CONSTRUCTION OF PORTICO GODOWN AND PROVIDING CUBICAL IN THE ADMINISTRATIVE OFFICE BUILDING AT DHARMAPURI DCMPU LIMITED

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any - of existing RCC etc., keeping the debris away from the site places as shown by the federation officers cost including all tools and plants etc., complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of wall - Existing PCC etc.,keeping the debris away from the site places as shown by the federation officers cost including all tools and plants etc., complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of wall Dismantling of brickwork , keeping the debris away from the site places as shown by the federation officers cost including all tools and plants etc.,complete complying with standard specification.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation and basement and trenches with M. FILLING SAND in layers of not more than 15cm thick, well watered, rammed and consolidated complying with standard specification etc., complete as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling Gravel in layers of not more than 10 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

REINFORCED CEMENT CONCRETE 1:11/2:3 (One cement One and half sand and four aggregate) using machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams etc., complete complying with standard specification and as directed by the departmental officers- upto basement

Above basement Upto 4.5 m Height

Supplying fabricating and placing in position of reinforcement grill for all RCC works including cost of steel rod and binding wire, labour for bending, cutting and tying etc., complete as directed by dept. officers in all floors.

Supplying erecting steel centering using M.S. Sheet of size 90 X 60 cm BG 10 gauge stiffered welded with MS angle of size 15 X 25 X 3mm laid over silver oak country wood joints of size 10 X 6.5cm spaced about 90cm C/C and supported by casurina props of 10 to 13cm dia spaced at 75cm Tk for all type of RCC roof slab, lintel, beam ‘T’ (or) ‘L’ beam landing slab, plinth beam grade beam, column footing sunshade etc (The retrived materials should be taken back by the contractor) and std. specification- Column Surface Upto Basement

Plain surface upto Basement

Column surface - from basement to 3.30 m

Plain Surface - From basement to 3.30 m

Brick work in cement mortar 1:5 using II class chamber burnt brick of size 9” X 43/8 ” X 23/4” to line level and to plumb on one face including necessary scaffolding, racking out joints curing etc., as directed by dept. officers and as per standard specifications.- 230 mm thk- Upto Basement

From basement to 4.50 m ht

From 4.50 m ht to 9.00 m ht

BRICK WORK in cement mortar 1: 3 (One cement and three sand) using second class chamber burnt bricks of size 9" x 43/8" x 23/4" for the Partition walls including hoop iron reinforcement curing etc., complete complying with standard specifications. - 0.115m

Plastering with Cement Mortar 1:5 (One cement and M.sand), 20 mm thick in all floors including curing , scaffolding whereever necessary etc. complete complying with standard specification and as directed by the Engineer-incharge.

Plastering with Cement Mortar 1:5 (One cement and M.sand), 12mm thick in all floors including curing ,scaffolding whereever necessary etc. complete complying with standard specification and as directed by the Engineer-incharge.

Plastering with Cement Mortar 1:3 (One cement and M.sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the Engineer-incharge.

PAINTING the wall surfaces with TWO COAT of Weather shield max exterior paint of the approved colour as per the Specification including ONE COAT OF PRIMER to give an even shade at the external walls with necessary scrapping including cost of brushes and all other materials required and the scaffolding charges. (The paint to be used should be got approved by the federation officer before us on work)

Painting the wall surface using best quality of PLASTIC Emulsion paint TWO COAT with ONE COAT OF PRIMER as per the Specification of the approved colour to give an even shade, including cost of brushes and all other materials required and the scaffolding charges. ( The paint to be used should be got approved by the federation officer before us on work.)

FLOORING with scratch proof Plain CERAMIC TILES of premium quality and size 305x305x6mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments at 3.00 kg/m2 etc., omplete complying with standard specification.

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two M sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand or M Sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three M Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Finishing the top of roof slab with one coarse of decorative tiles of approved quality laid in cement mortar 1:3, 20mm thick mixed with 2% of water proofing compound of approved quality by weight of cement etc,. complete as instructed by the federation officers and as per the standard specifications.

Providing & fixing open UPVC SCH-80 class water pipeline of ISI mark and approved make of following diameters at all levels, including all necessary heavy duty specials and fittings of ISI mark and of approved make, fixing witharrangement viz. standard pattern holders bat clamps made out of Galvanised Steel (GI) flat carrier fixed with GI bolts in the RCC or brick masonry and GI "C" clamp fixed to secure the pipe with GI bolts / screws / washers of required shape and size so as to fit tightly on the pipes when tightened with screwed, making holes, cutting floors, making good the walls and floors etc. complete as directed - for providing and laying 65mm dia uPVC Pipeline.(Below Ground Level)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Federation Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Federation Engineer before use on works).

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Federation Engineer before use on works).

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Federation Engineer before use on the works)

Supplying and fixing position CI Nahini Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Federation Engineer before use on works)

Supplying and fixing in position best quality PVC soil / waste pipes of various 160 mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Federation Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.(As per SOR Specifications)

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.(As per SOR specifications)

Supplying, fabricating and placing in position of Aluminium LOUVERED VENTILATOR natural colour mat finish with the following specifications. The outer frame will be 62x38x2mm @ 1.17 kg/m and the louvers with moving arrangements will be made with aluminium channel of size 60x30x4mm @ 1.27 kg/m with necessary louvers 4mm thick plain glass including all necessary accessories such as aluminium clips, labour ,power consumption charges required for fabrication, including dismantling and making good the dismantled portion etc., complete as directed by the departmental officers.( The aluminium section must be anodised with matt finish under electrically controlled condition in accordance with IS specifications 1868 / 1962 of anodic fill thickness of not less than 15 microns for all sections)

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter -Soild panel PVC Door without Frame

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc - Normal Operated

Supplying and fixing in position White / Colour Glazed ModeFloor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 5mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. (AS per SOR Specifications)

Supply and fixing of 300mm sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supplying and fixing of Split AC 2.0 Tonnage Capacity with copper coil - 5 Star rating including cost and conveyance of all materials to site and labour charges for fixing in position etc complete as directed by the Departmental Officers.

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting ( SD 87).

Supplying and Fixing of Cubicle with the following Specification - L Shape 1200Lx1200Wx1200HT Specification: System Partition - 70mm Slide based of 1200Ht, finished with Fabric above & laminate tile below table top with one Marker Board and Soft Board Tile. Table top - 25mm thick pre laminated particle board finished with 2mm edge lipping finish. Understructure - End Partition and fitted with suitable brackets whereever required. Wire Management - Raceway Below Table top and Skirting is considered only on Main Spine & rest with Skirting only. Power and LAN - 8 Modules with USB port with wiring for room only. The Model should be get approved from the Federation engineer

Supply and Fixing of AGM Cabin Table as per the Following Specification -Main Table- 1500L x 600D x 750ht. Side Storage - 900L x 400D x 750ht. Table top - 25mm thick MDF and 1mm both side laminate finished with 2mm edge lipping finish, Understructure - Gable End and 18mm thk PLT Modesty Panel. Storage- Storage top is made of 25mm thk MDF with rest alll made of 18mm thk MDF with Openable Shutters. Power and LAN - 8 Modules with USB port with wiring for room only. Wire Management - Raceway Below Table top and Skirting is considered only on Main Spine & rest with Skirting only. The Colour and model should be got approved from the fedeation engineer before installation

Supply and Fixing of CHAIRMAN AND GM Cabin Table as per the Following specification - Main Table- 2100L x 750D x 750ht. Side Storage - 1800L x 450D x 750ht. Mobie Pedest Support -Specification: Table top - 25mm thick Pre laminate particle board finished with 2mm PVC edge banded finish. Understructure - Storage top is made of 25mm thk PLB boards with rest alll made of 18mm thk PLB with Openable Shutters and One side Pedestal support. Storage- Storage top is made of 25mm thk PLB boards with rest alll made of 18mm thk PLB with Openable Shutters. The model should be got approved from the fedeation engineer before installation

Supply and fixing of the Storage cabinet of the following specification - Storage - 900L x 450D x 1200ht. 18mm Thk pre laminated particle board with openable shutters, adjustable shelves, and necessary handles with locks. The Colour and make should be got approved from the federation engineer

Supplying and fixing of WORKSTATION - JAZ with the following specification Medium IMPORTED Mesh Back Chair - MOULDED Cushioned Seat - Adjustable Lumbar Support - Gaslift - Synchro Mechanism - Adjustable Arms - Nylon BASE. The make and colour should be gor approved from the federation Engineer

Supply and Fixing of Chairman and GM Room Chair as per the following specification - CABIN -OPTIMA - Medium IMPORTED Mesh Back Chair - MOULDED Cushioned Seat - Adjustable Lumbar Support / 4 Way Adjustable Arm Pad - Gaslift - Multilock Mechanism - Adjustable Arms - Metal BASE.The Colour and model should be got approved from the fedeation engineer before installation

Supplying and fixing in position of aluminium anodized partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical members are spaced at 90cm c/c and to horizontal members are spaced at 1.20m, 2.10m and 2.40m height as per the requirements at the site and the bottom panels should be covered with 9mm thick PLB exterior grade and the top and middle panels should be fixed at 5mm thick glass with necessary glassing clips, rubber beadings etc., including necessary dismantling holes in the RCC columns, beams masonry wherever necessary with power drill to the extent required and make good the dismantled portion to original condition after fixing as directed by the Federation officers. Aluminum doors with 5mm thick glass of 6 numbers should be provided including necessary supports, hinges and floor springs wherever necessary etc complete as per the standard specifications.

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level completed as directed by the federation officers and standard specification

Supplying and Fixing of Vertical Blinds for existing Windows of various sizes of approved quality etc., complete as directed by the departmental officers and as per standard specification

Supplying and fixing of Toughened Glass for Conference room including Providing door of 12mm thick top & bottom teak wood finishing of 6" height and 2" breadth and the edges with high polish bottom 1'6" with designs etc., complete as directed by the departmental officers and as per standard specification

GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.)

CHINNA MUTHU

BHAKIYA ASSOCIATES