03/SE12/2017-18

Amount

Hiring of Diesel pump for Dewatering including suction and delivery pipe, operator & khalasi and P.O.L. complete with all respect.

Dismentalling brick work in cement mortar including all labor with T&P as directed by Engineer In charge with Disposal of refuse.

Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge with in distance of 60m.

Dismantling Tiles work in floors laid in cement mortar including stacking material with in 50 Mtrs lead. For thickness of tiles 10 mm to 25 mm.

Dismentalling Cement Concrete in cement mortar including all labor with T&P as directed by Engineer In charge with Disposal of refuse.

Earth work in Foundation with lead upto 30 mt. and lift upto 1.5 mt. including all labour material T&P required for proper completion of work.

E/W in Refilling with mechanical compaction & dressing including all cost of labor T&P & etc.

E/W by power transport in making ramp and banks etc with excavation including loading, unloading, dressing Mechanical compaction & royalty all lead & lift etc

Providing & laying of lean Concrete in 1:4:8 with cement, Coarse sand, stone ballast, etc including all the cost of material labor & T&P.

Ist Class Brick work in 1:4 Cement Mortar including all material , labor T&P etc.

12 mm thick cement plaster in 1 : 4 cement, Coarse sand mortar including all the cost of labor material and taxes etc.

Making Sub Grade in Lining Work including watering , compaction and preparation of surface.

Supplying & laying of LDPE Film 200 Micron of Ist grade including all tax and contractors profit.

Providing and laying Concrete M-25 including all labour material T&P required for proper competion of work.

Providing and binding Steel Reinforcement in R.C.C. works including cutting fixing in position bending etc. required for proper completion of work including all lead lift labour material T&P etc.

Providing and filling in position bitumen mix filler of Proportion 80 kg. of hot Bitumin, 1 Kg of cement and 0.25 cubic mt. of coarse sand for depth per expansion joint.

Providing and laying “brick coba” 12 mm. thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cmx30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc. complete for proper completion of work. (OVER ALL RATE )

Centering & shuttering for R.C.C. Work including all labour material T&P with all lead and lift required for proper competion of work.

Providing and applying plaster of putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm

White Vitreous China Angle back wash basin size 600 x480 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

P/F 15 mm Nominal hole size C.P. Pillar each cock

P/F 25 mm dia. full way gate valve with all M/L/T&P etc

P/F chromium plated bib cock, complete with all materials.

P/F in position C.P. brass towel rail complete with brackets including making chases in walls and repairing the same in 1:3 CM complete. (750x20 mm).

P/F P.V.C. waste pipe for sink and wash basin including cost of all material, labour, T&P etc.

P/F concealed G.I. Pipes 15 mm dia complete with fitting & clamps, including cutting and making good the surface of walls etc. complete. (Internal works)

P/F concealed G.I. Pipes 20 mm dia complete with fitting & clamps, including cutting and making good the surface of walls etc. complete. (Internal works)

C.P. Teak wood wrought framed and fixed including simple moulding straight work as in chaukhats including labour and T&P etc. required for proper completion of the work but excluding cost of materials.

Providing and fixing 35 mm thick flush door shutters including ISI marked Stainless Steel but hinges with necessary screws ISI markedconforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

Varnishing with varnish of approved brand and manufacture :

Wiring point for light with 1 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. Same as in item 138 (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside.

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. Same as in item 140 (B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Wiring point for plug with 1 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with14 SWG copper earth continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash. Same as in item 141(B) but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. As in item no. 221(B) but in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core aluminium conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect.As in item no. 222 (B) but in 25 mm dia heavy duty (2 mm thick) PVC conduit with one number 4 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

S&F of 63 Amp. 4 pole MCB(10 KA) C Curve CAT B

S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve CAT B

S & F surface/Flush mounting 6ways TPN distribution board without additional board without MCB complete in all respect, as directed at site by Engineer in charge. CAT B

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light complete including tube etc on surface complete in all respect. CAT-AA

Supply and fixing of recess mounting round Ceilling cutout 160 mm height 55 mm 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT-AA

Construction of recess of 480mm x 480mm x 200mm size for fixing of main boards, distribution boards of all sizes including cutting of brick work, providing lintel of suitable size and thickness, plastering etc. with supply of all materials labour T&P for proper completion of work.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sq. mm 4 core

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 10 sq. mm 4 core

Supply of Ceiling fan 1200mm with regulator

Supply of Exhaust fan 600mm complete in all respect

Supply of Bracket Light With necessary fitting

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

Supply and laying of one 8swg GI wire in 25mm dia GI pipe from earth electrode directly in the ground as required complete in all respect.

M/S MOHD YUNUS CONSTRUCTION