Karnataka

Active

Works

Roads

Providing RO plant, high mast light and construction of cc road and laying pavers and renovation of toilets in PHC center at Nandoor B village in kalaburagi Taluka under DMF for the year 2025-26.

Rural Development and Panchayat Raj Department

RDPR Division Office Kalaburgi | Kalaburagi, Karnataka

Amount: ₹41.9 LCloses: 30 Jun 20262d left

Tender Value

₹41.9 L

EMD Value

₹84,000

Closing Date

30 Jun 2026, 9:30 pm2d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Providing RO plant, high mast light and construction of cc road and laying pavers and renovation of toilets in PHC center at Nandoor B village in kalaburagi Taluka under DMF for the year 2025-26.

Tender Information

Tender ID

307897

Reference Number

RDPR/2026-27/RD/WORK_INDENT27294

Tender Type

Open

Product Category

Roads

Location

RDPR Division Office Kalaburgi

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

Required1.The Tenderer shall have valid class III and above KPWD Licence

Required2.To qualify for award of this contract, Each tenderer in its name should have in the last five year 2021-22 to 2025-26 Achieved in at least TWO FINANCIAL years annual turnover not less than amount put to tender attach certificated from CA on Letter Head in all classes of civil engineering construction works only with UDIN No. otherwise bid will be directly Disqualified or Rejected

Required3.To qualify for award of this contract, Each tenderer in his name should have in the last five year i.e., 2021-22 to 2025-26 Satisfactorily completed, as prime contractor, at least One Similar Nature of work of value not less than 50 percent of work on amount put to tender attach certificate by not below rank of Executive Engineer with Indent No from e-Procurement Portal

Required4.Annexure1 As per Attached Bid document should be given on Rs.100/- Stamp Paper with notary

Required5.Accurate Bid Capacity on Bidder Letter Head

Required6.As prescribed format of KW Tender Bid Document bidder should give work in Hand and Tender Submitted Details in all Department along with Indent No. It not submitted the details bids will be rejected without any intimation

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Financial bids of the technically qualified bidders only will be opened

Right of acceptance or rejection of any or all tenders with or without any reasons is reserved with the undersigned or any concerned higher officers of the Department

Conditional tender will not be Considered

Tender processing amount will not be refundable

Contractors should have to upload the scan copy of all necessary qualification documents, and submit the original documents certificates while tender opening evaluation for verification

The Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

The liquidated damage for whole of the works are Rs. 0.10 percent per day the maximum amount of liquidated damages for the whole of works is 10 percent of final contract price

The agency shall furnish affidavit stating that existing commitments furnished by him are true. If found false action shall be taken as per law

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund

The Item Rates quoted shall include cost of Royalty charges on construction materials and other taxes as per the prevailing Government Orders at the time of execution and including cost and conveyance of all materials, curing, loading and unloading, with all leads and lifts, labour, hire charges of all machineries and equipments and all incidental charges etc complete necessary for completion of work. All the Items shall be executed as directed by the Engineer-in-charge of the work

The field laboratory shall preferably locate, adjacent to the site with the required amenity as per the clause

Self declaration of machineries are not accepted

The work should be completed within the stipulated period from the date of agreement and The date of agreement itself is the date of commencement of the work

Third party inspection is mandatory for all the works in this programme

The Tenderer shall obtain the work done certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required

Executive Engineer has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final

The bidder must submit 5 years Profit and loss account obtained from Chartered Accountant (CA) Only

The Furnished E.M.D. will be released only after successfully execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier

Before tendering for the works the tenderer may inspect the site personally

The successful tenderer shall maintain the work during the defect liability period of 365 Days from the date of completion of the work

The Tenderer shall have valid KPWD license

Other details and instructions shall be seen and fallowed as per the bidding documents KW

The Road / Building constructed under this programme shall be of high standard

Bidders should upload only prescribed documents for this work. If Unnecessary documents uploaded by the bidder then tender will be directly rejected and further correspondence will not be entertained declaration should be uploaded on bidders letter head duly signed

The work should be completed as per detail notification attached

All Rates included with all lead, lifts, loading and unloading charges, cost and conveyance of all materials, labour, equipments incidental Charges, etc., complete. and as per specification and directions of the Engineer incharge of the work

Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work if work is awarded Graduate / Diploma Engineer Civil 1 Nos. & Literate Assistant Any Degree Passed 1 Nos

All Terms and Conditions as per Bid Document

Incorrect Bid Capacity submitted by the Bidder will not be considered and the bid will be rejected

Bidders should upload only prescribed documents for this work if unnecessary documents uploaded then bid will be directly rejected

Profit and Loss Account / Audit Report Last 5 Year

Latest Income Tax

Name of the Equipment Machineries All machinery Documents are RC Book will be verified from E Vahan website

Arbitration Clause 24, As per Govt. Order LAQ LAC 198 2024 Dated 16.11.2024 (a)incorporations of Arbitration clauses in the Government Contractors / Tender in Exercise of the power conferred under the Section 21 of General Clauses Act, 1897 the Circular No.LAW 273 LAC 2012 (p) dt:10.01.2014 regarding incorporation of Arbitration in contract/tenders etc., is withdrawn with immediate effect

33.Payments 33.1 Payments shall be adjusted for deductions for advance payments other than recoveries in terms of contract and taxes, at source, as applicable under the law. The Employer shall as far as possible, pay the Contractor within 60 days of submission of bill. The contractor shall be liable to pay liquidated damages for shortfall in progress. For progress beyond the agreed programme, payment is subject to availability of the grants. (GOVERNMENT ORDER NO: FD 678 EXP-12/2023 BANGALORE, DATED:06.06.2025)

Fee & Financial Details

Tender Fee Amount

₹1,050

EMD Fee Amount

₹84,000

Important Dates

Last Activity

19 Jun 2026

Published

19 Jun 2026

Download Ends

30 Jun 2026

BOQ Preview

•

Construction of cc road

•

Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of s...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, s...

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

•

Construction of Subgrade and Earthen Shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading...

•

High mast light

•

Fabrication, Supplying, Erection, Testing and Commissioning of...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) t...

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarb...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. with all lead, lifts, loading & unload...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., co...

•

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. with all lead, lifts, ...

•

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

•

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

•

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 6 sqmm to 16 sqmmwith all lead, lifts, loading & unloading charges, cost...

•

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) Cutting road surface with all lead, li...

•

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable. with all lead, lifts, loading & unloading charges, cost and conveyance of all mat...

•

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 40mm with all lead...

•

Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing us...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates ...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. with all lead, lifts, loading & unloading ...

•

Supplying, fixing and wiring Earth Leakage Miniature CircuitBreaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 63 Amps 4 pole with all lead, lifts, loading ...

•

Direction and Place Identification Signs upto 0.9 m2

•

Size Board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

•

Providing and laying in position Reinforcement Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. T...

•

Centering Charges for Footing 3% with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments ncidental Charges etc., complete and as per specification a...

•

Centering Charges for Column 70% with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments ncidental Charges etc., complete and as per specification a...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,...

•

Providing and fixing Structural Steel work in single section, fixed

•

with or without connecting plate, including cutting, hoisting, fixing in

•

position and applying a priming coat of approved steel prim...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( 0.05 ) total coated thickness with zinc coating 120 g/m...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Water purification plants: Providing, Installation and Commissioning of

•

automatic Water purification plant (RO+UF) with all accessories piping,

•

product water tank on single phase power supply as per t...

•

Providing and fixing Chorinated Ploy Venyl chioride (CPCV) Pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings Th...

•

Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, includin...

•

Providing and fixing Duplex grade / 316 grade Stainless Steel water

•

storage loft tank of 1000 L capacity applicable for 500ppm & below TDS

•

built with 6 internal layers of SS 304 grade with cover as ap...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing white vitreous china pedestal type water closet

•

(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually co...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan )

•

with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

•

having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

•

Providing and fixing brass bib cock of approved quality with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments incidental Charges etc., complete a...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory ompaction laid in required...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

14 Works 30 June 2026.zip

Tender Document • 2.57 MB

Ready to Participate?

Download all tender documents and submit your bid