Installation of 6 Nos. Submersible Pumps at various sub-division /site offices under MGD-1, CWC in Uttar Pradesh

Amount

Boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in borewell, unplasticized PVC medium well casing (CM) pipe of requireddia, conforming to IS: 12818, including required hire and labourcharges, fittings & accessories etc. all complete, for all depths, asper direction of Engineer -in-charge. 100 mm nominal size dia

G.I. pipes 32 mm internal dia Good Quality

Supplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ibs, conforming to IS: 12818, including hire & labour charges, fittings &accessories etc. all complete, for all depths, as per direction of 100 mm nominal size dia

Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading& sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sandcontent (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fullydeveloped, measuring yield of well by "V" notch method or any otherapproved method, measuring static level & draw down etc. by stepdraw down method, collecting water samples & getting tested inpproved laboratory, i/c disinfection of tubewell, all complete, includingire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge.

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 100 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 100mm clamp

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 100 mmm dia

GI socket 32 mm

Brass Ball valve 32mm

Providing Submersible pump 1 H.P.( CRI make)

Cable wire 10mm

Hanging wire

Starter

Cost of Hand Pump( India Mark)

Cylinder 63 mm complete set

Connecting Rod 12 mm dia with socket

Installation of Hand Pump & Submersible pump charges (Labour charges)

Making of hand pump plate form2*2.5*0.3 m & finishing ,including cost of material , all complete of work .

Providing and fixing 500 liter capecity water syntax Tank double layer with lid

Providing and fixing 1'' dia PVC good quality water supply pipe

PVC Socket 1'' dia

Pvc 1'' dia bend

Pvc 1'' dia Tee

1/2 '' dia PVC pipe for supply

PVC Socket 1/2'' dia

Pvc 1/2'' dia bend

AINFI ENTERPRISES PRIVATE LIMITED