Thirupathur District, Jal Jeevan Mission 20-21 Providing Founctional Household Tap Connection in Kothakottai Panchayat at Alangayam Block Package No.02

Amount

Providing FHTC,Pipe line and Deepening of Existing Borewell at Munivouran vattam

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

supply and jointing 20mm ss/brass tab (local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

C C & BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Deepening of existing Borewell and New 7.50HP Submersible motor with GI Pipe and specials in Munivouran vattam

Supply and Delevery of Three phase submersible pump set having duty 7.5 HP 50LPMX250m head

7.50HP Panel board

4sq mm cable

50mmGI Pipe without Coupling

50mm GI Coupling

50mm GI Bend

50mm GI Gate valve

Bore cover plate

25mm GI Pipe for EB servicing

7/20 PVC Copper wire for EB Servicing

7/20 GI Wire for EB servicing

63 Amps Fuse unit

MS Clampset

Labour component

Flushing of Borewell of 6'' dia requiring less than 4hours operation using drill rods

Drilling of 150mm dia vertical bore well in Hard rock area by using rig including cost and conveyance etc

Labour charges for removing and Re errection of Three phase pumpset with GI pipe & cable connection etc

Construction of MS Kiosk

Water meter Pumping main line

Provision for water meter 50mm

Dirt box

Fitting charges of meter in OHT Column

Water meter Distribution of Main line

Provision for water meter 50mm

Water meter Dirt box

water meter Erection charges

water meter 90x75cm

Supply and laying Delevery pipe line

Earthwork excavation and deposting on bank with initial lead and 10m and lift of 2m in narrow trenches having bed with 1.25m and below for laying of pipes for water supply and sewerge works in the following type of soil directed by departmental officer measurmenr as pe surveying data with refrance to drawing

Supply and Delivery of 63mm dia PVC pipe as per IS 4985/part I/2000 including all conveyance chargess 4ksc ISI standard PVC pipe including all labour charges etc Complete

Laying and Jointing Pvc pipes and Specials in to the trench

Refilling the Trenches with available excavated soil

Supply and fixing of 63mm PVC Tee including all conveyence charge etc.

Supply and fixing of 63mm PVC Elbow including all conveyence charge etc.

Supply and fixing of 63mm PVC Bend including all conveyence charge etc.

Electro Choloranation disinfection common salt as per Tward SOR

Providing FHTC ,pipeline and Deepening of existing borewell and at Thoppulkaran vattam Habitation

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

supply and jointing 20mm ss/brass tab (local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

C C & BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Supply and laying Delevery pipe line

Earthwork excavation and deposting on bank with initial lead and 10m and lift of 2m in narrow trenches having bed with 1.25m and below for laying of pipes for water supply and sewerge works in the following type of soil directed by departmental officer measurmenr as pe surveying data with refrance to drawing

Supply and Delivery of 63mm dia PVC pipe as per IS 4985/part I/2000 including all conveyance chargess 4ksc ISI standard PVC pipe including all labour charges etc Complete

Laying and Jointing Pvc pipes and Specials in to the trench

Refilling the Trenches with available excavated soil

Supply and fixing of 63mm PVC Tee including all conveyence charge etc.

Supply and fixing of 63mm PVC Elbow including all conveyence charge etc.

Supply and fixing of 63mm PVC Bend including all conveyence charge etc.

Deepening of existing Borewell and New 7.50HP Submersible motor with GI Pipe and specials

Supply and Delevery of Three phase submersible pump set having duty 7.5 HP 50LPMX250m head

7.50HP Panel board

4sq mm cable

50mmGI Pipe without Coupling

50mm GI Coupling

50mm GI Bend

50mm GI Gate valve

Bore cover plate

25mm GI Pipe for EB servicing

7/20 PVC Copper wire for EB Servicing

7/20 GI Wire for EB servicing

63 Amps Fuse unit

MS Clampset

Labour component

Flushing of Borewell of 6'' dia requiring less than 4hours operation using drill rods

Drilling of 150mm dia vertical bore well in Hard rock area by using rig including cost and conveyance etc

Construction of MS Kiosk

EB Deposite

Labour charges for removing and Re errection of Three phase pumpset with GI pipe & cable connection etc

Water meter Pumping main line

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Water meter Distribution of Main line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Electro Choloranation disinfection common salt as per Tward SOR

Providing FHTC and Deepening of existing borewell at Veppampattan eri vattam Habitation

Providing FHTCs (8 m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

supply and jointing 20mm ss/brass tab (local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

C C & BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Deepening of existing Borewell and New 7.50HP Submersible motor with GI Pipe and specials

Supply and Delevery of Three phase submersible pump set having duty 7.5 HP 50LPMX250m head

7.50HP Panel board

4sq mm cable

50mmGI Pipe without Coupling

50mm GI Coupling

50mm GI Bend

50mm GI Gate valve

Bore cover plate

25mm GI Pipe for EB servicing

7/20 PVC Copper wire for EB Servicing

7/20 GI Wire for EB servicing

63 Amps Fuse unit

MS Clampset

Labour component

Flushing of Borewell of 6'' dia requiring less than 4hours operation using drill rods

Construction of MS Kiosk

Drilling of 150mm dia vertical bore well in Hard rock area by using rig including cost and conveyance etc

Labour charges for removing and Re errection of Three phase pumpset with GI pipe & cable connection etc

Water meter Pumping main line

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Fitting Charges of Meter in OHT Column

Water meter Distribution of Main line

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Water meter 90X75cm

Electro Choloranation disinfection common salt as per Tward SOR

Providing FHTC,New borewell and Deepening of Existing borewell at kothakottai Hapitation

Providing New Borewell with 7.5HP Motor with GI Pipe and specials

Supply and Delevery of Three phase submersible pump set having duty 7.5 HP 50LPMX275m head

7.50HP Panel board

4sq mm cable

50mmGI Pipe without Coupling

50mm GI Coupling

50mm GI Elbow

50mm Clampset

50mm Flange set

50mm Non Return Gate valve

Bore cover plate

25mm GI Pipe for EB Service

7/20 GI PVC Copper wire for EB Servicing

supply and 90mm PVC pipe(6ksc)

Labour component

Drilling of 150mm dia vertical bore well in over burden soil including cost and conveyance etc

Drilling of 150mm dia vertical bore well in Hard rock area by using rig including cost and conveyance etc

180mm PVC Casing pipe inserting charges

Labour charges for erection of 10HP Submersible pumpset with GI Pipe & cable connection

Earth work excavation deposting on bank with an initial lead and lift including cost and conveyance etc

Laying and jointing of PVC pipe into trench including cost and conveyance etc

Refilling the excavated earth work excavation depositing on Bank

Construction of masonry pedastal masonry work foe EB KIOSK

Deepening of existing Borewell and New 7.50HP Submersible motor with GI Pipe and specials

Supply and Delevery of Three phase submersible pump set having duty 7.5 HP 50LPMX275m head

7.50HP Panel board

4sq mm cable

50mmGI Pipe without Coupling

50mm GI Coupling

50mm GI Bend

50mm GI Gate valve

Bore cover plate

63 Amps Fuse unit

25 mm GI pipe for EB Servicing

7/20 PVC copper wire for EB Servicing

7/20 GI wire for EB Servicing

MS Clampset

Labour component

Flushing of Borewell of 6'' dia requiring less than 4hours operation using drill rods

Drilling of 150mm dia vertical bore well in Hard rock area by using rig including cost and conveyance etc

Construction of MS Kiosk

Water meter for Pumping main lines for/OHT

Provision for water meter 50 mm , page 81 of SOR TWAD

Ditr box

Fitting Charges of Meter in OHT Column

Water meter for Distribution main lines for/OHT

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Provision for pit for Water meter 90X75cm

Contingencies & Provision for Specials

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

supply and jointing 20mm ss/brass tab (local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

C C & BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Electro Choloranation disinfection common salt as per Tward SOR (60000 lit capacity)

Providing FHTC at Athukuttai habitation

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

supply and jointing 20mm ss/brass tab (local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

C C & BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Providing FHTC,Pipeline and Deepening of existing borewell at Boyer Colony hapitation

Providing FHTCs (8m length per FHTC)

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

supply and jointing 20mm ss/brass tab (local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

C C & BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Deepening of existing Borewell and New 7.50HP Submersible motor with GI Pipe and specials

Supply and Delevery of Three phase submersible pump set having duty 10HP 50LPMX250m head

7.50HP Panel board

4sq mm cable

50mmGI Pipe without Coupling

50mm GI Coupling

50mm GI Bend

50mm GI Gate valve

Bore cover plate

6 Amps Fuse unit

25 mm GI pipe for EB Servicing

7/20 PVC copper wire for EB Servicing

7/20 GI wire for EB Servicing

MS Clampset

Labour component

Flushing of Borewell of 6'' dia requiring less than 4hours operation using drill rods

Drilling of 150mm dia vertical bore well in Hard rock area by using rig including cost and conveyance etc

Labour charges for removing and Re errection of Three phase pumpset with GI pipe & cable connection etc

Supply and laying Delevery pipe line

Earthwork excavation and deposting on bank with initial lead and 10m and lift of 2m in narrow trenches having bed with 1.25m and below for laying of pipes for water supply and sewerge works in the following type of soil directed by departmental officer measurmenr as pe surveying data with refrance to drawing

Supply and Delivery of 75mm dia PVC pipe as per IS 4985/part I/2000 including all conveyance chargess 4ksc ISI standard PVC pipe including all labour charges etc Complete

Laying and jointing of PVC pipe into trench

Reflling the trenches with available excavated soil

Supply and fixing of 75mm PVC Tee including all conveyence charge etc.

Supply and fixing of 75mm PVC Elbow including all conveyence charge etc.

Supply and fixing of 75mm PVC Bend including all conveyence charge etc.

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

GSK CONSTRUCTIONS