REPAIR/REPLACEMENT OF VARIOUS ROAD FURNITURES, ROAD MARKING PAINT, CURVE STONE, FOOTH PATH TILES INCLUDING PAINTING OF TILES ETC. IN AOR OF AGE B/R - II AT NARANGI UNDER GE NARANGI

S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection ncluding embedding in PCC 1:2:4 (150x150x300mm) type B1 (using 20 mm graded stone aggregate) incl Form work, excavation, returning filling and removal of soil etc complete all as specified and directed.

S&F in repairs 100% water proof solar road delineator pole mounted (Pole size 48mmX1000mm duly powder coated), Battery capacity 2X1.20 Volts, 1600 mAH high temperature Battery, 36 hrs after full charging, 04 Nos of LED including embedding in PCC 1:2:4 (150x150x300mm) type B1 (using 20 mm graded stone aggregate) incl Form work, excavation, returning filling and removal of soil etc complete all as specified and directed.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

All as per item No 3.00 here-in-before, but taking down carefully from road surface incl cleaning, stacking and re-fixing with suitable adhesive in the same location or any other area of road surface after road marking paint etc complete all as specified and directed.

S&F in repair solar cat eye aluminum alloy shall be (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

All as per item No 5.00 here-in-before, but taking down carefully from road surface incl cleaning, stacking and re-fixing with suitable adhesive in the same location or any other area of road surface after road marking paint etc complete all as specified and directed

S&F in repairs retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter (any Nos, Patterm, Shape, letter pacing as directed), message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of Stainless steel angle size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. Stainless steel angles of size 35x35x5 mm to a vertical post made up to Stainles steel Tee section 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing Stainless steel message plate of required size, including embedding in PCC 1:2:4 (300x300x450mm) type B1 (using 20 mm graded stone aggregate) incl Form work, excn, RFR and removal of soil etc complete all as specified and as directed (Notes-Stainless steel grade 304 to be used in the work)

S&F in repairs retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter (any Nos, Patterm, Shpae, letter pacing as directed), message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support Stainless steel angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. Stainless steel angles of size 35x35x5 mm to a vertical post made up to stainles steel Tee section 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing Stainless steel message plate of required size ncluding embedding in PCC 1:2:4 (300x300x450mm) type B1 with (using 20 mm graded stone aggregate) incl Form work, excn, RFR and removal of soil etc complete all as specified and directed (Notes-Stainless steel grade 304 to be used in the work)

S&F in repairs Retro reflective regulatory sign board of size 900 mm diameter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC-67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to Stainles steel frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of Stainless steeel angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement including embedding in PCC 1:2:4 (300x300x450mm) type B1 (using 20 mm graded stone aggregate) incl Form work, excn, RFR and removal of soil etc complete all as specified and directed (Notes-Stainless steel grade 304 to be used in the work)

S&F in repairs replacement Double Legged informatory Sign Board of Size 1.0Mx1.5M (Appx 1.5 Sqm ) fixed on single frame,both side and meeting back to back on the stainless steel 50x50x3.65mm size, the boards are of high intensity grade retro-reflactive sheeting of AVERY DENNISON made out of 2mm thick alcoban sheet/aluminium composite pannel sheet confirming IS 736 colour as approved by Engineer-in-charge on stainless steel square pipe of size 50x50x3.65mm square pipe with nuts, washeresand bolts. The lettering will be computarised cut of high intensity grade white sheeting (AVERY DENNISON) and mechanicallly fixed on both side board over vertical post of 50mm stainless steel square pipe 3.65 thick 3.20mm thick, 3.20 M long having 2 Nos flat iron 40x5mm strips, 0.30M long on bottom and fixedwith and including embedding in PCC 1:2:4 (300x300x450mm) type B1 (using 20 mm graded stone aggregate) incl Form work, excn, RFR and removal of soil etc complete all as specified and directed (Notes-Stainless steel grade 304 to be used in the work)

S&F in repairs replacement Double Legged informatory Sign Board of Size 0.6Mx0.9M (less 1.5 Sqm) fixed on single frame,both side and meeting back to back on the stainless steel 50x50x3.65mm size , the boards are of high intensity grade retro-reflactive sheeting of AVERY DENNISON made out of 2mm thick alcoban sheet/aluminium composite pannel sheet confirming IS 736 colour as approved by Engineer-in-charge on stainless steel square pipe of size 50x50x3.65mm square pipe with nuts, washeresand bolts. The lettering will be computarised cut of high intensity grade white sheeting (AVERY DENNISON) and mechanicallly fixed on both side board over vertical post of 50mm stainless steel square pipe 3.65 thick 3.20mm thick, 3.20 M long having 2 Nos flat iron 40x5mm strips, 0.30M long on bottom and fixedwith and including embedding in PCC 1:2:4 (300x300x450mm) type B1 (using 20 mm graded stone aggregate) incl Form work, excn, RFR and removal of soil etc complete all as specified and directed. (Notes-Stainless steel grade 304 to be used in the work)

S&F in repair Road safety convex Mirror 80 cm dia Polycarbonate unbreakable round wide-angle driveway mirror with adjustable brackets & nuts, bolts for installation with 50 mm dia GI pipe including embedding in PCC 1:2:4 (300x300x300mm) type B1 (using 20 mm graded stone aggregate) incl Form work, excn, RFR and removal of soil etc complete all as specified and directed.

S&F in repairs yellow & black plastic speed bump is made of ABS material. Two highly reflective reflectors molded in PMMA material are welded with ABS plate through ultrasonic welding process. Size of the speed bump: Length-750mm, working width-250mm, Height-75mm & incl fixiing arrangment and back side concrete filling etc complete all as specified and as directed

S&F in repairs speed indicator device 3 digits product name SID-004-03 materials PCSHEEL+Galvanized iron display model 3 Digit, display frame size 860X580X240mm, operating temp F(C) -20 to 80, Speed unit - Km/H working voltage DC12V/SOLAR standby power consumption -70 MA, working current -400 MA, waterproof level -IP65, visible distance around 500 mtr fixed with MS frame as directed including embedding in PCC 1:2:4 (300x300x300mm) type B1 using (20 mm graded stone aggregates) incl Form work, execavation, Retruning filling and removal of soil complete all as specified and directed.

M&L for preparation of new or previously treated surfaces to receive thermostatic paint and applying road marking with hot applied thermoplastic compound with reflectorizing glass beads on bituminious surface 2.50mm thick including reflectorizing glass beads @ 250gms/ sqm area as per IRC: 35- 1997 and finished the surface in proper level, uniform, free from steaks and holes complete all as specified and directed. Notes : Work reqd to be carried out with special applicator machine (Automatic thermoplastic Road marking Machine) and nothing extra admissible on this account.

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and directed.

Demolition of Stone slab and tiles incl backing coat of any description or thickness in floors, aprons etc (Laid dry or laid dry and pointed) etc complete all as specified and directed

M&L for Plain cement concrete Type D-2, 1:4:8 using (40 mm grades stone aggregates) as in foundations and mass concrete etc complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of any size, top bullnosed shape, made of M-25 (Design Mix) grade cement concrete, in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M & L for cement concrete M7.5 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate 100 mm thick in sub base for laying tiles, pavings, floorings etc. all as specified and as directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and directed

M&L for machine presssd Pre-Cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and directed

M&L for machine presssd Pre-Cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 80 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and directed

S&F of exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles etc complete all as specified and directed.

M&L for Heavy duty parking tiles (Coloured) 8 to 9 mm thick area of each tiles exceeding 0.09 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed

M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed.

Demolition and breaking up drain pipes up to 110 mm dia bore (PVC Pipes) set in cement mortar etc complete all as specified and directed

M&L for 110 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed

Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed.

M&L for Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and directed

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint etc complete all as specified and directed

M&L for preparation of new concrete surfaces (Kerb Stone) and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and directed

M&L for preparation of Old concrete surfaces (Kerb Stone) and applying one coat of synthetic enamel paint etc complete all as specified and directed

Please Enable Macros to View BoQ information