Providing Reflector Name Board to the streets at ward no 84 Central Zone

Supplying and Fixing of Digitally Printed Retroreflective Single Arrow Sign board of size 1595mm x 900mm made of Type XI grade cube corner micro prismatic grade sheeting confirming to IRC 67-2012 as per ASTMD-4956-09 Specifications, Digitally Printed using Latex Printer for Traffic Colour logos/text and laminated with UV Resistant clear electro-cut film and applied to proper prepared sign substrate made of 4mm thick Aluminum Composite Material (ACM) with 0.25mm aluminium skin thick on both sides and back support frame angle of 25mm x 25mmx3mm Supported by 32NB, 2.7mm Thick Stainless steel pipe all round in 304 grade and 2 nos. of vertical posts of 65NB, 3.04mm thick stainless steel pipe of 304 grade firmly fixed to the found by means of properly designed foundation of size 1000 mm x 450 mm x 450 mm and providing Cocrete support above the ground level of size 1000mm x 450 mm x 150mm with M15 Grade cement concrete and the item shall include earthwork excavation,Centering with steel centering for revetment, drain and culvert upto 1.20m depth using MS sheet of size 0.90X0.60m 10 gauge thick, cost of materials, loading, unloading, lead, lift, transportation etc, complete as per approved template. the concrete supprt above the ground level must be painted with Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour complete as per standard specification. - 10 sq.m. The signs shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufactured and supplied by the reflective sheeting manufacturer .Digitally printed traffic colour (red, blue, green, yellow, orange and brown) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflection established for its colour and type of sheeting as given in Table 6.9 of IRC 67- 2012.The coefficient of retro reflection after the stipulated warranty period shall be minimum 80 percent of the initial value of the printed sign (initial value shall be minimum 70% of the values given in table 6.9 of IRC 67-2012). Match component system warranty for the components like retro-reflective sheeting, overlay films and digital inks shall be provided by the manufacturer The Retro reflective sheeting shall be covered under 10 years warranty issued for field performance and certified copy of completed three years outdoor exposure report shall be obtained by the engineer-in-charge. The warranty shall be inclusive of digitally printed logos/text/legends and their bonding to the retro-reflective sheeting (as per MoRT&H Specification No.801). The latex printer used for digital printing should be used with Inks of low VOC emission and should have Greenguard, eco logo certificate as per UL 2801 Standards.The warranty & Test certificates shall be obtained from the retro-reflective sheeting manufacturer by the contractor and shall be submitted to engineer-in-charge.

Add :- GST @ 18%