Special repair of master sector dividing road between sector 17/18, Gurugram

Amount

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per technical clause 503 of MORT&H specifications

Providing and applying tack coat with penetration grade bitumen VG – 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications

Providing and laying 80 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORT&H specifications

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications.’

Providing and laying 40 mm thick bituminous concrete with 100-120 TPH batch type TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @5.40% percent by weight of mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade levevl and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per MORT & H specification clause No. 507 complete in all respect.

Carriage of Earth with a lead of 10 KM including Loading ,Unloading and stacking Complete in all respect.

providing and fixing of pre casted RCC cover slab of minimum size 0.9m x 0.30m x 0.12m with 3.24KG steel bar of 8mm/ 12mm and two Nos. Plastic balls and iron hooks including labour carriage and material complete all respect.

providing and fixing of pre casted RCC cover slab of minimum size 1m x 0.30m x 0.2m with 6 KG steel bar of 8mm/ 12mm and two Nos. Plastic balls and iron hooks including labour carriage and material complete all respect.

Carriage ,Loading ,unloading of Earth with a lead of 10 km including Loading ,Unloading and stacking Complete in all respect.

Carriage ,Loading ,unloading of lime mooram ,building rubish with a lead of 10 km including Loading ,Unloading and stacking Complete in all respect.

providing and fixing of pre casted RCC cover slab of minimum size 0.9m x 0.9m x 0.15m with 11 kg steel bar of 8mm/ 12mm and two Nos. plastic balls and iron hooks including labour carriage and material complete all respect.

Providing and fixing a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet double metal beam rail, 70 cm above road ground level, fixing on ISMC series channel vertical post , 150 x 75 x 5 mm spaced 2m centre to centre, 1.8m high, 1.1m below ground/ road level, all steel parts and filament to be galvanised by hot dip process, all fitting to confirm to IS:1367 and IS:1364.

Providing and Fixing Solar Delineator made of poly carbonate housing ABS Base. 100% water proof design confirms to IP65.Dimension:Dia: 90 mm, H: 165 mm, Shank Height: 70 mm. Unbreakable Poly Carbonate clear facings designed for maintenance free operation. Operation: Blinking or steady glow. High efficiency mono crystalline Solar Panel 3V / 120 mA. One Ni-Mh or Nicd rechargeable battery (1.2 V/1600 mA) high temperature. Four ultra bright surface mount 120 degrees, 8 lumens LEDs. View distance: UP to 800 m. Flash rate: 1 to 2 Hz. Color- Red, Amber. Working time: 60 to 72hours successively after the battery is fully charged. Charging Time: five to six hours /day. Working Temp: -40 degrees to 75 degrees. With fitting. Complete in all respect as per entire satisfaction of Engineer –incharge. Make - 3M, Avery Dennison, Dark Eye or equivalent

Bidder Name

Amount

P C Gupta and Co(GSTN-06AAEPG5955G1ZR)

COMPETENT CONSTRUCTION CO.(GSTN-NA)

P C Gupta and Co

P C Gupta and Co