Augmentation of Building Materials for PWD Punja in Central Jail 7, Tihar, New Delhi. SH Supplying and stacking of Materials for annual consumption.

Amount

Supply and stacking of following building material of approved brand and manufacture (bearing ISI Mark and full filling relevent standards of ISI specification) at site, sample of each and every material has to be got approved from the Engineer-in-charge in writing before bulk supply and incase of paint, OBD and similar material vouchers are also to be deposited along with material. Payment will be made only after supply of all the material in full and good condition at once. Dehradun white lime.

Synthetic enamel paint in all shades except black or chocolate shade (4 litre drum)

Turpentine oil (5 litre cane)

Plaster of Paris

White Cement

Oil Bound Washable Distemper/Acrylic distemper (20 kg drum)

15mm PTMT Bib Cock

Coarse sand (zone III)

Fine sand (zone IV)

Stone Aggregate (Single size) : 20 mm nominal size

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Brass full way valve with C.I. wheel (screwed end) 32 mm dia

Brass full way valve with C.I. wheel (screwed end) 40 mm dia

PTMT push cock 15 mm dia

PTMT pillar cock

15 mm dia PTMT stop cock(male thread)

White lead (Safeda) (500 grm each)

Polyethylene water storage tank with cover and suitable locking arragement (500,1000 & 2000 litre capacity)

100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet

G.I. Pipe

15 mm dia. Nominal bore

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

Ordinary Portland Cement 43 grade

Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia

Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia

PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium Rod & H.D. Ball

15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

PTMT - Waste Coupling

PTMT - Waste Coupling 31/32 mm

PTMT - Waste Coupling 38/40 mm

Acrylic Exterior Paint

Common burnt clay F.P.S. (non modular) bricks class designation 7.5

Glue (Fevicol) (4 kg packet)

Color tube ( Red, Yellow, Blue ) 200 grms

Sand paper of different numbers (50/80/100/200)

Painting Brush

Birla putty (20 kg)

Dhoti -4000x1200 mm size

Brass full way valve with C.I. wheel (screwed end) 15 mm dia

Brass full way valve with C.I. wheel (screwed end) 20 mm dia

G.I. Socket

15mm dia. Nominal bore

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

G.I. Elbow

G.I Nipple

15mm dia, 50 mm long

15mm dia, 80 mm long

15mm dia, 100 mm long

15mm dia, 150 mm long

15mm dia, 230 mm long

20mm dia, 50 mm long

20mm dia, 80 mm long

20mm dia, 100 mm long

20mm dia, 150 mm long

20mm dia, 230 mm long

25mm dia, 50 mm long

25mm dia, 80 mm long

25mm dia, 100 mm long

25mm dia, 150 mm long

25mm dia, 230 mm long

32mm dia, 50 mm long

32mm dia, 80 mm long

32mm dia, 100 mm long

32mm dia, 150 mm long

32mm dia, 230 mm long

SFRC Manhole cover ( 640 x 460 LD Rectangular)

SFRC Gully Trap Cover 300 x 300

Hexa Nipple

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

40mm dia. Nominal bore

Tank Nipple

20mm dia. Nominal bore

25mm dia. Nominal bore

32mm dia. Nominal bore

40mm dia. Nominal bore

G.I. Reducer Socket

20mm X 15mm dia. Nominal bore

25 mm to any smaller size

32 mm to any smaller size

Soot gola (Pkt of 24 Nos.)

M.Seal

Stainless Steel WC (ISI mark)

Dye set for Cutting G.I. pipe from

15 mm to 25mm dia

32 mm to 50mm dia

Heck Saw Blade ( Double Sharp )

Acrylic sheet (4mm thick)

Stone cutter Blade

Iron cutter Blade 4 inch

PVC Water Tank Cover (500 Litre capacity)

G.I. Plug

Set of Pipe Rinch 3 Nos. for pipe dia upto 50 mm, for 80 mm and upto 150 mm

CPVC solvent 100 grm pkt

CPVC elbow 20 mm of one side brass and other side plain (Female)

CPVC elbow 25 mm of one side brass and other side plain (Female)

CPVC elbow 32 mm of one side brass and other side plain (Female)

CPVC elbow 40 mm of one side brass and other side plain (Female)

CPVC socket 20 mm of one side brass and other side plain (Female)

CPVC socket 25 mm of one side brass and other side plain (Female)

CPVC socket 32 mm of one side brass and other side plain (Female)

CPVC socket 40 mm of one side brass and other side plain (Female)

CPVC Union 20 mm

CPVC Union 25 mm

CPVC Union 32 mm

CPVC Union 40 mm

CPVC Tee 20x20x20 mm

CPVC Tee 25x25x25 mm

CPVC Tee 32x32x32 mm

CPVC Tee 40x40x40 mm

CPVC Tee 25x25x20 mm

CPVC Tee 32x32x25 mm

CPVC Tee 40x40x32 mm

CPVC Tee 40x40x25 mm

CPVC gate valve 20 mm

CPVC gate valve 25 mm

CPVC gate valve 32 mm

CPVC gate valve 40 mm

Plyer (Tota Plas)

Chaini 10" long

Heck Saw frame

File (Reti) 150 mm long

Iron mesh for screen the sand fixed with wooden frame of size 4'x4'

Steel measuring tape 5 metre long

Basuli with wooden handle

Kassi with wooden handle

Plumb bob (Saul) i/c thread

Karni of size 5"

Karni of size 8"

Iron/G.I. Sheet Tasla of size 16" dia (approximately weight 8 to 10 kg each).

Chalk Mitti.

Scrapping patti of M.S. sheet size and thickness as per approved manufacturers.

KAILASH CHAND AND SONS

Shri Surendra Singh