Loading
Loading…
Loading…
Tender Value
₹37.4 L
EMD Value
₹74,800
Closing Date
5 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SIG/NORTH
14 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of a partnership concern, he should submit the certified copy of partnership deed (PD) along with the tender and authorization to sign the tender documents on behalf of partnership firm. If these documents are not enclosed along with the tender documents, the tender will be treated as having been submitted by individual signing the tender documents. The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partners should submit along with the tender or at a later stage, a power of attorney(POA) duly stamped and authenticated by a Notary public or by Magistrate in favour of the specific person whether he or they be partners of the firm or any other person specifically authorizing him or them to submit the tender, sign the agreement ,receive money, witness measurement, sign Measurement Books, compromise, settle, relinquish any claims preferred by the firm and signed No claim certificate and refer all or any dispute to arbitration.
Tenderer should clearly state the status of firm and submit the relevant document in support of authentication, in absence of following/relevant documents the offer of tenderer is summarily rejected: (A)Self-declaration /proprietorship certificate in case of proprietor firm along with POA if any. (B) Partnership deed and power of attorney in case of partnership firm. (C)Certified copy of an extract of resolution passed by the board of directors in case of limited firm or Private Limited Company
(a) Sole Proprietorship Firm: (i)All documents in terms of Para 10 of the Tender Form (Second Sheet)of Tender document
(b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and 1.1.2 he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of Para10 of the Tender Form (Second Sheet)of Tender document
(c) Partnership Firm: (i)All documents as mentioned in para18 of the Tender Form document
(d) Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney 1.1.4 issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of Tender document
(e) LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from 1.1.5 participation intenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/ LLP or JV in which they were/ are partners/members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.(v)All other documents in terms of Para 10 of the Tender Form(Second Sheet).
(f) Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of 1.1.6 the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of tender document
Information as per Para 16 of GCC Part (1)(Tender form second sheet Annex-I) related to Employment/Partnership Etc. of Retired Railway Employees and Clauses 59 (9) & 62 (1) (xv) to GCC regarding employment etc. Of retired government officers by railway contractors
Certificate of Information regarding EMPLOYMENT/PARTNERSHIP etc. of Retired Railway Employees with the tender as per the attached proforma, Format 11 of tender document
Certificate of NO RELATIVE being an employee of Western Railway as per attached Performa Format10 of Tender document
Supply, installation,and testing of signaling outdoor work in connection with the construction of the new TRIP shed at Surat Station of the Virar-Surat section of the Mumbai Division.
SG_216_2_154_WA
SG_216_2_154_WA
Open
Works - General
6 Months
Mumbai, Maharashtra
₹0
₹74,800
5 May 2026
13 Apr 2026
21 Apr 2026
77 items across 2 schedules · ₹27,54,015.92 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Miniature, Plug-in Type, DC Neutral Line AC Immunized Relay, Style QNA1, 24 V DC, 8F- 8B/12F-4BContact, Code ABDGH/ABDFH Spec: BRS: 931A; IRS S 34; IRS S 23; IRS S 60-78. | Numbers | 110.00 | 5,576.04 | 6,13,364.4 |
| 2 | Plug in Type,Tractive Armature, ACImmunized, DC Biased Contactor Relay, Style QBCA1,2HF- 4B Contact,24 V DC, Code BCEJK Spec:BRS:943 ; IRS S 34 ; IRS S 23 ;IRSS 60-78. | Numbers | 10.00 | 7,393.68 | 73,936.8 |
| 3 | Miniature, Plug-in Type, DC Neutral Line Magnetically Latched Relay, Style QL1, 24 V DC, 11F-4B Contact, Code ABDEG Spec: BRS:935A ; IRSS 34 ; IRS S 23. | Numbers | 10.00 | 7,390.44 | 73,904.4 |
| 4 | Portable workstation for Data input & configuration with necessary software/ programs / AccesSOR-24ies, simulation and functional testing, diagnostics, and troubleshooting and commissioning of EI system. A suitable table and chair of a reputed make shall be supplied by the contractor. Note: The specification of the portable workstation shall be as per the Technical specification given in Annexure or higher version as approved by Engineer In-Charge. All the required software should be uploaded Licensed CD should be given along with the software. (Name of the reputed firm and technical specification shall be written in tender documents.) | Set | 1.00 | 1,47,350.87 | 1,47,350.87 |
| 5 | Instruments and Tool Kits required for Trouble Shooting and repair of hardware and software for the EI system should be supplied for stations as per schedule item 1 above. This includes tools required for EI maintenance SOR-24ts of crimping, insertion, removal. General purpose tools like screwdrivers, spanners, PCB extractor, temp. Controlled soldering iron, wire cutter, nose pliers, etc. Measuring instruments with carrying case/ holders/ cabinet for technicians/ J.E. for testing, Maintenance and repair at the site). Each set comprises the following: - 1. Crimping tool for all types of special cable assembly used in EI system. 2. Insertion tool for all types of special cable assembly used in EI system. 3 .Removal tool for all types of special cable assembly used in EI system. 4. Digital multimeter (Fluke 111 or better) 5. Steel cabinet/ Almira, Size: 1980mm height, 915 mm width and 485 mm depth (Godrej Make/Jalaram) of good quality to store tools, spare cards and documents. 6. Clamp Earth Tester. 7. Clamp Current Meter. | Set | 1.00 | 1,30,201.33 | 1,30,201.33 |
| 6 | Relay, AC Immune, Plug-in-type, style "QNA1K" ACI DC Neutral line, 24V DC 1000 Ohms 6F.6B contacts, front contacts metal to carbon and back contacts metal to carbon. Complete with plug board, retaining clip and connectors confirming to IRS: S34, IRS: S23, BRS931A. As per RDSO Specification No. STS/E/Relays/UEA (PI) Dt.30/05/97. Annexure II. The interlocking pin code CDEKY. (for cutting in provision) | Numbers | 2.00 | 5,525.31 | 11,050.62 |
| 7 | Key Lock Relay working on 24V DC, AC immunize with different ward combinations (Three ward plates to be supplied with each relay). Key ward shall be specified by engineer incharge as per requirement. | Numbers | 1.00 | 9,743.97 | 9,743.97 |
| 8 | Miniature, Plug in Type, M to C,DC Neutral ,Track relay, ACI, Style QTA2, 9 Ohm, 2F-1B contact,Code - FGHKX Spec : BRS :939-A & 966 (Appx-F2) & IRS : S-23, S-23,S-34 & 60. | Set | 2.00 | 4,878.9 | 9,757.8 |
| 9 | Miniature,Plug in type, M to C,AC immunized, DC biased Track Relay, 2F-2B contacts, style QBAT- 9 ohms. Code ABEJX Spec:- RDSO/SPN/84 Ver. 2 : IRS -S@ 45"44@IRS-S-23, IRS-S@ 45<45@ 78. | Numbers | 2.00 | 5,393.68 | 10,787.36 |
| 10 | PVC insulated Railway Signaling multi-core Indoor Cable 1 mm x 40 mm x 0.6mm Dia conforming toIRS:76/89(Amd3) or latest. | Kilometre | 1.00 | 92,180.73 | 92,180.73 |
| 11 | Single core multi-strand wire 0.5 sq.mm. (16 conductor each dia. 0.2mm), as per IRS 76/89 (Amd3) or latest. | Kilometre | 2.00 | 5,548.54 | 11,097.08 |
| 12 | Disconnect Terminal Block, Screw less type, 4- wire front entry (Two in-put & Two out-put) The color will be decided by Engineer - in - Charge. (Preferably In Blue, Red & Grey Colors in the ratio of 1:2:3). as per RDSO Spec. No. RDSO/SPN/189/2004. With latest amendments. Note: Make to be approved by Railway before supply. | Numbers | 100.00 | 58.53 | 5,853 |
| 13 | Supply of End plate 2.5mm/0.091 in thick as per site requirement. | Numbers | 10.00 | 11.07 | 110.7 |
| 14 | Supply of End Stopper 10mm/0.0394 in width as per site requirement. | Numbers | 20.00 | 10.86 | 217.2 |
| 15 | Supply of Carrier Rails for above 35mm x 7.5mm, 1mm/0.039 in thickness un-slotted type as per site requirement. | Metre | 2.00 | 113.88 | 227.76 |
| 16 | Supply of Digital Earth Resistance tester three terminal type with LED display, 1999 count, KOICO model 5600 or any reputed make approved by engineer in-charge. | Numbers | 1.00 | 13,356.84 | 13,356.84 |
| 17 | Supply of Digital Insulation Tester 100V/250V/500V range of Model Rishinsu 20 Make :RISHABH or MECO or similar. | Numbers | 1.00 | 8,240.4 | 8,240.4 |
| 18 | Digital low current clamp meter to measure current leaks (parasitic draw down to 1 mA) and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make -Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accesSOR-24ies like test lead, batteries and carrying case, sample may be got approved from consignee before supply. | Numbers | 1.00 | 18,194.34 | 18,194.34 |
| 19 | Digital Multimeter of Fluke 287 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 seconds or Superior. | Numbers | 1.00 | 78,421 | 78,421 |
| 20 | Professional AC/DC clamp meter 3 ¾ digit, true RMS measurement, For Measurement of DC/AC currents up to 1000A, Voltage up to 600V, resistance up to 40 M, and frequency up to 1 MHz with a set of leads & carrying case. Model - DCM39A or equivalent/ higher make Motwane/Stanley/Fluke/Megger. | Numbers | 1.00 | 12,853.59 | 12,853.59 |
| 21 | Supply of Standard Tools set. | Set | 1.00 | 35,317.28 | 35,317.28 |
| 22 | Position Light Shunt Signal Unit Complete with Post (made of GI Pipe of 80 mm Diameter Medium Class IS Spec. No. IS: 1239 Pt. 1/1990) Base, Hood, and Cover, etc. as per Drg. No. SA- 23840, Signal Number Plate, suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item). | Numbers | 1.00 | 4,530.07 | 4,530.07 |
| 23 | SS Location box made of Spl Grade SS 304 of sizeas perdrg.No.DRM/SG/948 (Single app. Case).The manufacturer'scertificatein regard to grade of stainless steel and testreportbe submitted atthe time ofsupply. Note:- (1)Enclosureshould bemade of 1.6 mm &doormade of 2 mm thick SS304sheet. (2)SS 20 mm(rod) X 100mm (height)male female hingesformoving door smoothly.(3)SS16 mm Rod fixhandle for boththe door.(4)SS sheet stiffner(0.8to 1 mm thickness)tostrengthen the door bothside.(5) SS hook (6 mmrod) to beprovided onboth doors forkeepingthe door openposition.Stoppers to beprovidedfor both doors. (6)E-typelocking arrangement(W11)for both door andlifting hook(5X150 mm)02 Nos (7) SSsheet 450mm x 650 mm forfulllocation box provision ofanywriting work at frontside dooretc. (8)Provision of switchboardfor location light fittedwithone two pin holder,One threepin socket(female) and twopianotype switches of 6Aforlocation boxes withinternalwiring 2.5 sq.mm flexiblecopper wires,Holders ,socketandswitch should be ofISImark. (9)IndianRailwayproperty tag is to beprovided on two sidewithfollowing details, Sr.No,Manufacturing firm name&year of Manufacturing.(10)White enamel paintshall beprovided insidelocation box.(11)SSangle frame 30 mm x30mm x 5 mm is providedalongwith location box.(12)Earth GIclamp 5 mmx 50 mm flat isprovidingto location at two endstoconnection earth GI patti. (13)All hardware usedinlocation box formountingarrangements shall beofSS (nuts, bolts, washersetc).(14)Suitable locationbox Hylamfabrication toprovide the clearspace of writing to 18 cm to 20cm(15) Packing each location box to be shipped using wrapping plastic sheet around location box. | Numbers | 1.00 | 59,855.98 | 59,855.98 |
| 24 | SS Location box is made of Spl Grade SS 304 of sizeas per drg.No.DRM/SG/945 (Half app.Case).Manufacturer'scertificate inregard tograde of stainlesssteeland test report shallbesubmitted at the timeofsupply. Note:- (1)Enclosedshould be made of1.6mm & door made of 2mmthick SS 304 sheet.(2)SS 20mm (rod) X 100mm (height)male femalehinges for movingdoorsmoothly. (3)SS 16mmRod fix handle for boththedoor. (4)SS sheetstiffner (0.8 to1 mmthickness) forstrengthenthe door both side.(5) SShook (6 mm rod) tobeprovided on both doorsforkeeping the door openposition.Stoppers to beprovided for bothdoors.(6)E-typelockingarrangement (W11)forboth door and liftinghook(5X150 mm) 02 Nos (7)SSsheet 250 mm x 450mm forhalf location boxprovision ofany writingwork at front sidedooretc. (8) Provision ofswitchboard for locationlight fittedwith one twopin holder, Onethree pinsocket (female) andtwopiano type switches of 6Aforlocation boxes withinternalwiring 2.5 sq.mm flexiblecopper wires,Holders ,socketandswitch should be ofISImark. (9)IndianRailwayproperty tag isprovidedon two side withfollowingdetails, Sr. No,Manufacturing firm name& yearof Manufacturing.(10)White enamel paintshall be providedinsidelocation box. (11)SSangleframe 30 mm x 30mm x 5 mmis providedalong with locationbox.(12)Earth GI clamp 5 mmx50 mm flat is providingtolocation at two endstoconnection earth GI patti.(13)All hardware usedinlocation box formountingarrangements shall beofSS (nuts, bolts, washersetc).(14)Suitable locationbox Hylamfabrication toprovide the clearspace ofwriting to 18 cm to20cm. (15) Packingeachlocation box to be shippedusing wrappingplastic sheet around location box. | Numbers | 2.00 | 51,998.06 | 1,03,996.12 |
| 25 | IS 13410: Glass Reinforced Polyester Sheet Moulding Compounds (SMC) Size of Sheet : 1000x1000x8. | Numbers | 3.00 | 5,388.67 | 16,166.01 |
| 26 | Phenolic laminated Sheet,grade P3 in standard size of1220 X 1220 x 10 mm as perspec. No IS 2036 of 1995 orlatest. Test report ofmanufacture to be supplied. | Numbers | 3.00 | 4,442.93 | 13,328.79 |
| 27 | ARA Terminal blocks with links made of PBT Spec No.s/75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4. | Numbers | 300.00 | 75 | 22,500 |
| 28 | Half Round RCC pipes & collars of 150 mm internal dia (1 meter long) along with collars as per IS No. 458/2003 of NP type. Tenderer shall submit inspection/test report before supply for priorapproval by Engineer in charge. | Numbers | 1000.00 | 159 | 1,59,000 |
| 29 | Maintenance Free Earth Electrode of length 3m,including supply of 3 bags of Earth enhancement material for earthling(10KGs/bag) foreach electrode &other accessories as per Drg.No. SDO / RDSO/E&B/001 andRDSO Spec No. RDSO/SPN/197/2008. This itemincludes thefollowing items: (a)Copper bonded steelearthelectrode of 3.0 meter long &17.2mm dia with Cu-bondingthickness of min250 micron - 1no. (b) Earth-enhancingcompound (10Kg/Bag) - 3 No. (c) Cu-strip200 X 25 X 6 mm to terminateearthrod = 1no. (d) Cu-strip300 X 25 X 6 mm(MEEB) = 1no. (e) Cu-strip 150 X 25 X6mm (SEEB) = 1 no.(Inspection by RDSO) | Numbers | 3.00 | 10,403.08 | 31,209.24 |
| 30 | Supply of Fiber/SMC/FRP/RCCEarthChamber asperinstructions ofEngineerIncharge as per siterequirementasperSTS/E/TAN/3006 ver 3.0. | Numbers | 3.00 | 649 | 1,947 |
| 31 | Point insulation Complete set as per RDSO Specification IRS: S-40/84 for Switch bracket, Split-Stretcher bar & Gauge tie plates (52 Kg/60Kg as per site requirement). | Set | 1.00 | 1,345.93 | 1,345.93 |
| 32 | Ground connections, complete set suitable for IRS type / approved point Machine for ordinary turnout with tongue attachment insulation and other insulation as per RDSO Drg. S/3361@47>47@63 (for IRS type point machine) or RDSO Drg No.SA-9151/52 (for Siemens point machine) with latest amendments. However the ground connection shall be procured only after confirmation from Railway engineer as per site condition /type of machine/turnout. | Set | 1.00 | 8,881.48 | 8,881.48 |
| 33 | Track feed battery chargers, 110V AC input, 2 to 6/10 V DC Output; as per Specn.No.IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery. | Numbers | 2.00 | 3,523.27 | 7,046.54 |
| 34 | Choke Coil for Single Rail Track Circuit on 25 KV 50 Hz AC Electrified Section as per Spec No IRS S 65/1983 with latest amendments. | Numbers | 2.00 | 2,129.53 | 4,259.06 |
| 35 | Low maintenance lead acid secondary cells for railways S & T installations in Polypropylene copolymer (PPCP) hermatically heat sealed containers as per RDSO specification IRS S- 88/2014 capacity 2V/80AH | Numbers | 6.00 | 2,213.81 | 13,282.86 |
| 36 | Adjustable Track Feed Resistance disc type 30 ohms as per RDSO Drg. No. SA 20166/M (Adv.) with latest amendments (with Phenolic molded base). | Numbers | 2.00 | 978.46 | 1,956.92 |
| 37 | Track Lead Junction Boxes as per C.Rly Drg. No.RST 11509 made from fiber glass/SMC/FRP along with terminal blocks. | Numbers | 15.00 | 1,120.65 | 16,809.75 |
| 38 | GI wire 8 SWG (4mm Dia) suitable for track circuit rail bonding. | Kg | 50.00 | 68.17 | 3,408.5 |
| 39 | Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm Dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. | Numbers | 50.00 | 6.04 | 302 |
| 40 | PVC jacketed wire rope for Track Lead connections. PVC jacketed wire rope should be of Galvanized steel wire rope 6 mm Dia (6x19 stranded wire with a steel core of 6 mm Dia) sheathed with PVC 2mm wall thickness, the overall thickness is 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970. Reclaimed or recycled material should not be used. | Kilometre | 1.00 | 5,553.17 | 5,553.17 |
| 41 | Hydrometer, Exide make or similar for measuring the specific gravity of Battery Graded acid with mounting stand in location Boxes. | Numbers | 1.00 | 282.46 | 282.46 |
| 42 | Drill bits 7.2 mm or as per instructions of Engineer In-Charge. | Numbers | 10.00 | 140.76 | 1,407.6 |
| 43 | Channel Pins MS(Galvanized) single roove, 7 mm suitable for 4mm dia bonding wire a s per spec No IRS S 17 & RDSO Drg No. S-69/M. | Numbers | 100.00 | 6 | 600 |
| 44 | Fuse block 2 Amp or as per instructions of Engineer In-Charge. | Numbers | 10.00 | 132.3 | 1,323 |
| 45 | Non-detrioting type fuse 2 Amp or as per instructions of Engineer In-Charge. | Numbers | 10.00 | 62.77 | 627.7 |
| 46 | Supply of PPTC fuses 2A for TF TR or as per instructions of Engineer In-Charge. | Numbers | 10.00 | 20.34 | 203.4 |
| 47 | Diagnostic Terminal :Multisection Portable operator console for on site programming of AxleCounters as per technical requirement. | Numbers | 1.00 | 91,401.03 | 91,401.03 |
| Schedule total | ₹19,27,392.08 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD-154STTripShed.pdf
ATTACHMENT
TD-154STTripShed.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .