mix;Anti stripping agent @ 0.5% of bitumen content

Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminious binder to mix with filler transporting the hotmix to work site with all leads laying with a h ydrostatic/hydr aulic paver finisher with sensor control to the required grade level and alignment using antistripping agent rolling with smooth wheeled vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509; Grade-II (13mm nominal size) @ 6.0% Bitumen of grade 60/70;Ant istripping agent @ 0.5% of bitumen content

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803