SITC of 250 KVA Distribution Transformer for Horticulture Building Under Upgradation of Research Laboratories in Horticulture (CAPEX) at Main Campus Shalimar, SKUAST-K.

Supply /Installation and testing of 250 KVA 11/0.440 KV 3 phase Al wound distribution transformer , with oil complete and confirming as per IEE rules and complete with test certificates including BI metallic clamps , lugs etc duly (Complete specifications are given at the end) BIS/IS approved/ Level 2 as per IS : 1180( Part -1) : 2014 Make Alba /AE/Simens/Kirloskar/ABB

Chemical earthing Copper 3 Mtr Long 65 mm 99% pure MM with pit and drilling etc , earthing compound included . Pit Cover . Complete job in all respects.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required

Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connections etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Above 95 sq. mm and upto 185 sq. mm

Supplying of GI channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) Collar/ Clamps,bolts and nuts including drilling holes x 6ftx4 No .

Dismantling and retrieving of existing cables from Horticulture block to existing DT etc and other cables . Complete job in all respects

Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr and depth 45 Cm (NS) made out of 2mm thick CRCA sheet with tappered roof having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 600 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd. Details as under Panel Powder Coated 2.0mm S/I of MCCB 400 A 4P 70 kA = 1 No. , Bus Bar 1000A Panel Accessories like nut bolts, locks, etc , Cement concrete works as needed.

400 A,50KA,FPMCCB Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required

Transformer belt fabricated 50x50 x10 ft long as needed at site

Note:- The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects.

Please Enable Macros to View BoQ information