works

BLD-CSTN-2-2(10):Earth work excavation in Ordinary soils by Mechcanical Means-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308).

RBR-FNDN-4 I(i) : Providing P.C.C grade M 10 concrete in open foundations using 20 mm Graded HBG hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH for foundation and under flooring bed.

BRBR-FNDN-4 (iii): Providing PCC/RCC M15 nominal mix (1:2.5:5) prop. ( cement : fine aggregate : coarse aggregate) using 20 mm size graded HBG crushed metal including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc.,to site seniorage charges on all materials, labour charges for mixing, laying concrete,raming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work as directed by Engineer-in Charge

DOUBLE CROSS WALKER /SKY WALKER (LFI-44) Providing & Fixing Sky Walker made from G.I. pipe. Dimensions:(L×W×H)=1500×700×1800mm 1)Main Frame- Ø 114 mm OD G.I ("C" class)pipe. 2)Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3)Paddle Vertical support- Ø 48 mm OD "B" class G.IPipe. 4)Remaining Frame- Ø 60 mm and Ø 42 mm OD "B" class G.I Pipe. 5)Handle- Ø 33 mm OD "B" class G.I.Pipedually bending design. 6)Leg Movement frame-80 mm×40 mm×3.5 mm thick rectangular pipe. 7)Footrest-cast iron 320×155 ×2.5 mm thickness. 8)Bracket-6 mm thick laser profile is use to support leg movement frame.9) Top closing cap-dome shaped by SS material. 10)Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 11)Bearing Bushes-Ø 60 mm OD seamless pipe. Bearing bush closing caps- SS material. Grips-High Quality Rubber Ø 46 mm OD .Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade Δ 4.6galvanized. Maximum loading weight-240 kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

THAICHI SPINNER WHEEL (LFI-39) Providing and fixing Tai chi Spinner made from G.I. pipe. Dimensions:(L×W×H)=1350×1300×1600 mm 1)Main Frame-Made from G.I ("C" class) pipe Ø 114 mm OD. 2)Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3)Thai chi Ring Pipe- Ø 42mm OD "B" class G.I. Pipe. 4)Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 5)Bearing Bushes-Ø 60 mm OD seamless pipe. 6)Top Closing Caps-SS material. Handle Bars-High Quality Grip Rubber. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade Δ 4.6galvanized. Maximum loading weight-240kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

BOTTOM CHEST PULL (LFI-59) Providing & fixing Bottom Chest Pull as follows. Dimensions:(L×W×H)= 2300×980×2050mm 1) Main centre pipe- Ø 114 mm OD ("C" class) pipe. 2) Foundation plate- M.S. round plate of Ø 220 mm & 8 mm thick. 3) Handle-made up of Ø 42 mm OD "B" class pipe. 4) Link-made up of Ø 48 mm OD "B" class pipe. 5) Seat & back rest- 300×300×2mm thick seat with corner fillet for safety. 6) Bearing Bushes-Ø 125 mm OD pipe with 6 mm thickness. 7) Supporting Pipe - Ø 60 mm OD "B" class pipe. 8) Square Pipe - 60×60×3.5 mm is used to connect the frame. 9) INTERNAL LIMITORS is used for this equipment because at this stage maximum level reaches, if this is operated beyond the maximum level which causes to physical damage that’s y Limiters are used to resist an equipment. By using Limiters equipment can be handled smoothly. Top closing cap-dome shaped by SS material. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand.. Bearing bush closing cap- SS material. Coating-Best quality of powder coating 80-100 microns thickness. Maximum loading weight 240 kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

LEG EXTENSION(LFI-49) Providing and fixing Leg Extensionas follows.Dimensions:(L×W×H)=1000×620×910mm 1)MainFrame-Ø 114mmOD“C"classpipe. 2)FoundationPlate-M.SroundplateofØ220mm&10mmthickness. 3)Handle- made up ofØ 42 mm OD "B" class Pipe. 4)Seatframe-Ø 42mmOD"B"classPipe. 5)Seat-300×300 mm×2 mm thick with corner fillet for safety. 6)Leg Frame-Ø42mm OD"B"classPipe. 7)Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 8)BearingBushes-Ø 60mmODseamlesspipe Top Closing Caps-SS material. Coating-Best quality of powder coating 80-100 micronsthickness. Hardware-Grade Δ 4.6 galvanized. Maximum loading weight-120kg and only onepersoncan useatatime.SafetyInstructionsandExercisechart-start&finishposition stickonproduct

FUN RAIDER (LFI-64) Providing & fixing Horse Raider made from G.I. pipe. Dimensions:(L×W×H)=890×320×950mm 1)Main Frame- Ø 114 mm OD G.I ("C" class) pipe. 2)Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3)Remaining frame-Is made by Ø 48 mm OD "B" class G.I. Pipe. 4)Seat frame-Is made by Ø 42 mm OD "B" class G.I. Pipe. 5)Seat position must be horizontal to 110-120 degree. 6)Handle- Ø 33 mm OD "B" class G.I. Pipe. 7)Paddle Vertical support- Ø 60 mm OD "B" class G.I. Pipe 8)Handle frame- Ø 42 mm OD "B" class G.I. Pipe. 9)Foot pipe- Ø 33 mm OD "B" class G.I. Pipe. 10)Seat-5 mm thickness is used. Bearing bush closing cap- GI/SS material. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. Bearing Bushes-Ø 60 mm OD seamless pipe. Grips-High Quality rubber Ø 46 mm OD. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade Δ 4.6galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

ARM PEDAL BIKE (LFI-62) Providing & fixing Arm Pedal Bike as follows: Dimensions:(L×W×H)=990×500×880mm 1)Main Frame-Made from ("C" class) pipe Ø 114 mm OD. 2)Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3)Handle- Ø 33 mm OD "B" class Pipe. 4)Side and top cover- 1.6 mm thick MS laser cutting profile is used. 5)Seat- 6 mm thick MS laser cutting profile is used. 6)Paddle – 100 mm×50 mm capsule pipe and 40×16 mm MS flat is used for connecting the paddle and shaft. 7)Bearing-Deep Groove Self Aligning Ball Bearings with permanent lubricated reputed brand. 8)Bearing Bushes-Ø 60 mm OD seamless pipe. 9)Shaft- Made up of Ø 25 mm OD MS bright bar. Grips- High Quality rubber Ø 46 mm OD. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade Δ 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart – start & finish position stick on product

TWISTER MULTIPLE(LFI-55) Providing & fixing Twister multiple (2 standing and 1 sitting ) from G.I. pipe. Dimensions:(L×W×H)=1550×1550×1300mm 1)Main Frame-Made from G.I ("C" class) pipe Ø 114 mm OD. 2)Foundation Plate-Fibre round plate of Ø 220 mm & 10 mm thickness. 3)Seat plate support - Ø 60 mm OD "B" class G.I. Pipe. 4)Twister plate is made up of Fibre. 5)Seating ring- Ø 33 mm OD "B" class G.I. Pipe made by rolling. 6)Seating ring support - Ø 33 mm OD "B" class G.I. Pipe. 7)Remaining Frame – Is made by Ø 60 mm OD "B" class G.I. Pipe. 8)Seating seat position and other two standing position plates are fixed 120 degrees each from other. 9)Handle- Ø 33 mm OD "B" class G.I. Pipe made by rolling. Top closing cap-dome shaped by GI/SS material. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. Bearing Bushes-Ø 60 mm OD seamless pipe. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade Δ 4.6galvanized. Maximum loading weight-360kg and only three persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.