WBPWD/EE-II/CKHED/ eNIT-120/24-25

Amount

Dismentling of old & damage wiring, DBs, socket, lecture theatre old fitting, tube light with fittings, exhaust fan, cable, box, etc.

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10, 14] Incoming - 415V,63A, FPMCB Isolator (1-nos) [ D-5,6 ] (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (18-nos) [ D-6,7 ]

6 way [Legrand/ LK]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-9,13 ] Incoming - 230V,40A, DPMCB Isolator (1-nos) [D-5,6] Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (10-nos) [D-6,7]

2+10 way [Legrand/ LK]

Supply & Fixing of single LED Tube light fitting [Make - Philips cat no. TMC 501 P 1x T-LED / Wipro, cat no.WIO921208 /complete with 18/20 Watt LED tube lamps [Make - Philips LED tube model no.20W 865 T8 I 2100lm / Wipro cat no.- LL13-181-65SE ]/LIGHTING TECHNOLOGY with 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. and by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & fixing of Single LED Tube light fitting [Make - Philips cat no. TMC 501 P 1 x T-LED / Wipro, cat no.WIO921208]/LIGHTING TECHNOLOGY

Supplying & fixing of following 250 Volt, T8, 18/20 Watt, 4 Ft. long Double LED Tube fittings complete with LED tube lamp in built driver&metal heat sink(1200mm 18W 865 T8I-2100lm) x 2) having at least 110 lumen/watt and cast iron box type fittings.(Make- Philips cat no- TMC 502 2xT-LED 22W / LIGHTING TECHNOLOGY) [ Liability period 2-years] with 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. and by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing of Industrial type 4 feet, T8 Tube Light Shade with SS Reflector with special arrangement suitable for laboratory use with arrangement of standing for floor/ table as required with 12SWG hollow round/ rectangular SS pipe incl. all required accessories for supply & fixing of 4 feet 2x20 Wt. 220V-240V, 50Hz, 6500 K(Color Temperature) Twin indoor industrial type LED batten complete with all accessories with two 20 Wt. LED Tube lamp . The successful quotationer have to submit the drawing before execution from EIC for necessary approval. (Make- Philips cat no- 1200mm 18W 865 T8I-2100lm) x 2) /LIGHTING TECHNOLOGY having at least 110 lumen/watt and cast iron box type fittings & TMC 502 2xT-LED 22W of Wipro) , as directed by EIC.

Supply & fixing of 18/20 Watt LED tube lamp [Make - Philips Master LED tube model no.18W 865 T8 I 2100lm / Wipro cat no.- LL13-181-65SE ] /LIGHTING TECHNOLOGY

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [E-6, 18(a)]

Supply & fixing of 2.5 sqmm finishing of the PVC insulated wire ends by socketting with flat type copper sockets and insulated tapes etc. including supplying sockets, tapes.

Supply & fixing of 240V, 50Hz, 2.5 MFD P-2 type metal body Ceiling Fan Capacitor (M-Epcos)

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[E-5, 14(a)]

Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[E-5, 14(b)]

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [E-5, 15(a)]

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [E-5, 15(b)]

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-6, 21]

Supply & Fixing 240 V, 6 A Piano key type Plug socket (Make:- Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. [E-3,11(a)] & [E-5,15(a)]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-7,25]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

a) On board [E-15,4(a)]

b) Average ru 9 mtr E-15/ 5.(d)

c) Average ru 10 mtr E-15/ 5.(e)

Supply and Fixing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire(RR Cable/Finolex/ /Polycab/KEI/GLOSTAR) as approved by EIC) of the following sizes in 20mm/25mm/32mm the PVC Rigid Conduit 'FR' [Make-Precision] on wall, ceilling with saddle and other accessories as required and mending good damages to building works.

(a) 3x1.5 sqmm ECC [ E-9,1(b) & E-16,7(a) ]

(b) 2x2.5 sqmm+1x 1.5 sqmm ECC [ E-9,1(s) & E-16,7(a) ]

(c)2x6 sqmm+1x 4 sqmm ECC) [ E-9,1(y) & E-16,7(a) ]

(d) 4 x 16 sqmm + 2 x 10 sqmm ECC [ E-9,1(g1) & E-16,7(b) ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [ F-5,9 ]

(a) 2x2.5 sqmm+1x 1.5 sqmm ECC [ F-5,9(i)]

(b) 2x6 sqmm+1x 4 sqmm ECC) [ F-5,9(iii&ii)]

(c) 4 x 16 sqmm + 2 x 10 sqmm ECC [ F-5,9(v&iv)]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supplying & Delivery of 250 volts, 50Hz, 450 MM (18'') sweep 1420 R.P.M. heavy duty exhaust fan complete with all accessories & louver shutter after making hole on wall and mending good damages as per practicable incl.(Make-EPC) as to Gs.

Supplying & fixing of 250 volts, 50 Hz 1200mm (48”) sweep A.C. ceiling fan complete with all accessories viz. down Rod, Canopy, Fork etc. including connections as reqd. as per choice of E.I.C. (Make-Crompton rivera hi speed/ Orient Energy star)

Supply & Delivery of AC 250V,18'' Inch(450mm) dia,1420 RPM doubal ball bearing 4 blade full metal body wall bracket fan. [Make: EPC/Colour-Brown]as directed by EIC.

Rate is inclusive all taxes and cess

Defect Libility Period 1 year

STANDARD BUILDERS (BID ID -6193199)

EFFORTECH (BID ID -6201934)

STAAR CONSTRUCTION (BID ID -6189669)

B S ENTERPRISE (BID ID -6202356)

NEW MODERN COOLING (BID ID -6202347)

SILICON SOFTWARE (BID ID -6199667)