COMPREHENSIVE MAINT OF CERTAIN BLDGS UNDER AGE BR II AT RMS

Amount

M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers without using extra cement using water proofing compound @ 3% by wt of cement for finished even and smooth including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed.

M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement complete all as specified and as directed.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches complete all as specified and directed.

M&L Brick work with sub class B brick straight or curved on plan exc 6.00 m mean radious built in CM (1:6) including demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches complete all as specified and directed.

S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M&L for second class hardwood as in scantlings clean sawn timber fixed including dismantling old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and directed.

S&F size of frame 125 x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed.

S&F for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and directed.

M&L for sheet glass 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S & F 75 mm size stainless steel butt hinges complete all as specified and directed etc complete all as specified and directed.

S & F 100 mm size stainless steel butt hinges complete all as specified and directed etc complete all as specified and directed.

Supply & Fixing 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

Supply & Fixing 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S & F 100 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint incl primer complete all as specified and directed.

M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface complete all as specified and directed.

M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

All as per item No 27.00 (here-in -before) but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces

M&L preparation of old surfaces of walls applying one coats of cement base paint complete all as specified and as directed.

M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oil bound distemper on walls all as specified and directed

Demolition, Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

M & L for cement concrete (1:3:6) type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even complete all as specified and directed.

M&L for Cement concrete type B-1 (1:2:4), as in levelling course (using 20 mm graded stone aggregate), 25 mm thick complete all as specified.

M&L for Vitrified Ceramic tiles (Light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. set and jointed in neat cement slurry over screed bed of 15 mm thick (1:6) and pointed in white or coloured cement to match including dismantling of old tiles from its position complete all as specified.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick CM (1:4) screed bed including dismantling of old tiles from its position all as specified and as directed.

All as per Serial item No. 35 above but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old tiles from its position all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat etc including dismantling of old tiles from its position all as specified and as directed..

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed or bedding layer in cement mortar (1:6) including dismantling of old tiles from its position all as specified and as directed.

All as sper Serial Item No. 38 above but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old tiles from its position all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and directed.

M&L cement concrete type C-2 (1:3:6) (40 mm graded coarse stone agg) as in surface channels and drains etc including demolition of old from its position complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and directed.

Demolition, Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

M&L for Cement concrete type B-1 (1:2:4), as in levelling course (using 20 mm graded aggregate), 40 mm thick complete all as specified.

M&L for PCC (1:4:8) type D-2 75 mm thick (40mm graded cvoarse stone aggregates) as in sub base of floor etc complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor finishes etc complete all as specified and directed.

M & L for chequered cement concrete tiles of Size 25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

M&L TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for precast cement concrete type B1 (1:2:4) (Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and directed.

M & L for High density poly ethylene pipes Dia 15 mm (HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc including taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing etc complete all as specified and directed.

M & L for High density poly ethylene pipes Dia 20 mm (HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc including taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing etc complete all as specified and directed.

S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc including taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing etc complete all as specified and directed.

S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc including taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing etc complete all as specified and directed.

Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and directed.

M&L in repair for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed.

M&L in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe incl Urinal spreader complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified (Make Cera, F1020106) complete all as specified and directed.

S&F in repairs for 15mm dia of pipe CP bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.

S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and directed.

S & F for Angle stop valve 15 mm dia of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms etc complete all as specified and directed.

S & F for Waste coupling of 32 mm dia PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) etc complete all as specified and directed.

S & F for Waste coupling of 40 mm dia PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms) etc complete all as specified and directed.

S&F in repairs Brass chromium plated toilet paper holder all as specified and as directed

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete.

S/F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as spfd & directed

Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified.

S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc complete all as specified and directed.

S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor (1:3) with MS screwscomplete all as specified.

S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers etc complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and directed.

S&F of 110mm dia PVC (SWR) bends etc complete all as specified and directed.

S&F 75mm PVC(SWR) bends any radius with acess door etc complete all as specified and directed.

S&F of 75mm dia PVC (SWR) Vent cowl etc complete all as specified and directed.

S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof etc complete all as specified and directed.

M&L dismantling water tank of exc 250 ltr and not exc 500ltr Capacity etc complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed.

S & F in repairs, 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping complete all as specified.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc including taking down old cement plaster on brick walls including raking out joints , hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc including taking down old cement plaster on brick walls including raking out joints , hacking for key, scrubbing down with water complete all as specified and directed.

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.

S&F in repairs pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F in repairs pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0 etc including dismantling of old one from itds position complete all as specified and directed.

S & F Rolled mild steel in Fe 410-W(Gde-E-250) Quality A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc including dismantling of old one from itds position complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20mm thick screed bed in CM (1:3) complete all as specified and directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

M&L in repairs Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed.

M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats etc complete all as specified and directed.

S&F in repairs One Piece Closets vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover cetc complete all as specified and directed.

S&F in repairs WHB Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dia of pipe etc complete all as specified and directed.

S&F in repairs Wall mounted CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dia of pipe etc complete all as specified and directed.

S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed.

M/S SHANTI UDYOG (BID ID -3518729)

Rameshwar Prasad (BID ID -3517942)

Shri B K Ukil (BID ID -3517764)

sanjay kumar (BID ID -3518534)

CHANDRADEO PRASAD (BID ID -3518662)

M/S SANGITA TRADERS (BID ID -3518300)

SK SINGH (BID ID -3517933)