Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹16,000
Closing Date
26 May 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
AEE-1
Providing Additional 2Nos of 11kV, MEI Make, 350MVA, 800A,20kA PCVCB type Switchgear for bifurcation of overloaded existing feeders at 110/11 kV S/s Doddaguni in Nittur Nodal Center, KPTCL, Operation Division Tumkur.
KPTCL/2025-26/SS/WORK_INDENT2225
KPTCL/2025-26/SS/WORK_INDENT2225
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Tumkur
4 documents required · 0 mandatory · 4 optional
Department Registration Details
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
Certificate for having executed similar nature of works successfully/satisfactorily issued by an officer not below the rank of an Executive Engineer(Ele)., of an Electrical Utility be uploaded
a.Bidder shall be financially sound and shall submit Audited financial statements including Balance sheets, Profit and Loss statements, Turn Over Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder. b.Average Annual Turnover (AAT) of the bidder for best two years out of preceding five financial years (2019-20 to 2023-24) ending on March or December as the case may be, shall not be less than Rs.21.29 Lakhs
The Tenderer should possess valid Super Grade Electrical Contractors License issued by the Government of Karnataka as on the date of Bid Submission and shall upload the same along with other bidding documents failing which the offer will be rejected
GST Registration Certificate and Pan
Self-Declaration for not black listed by any Govt. organization/Board/Company/any other sector
ESI and EPFO Registration Certificate
An undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR
Self-declaration for Risk & Cost
Self-declaration for Litigation or arbitration with respect to KPTCL contractors over the last two years
Valid Certificate of the Registered Company/Firm issued by labour department (Form-C).
Technical Schedule-I,II & III.
No deviation certificate
Proforma of under taking
Audited financial Turnover statement for preceding Five years
All the Documents as per QR of NIT.
₹500
₹16,000
10 May 2025
10 May 2025
27 May 2025
15 May 2025
Providing Additional 2Nos of 11kV, MEI Make, 350MVA, 800A,20kA PCVCB type Switchgear for bifurcation of overloaded existing feeders at 110/11 kV S/s Doddaguni in Gubbi Nodal Center, KPTCL, Operation Division Tumkur
Supply of Copper Control Cables 1.1KV class PVC insulated Copper control cables with Lugs/ferrules /Glands as per the technical specifications-19CX2.5Sq mm.
Supply of Copper Control Cables 1.1KV class PVC insulated Copper control cables with Lugs/ferrules /Glands as per the technical specifications-4CX 6.0Sqmm
Supply of Copper Control Cables 1.1KV class PVC insulated Copper control cables with Lugs/ferrules /Glands as per the technical specifications-2CX2.5sqmm
Supply of RCC pole 9 mts long 150 Kgs working load for ODS.
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL for Yard light
Beams madeout of channel 100 x 50 mm with arrangements for stringing power conductor on 11 KV side- 11 kV, 400 Amps Single Break Polymer Type Post Insulators GOS
Beams madeout of channel 100x 50 mm with arrangements for stringing power conductor on 11 KV side-11 kV, 400 Amps Double Break GOS
Supply of H Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation)-GI
Supply of DP Structure kit set (2 Pole Strucrure Kit) as per IS-1977-GI
Supply of Drake ACSR Conductor with acessories. (Mts)
Supply of Coyote ACSR Conductor with acessories (Mts)
Supply of Disc insulator 90KN.
Supply of Single Tension Clamps for Drake ACSR with bolt and Nut type.
Supply of Single Tension Clamps for Coyote ACSR with bolt and nut type.
Supply of Power connectors T clamps single drake to single coyote.
Supply of C-Type Wedge Connector Coyote to Drake ACSR Conductor
Supply of C-Type Wedge Connector Coyote to Coyote
Supply of Pad clamps for Coyote ACSR.
Supply of Earthing name plates, danger plate and Painting feeder name on switchgear and annunciation desk. DP feeder name plates including printing of letters, painting and board for new earthing pits...
Supply of RCC Pole Clamps
Supply of GI fish Plate
Supply of galvanised Bolt and Nuts
Supply of Universal Hook and Bolt and Nut complete the work
Supply of Braided earth bond 300mm long
Supply of 11KV LAs 9KV,5KA class for DP Structures (Metal Oxide type) Common
Supply of 95 Sqmm Aluminium lugs for connecting LA Common
Supply of Mutli Functional Transducer (MFT) 0.2S class for new bay integration to existing SCADA Panel
Supply of Opto coupler, 110 VDC for 66 kV sub-station for new bay integration to existing SCADA Panel
Supply of 4CX 4.0Sqmm Copper Cable for CT Termination for new bay integration to existing SCADA Panel
Supply of 4C X2.5 Sqmm Copper Cablefor PT termination for new bay integration to existing SCADA Panel
Supply of Signal/communication cables -Armoured copper core with 0.5 sqmm cross section multistrand 10 core for new bay integration to existing SCADA Panel
Supply of Control cables-copper core with 10Cx1.5Sq mm multistrand, conforming to
KPTCL specification for new bay integration to existing SCADA Panel
Erection of 11kV outdoor switchgear-Erection, alignment and fixing to the foundation, outdoor switchgear unit including movement from the point of unloading to the point of erection (Per panel)
Erection, alignment and fixing to the foundation of announciator panel (11kV kiosk) including movement from the point of unloading to the point of erection (Per panel)
Wiring & Assisting in Testing and Commissioning-11 kV Indoor / Outdoor Switchgear (Per panel)
Wiring & Assisting in Testing and Commissioning 11kV kiosk Annunciator Panel (Per panel)
Laying of control cables from equipments to panels-19C X 2.5Sq mm.
Laying of control cables from equipments to panels-4C X 6.0Sqmm.
Laying of control cables from equipments to panels-2Cx2.5sq.mm
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth
Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5Mtr depth
Fixing of GOS set including wiring (11 kV Double Break 400Amps)
Fixing of 3Nos Lightning Arrestor including wiring (Set/3Nos)
Gronding of equipment with 50X6 mm GI flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting...
Grounding of equipment by providing cast iron pipe of 100mm ID 13mm thickness, 2.75metre long with 2 part clamp out of GI Flat 50X6mm continuously welded alround the pipe using cast iron welding elect...
Earthing name plates, danger plate and Painting feeder name on switchgear and annunciation desk. DP feeder name plates including printing of letters, painting and board for new earthing pits(2feetX1fe...
Erection of CTs and PTs and wiring including movement from the point of unloading to the point of erection.(03 Nos)
Laying of cables for SCADA control 4CX4.0sqmm
Laying of cables for SCADA control 4CX2.5sqmm
Laying of cables for SCADA control 10CX0.5sqmm
Laying of cables for SCADA control 10CX1.5sqmm
Fixing, configuration and commissioning of MFT
Fixing, configuration and commissioning of Opto coupler Common
Configuration of RTU and Engineering along with validation of data at SLDC
Supply and fixing of 150 watts LED flood light with operating voltage 90/270 volts confirms to IP65/66 the body which is made up of pressure die cast aluminum with tilting angle of 180 degree and sur...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Formation of Bus bar Main Bus/Cross bus (all the three Phases in a segment) using Falcon/Drake/ Lynx/ Coyote-single/ Double conductors with fixing of insulator spacers, levelling of string conductors ...
Formation of Bus bar Main Bus/Cross bus (all the three Phases in a segment) using Falcon/Drake/Lynx/ Coyote-single/Double conductors with fixing of insulator spacers, levelling of string conductors to...
Loading of CI Pipes etc
Transportation of materials from A.N.Halli store to Site Using 10MT Lorry, to and pro with distance of 50KM.
Un-Loading of CI Pipes etc.
wiring testing and ommissioning as per item no C1 in estimate (Each)
Civil Portion-Earth work excavation by manual means for drains, canals, waste weir,draft, approach channels,key trenches, foundation of bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/ basalt rushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...
Civil Portion-Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine...
Civil Portion-Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...
Civil Portion-Disposal off the excess excavated earth of all types by vehicle including loading, unloading with all lead and lifts, labour, HOM of machineries etc. a) Earth Disposal for 1 Kms
Civil Portion-Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchor...
Civil Portion-Jelly Spreading (20-25 mm) Supplying and providing jelly in the station yard of uniform thickness of 100mm including the cost of materials, labour charges, required tools and plants etc ...
Civil Portion-GI Flat Grounding of Equipment with 50X6mm GI flat and connecting to the equipement to the earthmat / ground pit. Each point of earthing with all formation works like bending, twisting, ...
Civil Portion-Supplying and laying of PVC Pipe Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying tru...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2.Tender Doc - ITB, GCC, IFC Etc Doddaguni.doc
Others - 2.Tender Doc - ITB, GCC, IFC Etc Doddaguni • 0.17 MB
3.Techno commercial bid schedule (i-iii)-Doddaguni.xlsx
Others - 3.Techno commercial bid schedule -Doddaguni • 0.02 MB
1.NIT-f Doddaguni.doc
Others - 1.NIT-f Doddaguni • 0.13 MB
5.No deviation certificate.doc
Others - 5.No deviation certificate • 0.03 MB
4.letter of under taking of firm.doc
Others - 4.letter of under taking of firm • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .