Repairing of samaj ghar Tamang Gaon,Cocomendo samaj, Lamahatta GP

Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) form roof or wall after unscrewing bolts, nuts, screws etc. and stacking the marerial at site as directed. (Payment to be made on measurement of portion of roof or wall removed.).

Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugaion minimum side lap. ( payment to be made on area of finished work). (GCI sheet to be supplied by contractor).

Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugaion minimum side lap. ( payment to be made on area of finished work). (GCI sheet to be supplied by contractor)

Galvanised iron sheet ridging fitted with necessary bolt, screws, washers etc complete. (225 mm end lapping).

Galvanized iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm.M.S.flat bar clamps bent to design, bolts. Nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping).

Panel shutters of door and window, as per design (each panel consisting of single plank with out joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, panel rate of reduction of 20% will be made).

Taking out shutter of door and window, dismantaling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fitting but with new screws as necessary.( where different part of same shutter are renewed under different item, payment under item 73 will be made once only).

Colouring of whole structure,other unseen work

Add GST 18%

Add Cess 1%