8866/E8

Amount

Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed.

Taking up or down Steel Water Tubing 32mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings up to G+9 stories height , Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly.

Taking up or down Steel Water Tubing 40mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings up to G+9 stories height , Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly.

Taking up or down Steel Water Tubing 50mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings up to G+9 stories height , Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly.

Demolition and breaking up 150mm bore drain pipes (salt glazed ware, AC or reinforced concrete ) set in cement mortar complete all as specified and as directed.

Surface excavation not exc 30cm deep and avg 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes, cable etc. or for laying of water supply pipe/ UG cable not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed.

Removing excavated material ( soils of any type) n exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L Plain Cement Concrete type D2 (1:4:8) using 40 mm graded aggregate as in Foundation, Filling and Mass Concrete, complete all as specified and as directed.

M&L Plain Cement Concrete type B-0, (1:2:4) (12.5mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed.

Taking up old manhole cover with frame and raising / refixing proper position, set in CM 1:3 and hunching with PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggr) concrete surround finished even and smooth and refixing the manhole cover with frame of manhole size of 1.2m X 1.2m or 0.9m x 0.9m complete all as specified and directed

M&L Reinforced Cement Concrete (Design Mix) M-25 in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L Reinforced Cement Concrete (Design Mix) M-25 in Columns, Pillars, Piers, Posts and Struts, etc. complete all as specified and as directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L Reinforced Cement Concrete (Design Mix) M-25 in Roof Beams, Cantilevers, Bres-summers, Lintels over 1.50 Metre Span, complete all as specified and as directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L Reinforced Cement Concrete (Design Mix) M-25 as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L Reinforced Cement Concrete (Design Mix) M-25 in Chajja / kitchen rack etc., complete all as specified and as directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L Cutting chases, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for concealed water pipe etc. and making good cutting not exc 10Cm girth complete all as specified and directed.

M&L fly ash bricks pulverizes using class designation 75 bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified and directed.

M&L Brick Work Except bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

Use and waste of Formwork to Sides of Concrete Founda-tions, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

Use and waste for Formwork to Soffits of suspended slab such as Roof slab, Floor slab, landings and similar works horizontal or sloping etc., not exceding 200mm thick ,flat rough finished surfaces of concrete, complete all as specified and as directed.

Use and waste of Formwork to Sides and Soffits of Floor or Roof Beams, Beam Haunchings, Girders, Bres-Summers, Lintels, Cantilevers, Shelves including supports, overhangs, etc. also splays between floors and beams, etc., flat, rough finished surfaces of concrete, upto 04 storey high of building) complete all as specified and as directed.

Use and waste of Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

Use and waste of Formwork to Chajjas and Similar Items including edges, flat, rough finished surfaces of concrete, complete all as specified and as directed.

S&F Aluminium door with powder coated anodized aluminium frame of section size 101.60 mm x 44.75 mm x 2.4 mm (jindal section 14021) thick, with shutter of style member size of 85mm x 44.45 x 2.00mm thick (Jindal section 19560), Top/bottom rail of member size 114.30mm x 44.45 x 2.15mm (Jindal section 19574) and lock rail of member size 100mm x 44.45mm x 2.0mm thick (jindal section 19564) with rubber gasket and aluminium glazing clip beading and 100mm mortice locking arrangement ,handle, tower bolt 200mm long per shutter, rollers, etc complete all as specified and directed.

S&F Powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92mm x 31.75mm x 1.5mm thickness weight of 1.07Kg/m (Section No 20831 of jindal) and f shutter size 40mm x 18mm (with 9.00 mm interlocking legs) x 1.45 mm thickness (section no 20737 of jindal) Section two shutter glazed,covering half of span of opening each & one shutter section gauged covering half of span of opening) including provn for making window air light including 95mm aluminium handle with spring lock, stainless steel wire cloth 0.45 mm nominal dia of wire and average width of apperture 1.4mm and fixed with steel wire staples & 5 mm thick plain glass including necessary fitting and fixturre, aluminium snap beading complete all as specified and directed. Note - Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixture and no cost extra shall be paid separately. Cost of glass and wire cloth included herein before.

M&L Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M&L TMT Bars 6 to 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed.

M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L Mild Steel Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed.

M&L Cement Concrete type D2(1:4:8) using 40mm graded crushed stone aggregate 100mm thick as in sub base of floor, foundation filling, path/hard standing etc complete all as specified and as directed.

M&L 100mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in sub base complete all as specified.

M&L Cement Concrete type B0 (1:2:4) (12.5mm graded stone aggregate) 25mm thick, in Flooring, finishing concrete surfaces fair and even to receive floor finishes, complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.36 sqm but not exc 1.0 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed.

M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, complete all as specified and as directed.

M&L rubber moulded Machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 50 mm sand cushion over rammed earth complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 50 mm sand cushion over rammed earth complete all as specified and as directed.

M&L for relaying of paver block in patcheswith grey cement and pigment, including removing and cleaning of old paver block, preparing beds and laying or setting over rammed earth, complete all as specified and as directed.

M&L Prepolished cement concrete chequered tiles of size 300 x 300 x 20 to 25 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in cement mortar 1:6 for laying floor finishes , complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Stripping of old tarfelt including layer of plaster or morter of any type treatement carefully from roof surfaces (without damage of roof) and roughening of surface of old concrete roofing by picking sweeping cleaning and washing down with water to remove dust as directed and specified.

M&L Cement Concrete Type B0 (1:2:4) (20mm graded crushed stone aggregate) as in bed over roof kerb mud stop alongwith water proofing compound as per manufacturer's instruction, complete all as specified and directed. Note:- WPC shall be measured and paid seprately.

Materials and labour for 20 mm thick screed bed of bedding layer in CM 1:4 surface finished even and smooth without using extra cement for padding including neat cement slurry @ 3.0 kg per Sqm complete all as specified and directed.

M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Preparing and cleaning of fully dry surface as per IS:3067-1966. (b) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.40 Litre per Sqm. (c) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.00 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (d) Applying one coat of Aluminium Paint @ 0.11 Litre per Sqm over APP based Polymeric Membrane.

M&L Cutting Holes in Brick Walls, built in Cement Mortar for Taking Out or Inserting Holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1as required in exc. Half Brick but not exc. One Brick thick Walls, complete all as specified and as directed.

M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces even & smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete external surfaces in two layers (each 10+5 mm thick) finished even and smooth without using extra cement using water proofing compound on top layer as per manufactures instruction on external wall surface complete all as specified and directed.

M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smooth without using extra cement complete all as specified and directed.

"Supply only" liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L Preparing new Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 2.0mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint Weather Coat over a coat of alklai resistance Primer (as per Manufacturer’s instructions), complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing new brick, stone or concrete Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Primer, complete all as specified and as directed.

M&L 150mm bore Reinforced concrete RCC hume pipes, class NP2, laid and jointed complete with collars complete all as directed by Engr-in-Charge

M&L for Concrete bed Type C-2 (1:3:6) (Using 40mm graded crushed stone aggregate) to 150mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F PVC (SWR) Soil Pipe 110 mm bore (dia) for sewage and rain water pipes, single socketed, in any length with Rubber Ring Joints fixed to Walls, including dismantling of old one complete all as specified and as directed.

S&F CPVC pipes 32 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to G+9 stories height of bldgs. complete as all specified and as directed. Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly.

S&F CPVC pipes 40 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to G+9 stories height of bldgs. complete as all specified and as directed. Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly.

S&F CPVC pipes 50 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to G+9 stories height of bldgs. complete as all specified and as directed. Note:- Work to be executed in G+9 storey bldg, rates to bequoted accordingly.

S&F in repair 32mm bore brass MTA for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 32mm bore brass FTA for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 32mm bore brass elbow for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 32mm bore brass Tee for CPVC pipe as in repair complete all as specified and directed.

S&F 32mm bore dia CPVC Ball valves long handle screwed for CPVC pipe and fixed as in repair complete all as specified and directed.

S&F in repair 40mm bore brass MTA for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 40mm bore brass FTA for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 40mm bore brass elbow for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 40mm bore brass Tee for CPVC pipe as in repair complete all as specified and directed.

S&F 40mm bore dia PVC Ball valves long handle screwed for CPVC pipe and fixed as in repair complete all as specified and directed.

S&F in repair 50mm bore brass MTA for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 50mm bore brass FTA for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 50mm bore brass elbow for CPVC pipe as in repair complete all as specified and directed.

S&F in repair 50mm bore brass Tee for CPVC pipe as in repair complete all as specified and directed.

S&F 50mm bore dia PVC Ball valves long handle screwed for CPVC pipe and fixed as in repair complete all as specified and directed.

Disconnecting existing tanks of capacity 5000 liters setting aside (or lowering, hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation around the over head tank after opening tank cover, inlet, outlet etc and reconnecting with GI/CPVC tubing and re-fixing in position ,refixing the tank including cover after cleaning in position , write date of cleaning by synthetic enamel paint on tank complete all and specified and directed.

M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including fabricated 1.6 mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly including cutting chases, pinning in making good the surface with CM (1:3) and finsishes all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.

All as per item No 84.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge.

All as per item No. 84.00 here-in-before but one 3 pin 5 amps switch socket outlet on the independent board with other switch complete all as specified and directed by Engineer-in-charge.

S&F Switch piano, flush type, SP, one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed.

S&F Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flush type complete all as specified and as directed.

S&F Socket outlet 3/5 pin, 6 Amps, 240 volt flush type complete all as specified and as directed.

S&F Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

S&F Brushless DC (BLDC) ceiling fan 1200mm sweep maximum 26W with operating voltage 140v-240v AC 50 Hz, Max -360RPM, white colour without remote control operated, 5 star energy saving rating (minimum 5 Year warranty) complete all as specified and as directed.

S&F Energy efficient LED fittings of capacity 1 x 20W suspended type / wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed.

S&F Sheet metal enclosure for DB's when MCBs to be used 4 way single pole and neutral double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed.

S&F MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve breaking capacity 10 kA complete all as specified and as directed.

S&F MCB 32 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 6 Sqmm 2 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge.

Shree Mahabir Builders (BID ID -3466486)

BHARUKA ENTERPRISES (BID ID -3467427)

ARJUN DAS VALECHA (BID ID -3466241)

DEEPAK KHATTAR (BID ID -3466411)

Tirupati Buildcon Pvt. Ltd. (BID ID -3464171)

UNITED ENGINEERS (BID ID -3465449)

UNIVERSAL TRADING CENTRE (BID ID -3466391)

ARATI TRADING CO (BID ID -3467552)